HRS KW30-6S-1V(800)
Price:
Negotiable
MOQ:
800
Delivery Time:
14-26 weeks
Brand:
KW30-6S-1V(800)
Product Description
Product Overview
The KW30 Series connectors are 1mm pitch, single-row, center-lock, wire-to-board connectors, UL/C-UL Listed. They are designed for reliable connections in various electronic applications.
Usage Precautions:
- Recommended temperature profile for reflow soldering: Peak 250C Max. for 10 sec., Heating 220C Min. for 60 sec., Preheating 150-180C for 90-120 sec. Maximum 2 reflow cycles.
- Soldering iron temperature: 35010C, within 5 seconds.
- Recommended metal mask thickness: 0.1mm, Aperture Ratio: 100%.
- Board warpage: Maximum of 0.02mm at the center of the connector.
- IPA cleaning is allowed. Other cleaning agents require Hirose consultation.
- Avoid excessive pull force during unmating.
- Always turn off power before reinserting the connector.
- Do not touch terminals when electricity is flowing.
- Contact Hirose for cable assembly procedures or handling manuals.
- Specifications are reference values; review Drawing and Product Specifications sheets for ordering/usage.
- Use appropriate cables; contact Hirose for non-specified cables.
- Usage of non-Hirose identified jigs & tools may affect warranty.
- Contact Hirose for applications demanding high reliability (automotive, medical, etc.).
Crimping Precautions:
- Required documents prior to crimping include: Main Unit Instruction Manual, Applicator Instruction Manual, Applicator Spare Parts List, Crimp Conditions, Crimp Quality Standards, Hand Tool Operating Instructions, and Cable Assembly Procedures.
- Use tools designated by Hirose; non-specified tools are outside warranty.
- Applicable cables are tin-plated, soft copper stranded wires. Avoid solid wire, wires with polyester threads, or tin-coated wires. Do not crimp two cables together.
- Crimp height settings may vary based on core wire configuration.
- Contact Hirose for high/low temperature operating environment design.
Brand
HIROSE
Series
KW30 Series
Pitch
1mm
Configuration
Single Row, Center Lock, Wire-to-Board
Certifications
UL/C-UL Listed
UL/C-UL File No.
E132750
| Specification | Conditions | 28 AWG | 30 AWG | 32 AWG |
|---|---|---|---|---|
| Rated Current (Note 1) | (2mm Pitch) | 1A | 1A | 0.8A |
| Rated Current (UL/c-UL) (Note 1) | 1A | 1A | 0.8A | |
| Rated Voltage | 100V AC/DC | |||
| Operating Temperature (Note 2) | -55 to +105C | |||
| Operating Humidity Range (Note 3) | 20 to 80% | |||
| Storage Temperature Range (Note 4) | -10 to +60C | |||
| Storage Humidity Range (Note 3) (Note 4) | 40 to 70% | |||
| Insulation Resistance | Measured at 250V DC | 100M Min. | ||
| Withstanding Voltage | 500V AC for 1 min. | No flashover or insulation breakdown | ||
| Contact Resistance | Measured at 10mA, 20mV AC | 30m Max. | ||
| Mating Durability | 30 times | Contact Resistance: 50m Max. | ||
| Vibration Resistance | Frequency 10 to 55Hz, single amplitude 1.52mm, at 2 hours for 3 directions | No electrical discontinuity of 1s or more, Contact Resistance: 50m Max. | ||
| Shock Resistance | Accelerated velocity: 490 m/s, for 11ms, half-sine wave in 3 directions, 3 times for each direction | No electrical discontinuity of 1s or more, Contact Resistance: 50m Max. | ||
| Moisture Resistance (Steady State) | Left for 240 hours at temperature of 402C and humidity of 90 to 95% | Contact Resistance: 50m Max., Insulation Resistance: 100M Min. | ||
| Temperature Cycles | Temperature: -55 to +105C, Time: 30 min. for 25 cycles | Contact Resistance: 50m Max., Insulation Resistance: 100M Min. | ||
| Soldering Heat Resistance | Reflow: See the recommended temperature profile | No deformation of the insulator parts affecting performance. | ||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales