HCTL HC-CB1.25-T
Price:
Negotiable
MOQ:
10
Delivery Time:
1 working day
Brand:
HC-CB1.25-T
Product Description
Product Overview
The CB 1.25 series connector strip is designed for reliable electrical connections. It is suitable for use in a wide range of environmental conditions and applications requiring specific electrical and mechanical performance characteristics. The product is characterized by its thin profile and double-row configuration.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Certifications: UL94V-O (for Housing Plastic)
Technical Specifications
| Section | Item | Specification | Requirement | Test Method |
|---|---|---|---|---|
| 3. Use Condition | Ambient temperature Range | -25 85 | ||
| 3. Use Condition | Applicable Wire Sizes | AWG #2832 | ||
| 3. Use Condition | Applicable PC board thick:ness | 0.6l.2mm | ||
| 4. Appearance and Dimension | Appearance | Product surface without defect dirtcrackand mechanical damage, Contact without rust plating not oxides and not peeled | ||
| 4. Appearance and Dimension | Dimension | According to drawings | ||
| 4. Appearance and Dimension | Exchangeable | Exchangeable with same specification products. | ||
| 5. Material | Terminal Contact | Phosphor bronze, Thickness 0.15mm, Tin plating:35 m | ||
| 5. Material | Terminal Contact | Phosphor bronze, Thickness 0.2mm, Tin plating:35 m | ||
| 5. Material | Terminal Contact | Phosphor bronze, Thickness 0.3mm, Tin plating:35 m | ||
| 5. Material | Housing Plastic | PBT UL94V-O, Color: White | ||
| 5. Material | Wafer | Nylon6T UL94V-O, Color: Beige | ||
| 6. Electrical Performance | Rated Voltage | 125V AC DC | ||
| 6. Electrical Performance | Rated Current | 1A AC DC | ||
| 6. Electrical Performance | Contact Resistance | Initial value 20 | A maximum voltage of 20m V and maximum current of 1OOmA are applied to the Mate connector | |
| 6. Electrical Performance | Insulation Resistance | lOOM | Apply 500V DC(rms) for I minute between adjacent contacts to measure the insulation resistance | |
| 6. Electrical Performance | Withstand voltage | No breakdown or flashover | Apply 100V AC(rms)for I minute and the leakage current shall not exceed 0.5mA to the adjacent termina1 and ground of the mate connectors | |
| 7. Mechanical Performance | Single contact insertion force | Less than 3N | 3N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| 7. Mechanical Performance | Terminal crimping Wire strength | 10N (AWG#28), 8N (AWG#30), 6N (AWG#32) | Axial per minute to 25 3mm rate of the pullout force | |
| 7. Mechanical Performance | Pin Retention Force | 13N (Pin) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit | |
| 7. Mechanical Performance | Fixed terminals And hole seat | 8N | The terminal and the hole seat at a react per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity | |
| 7. Mechanical Performance | Durability | Contact Resistance 30m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test | |
| 7. Mechanical Performance | Vibration | Current Discontinuity: 1 sec Max, Contact Resistance 30m | Amplitude 1.5mm p-p, Frequency :10-55-1O Hz/minute, Period: 2hour for each direction | |
| 8. Endurance Characteristics | Thermal Aging | Contact Resistance 30m | Temperature852, Period96 hours continuously | |
| 8. Endurance Characteristics | Temperature rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed | ||
| 8. Endurance Characteristics | Constant Humidity | Appearance: No damage, Contact Resistance 30m , Insulation Resistance 50m | Relative humidity90-95%RH, Period96 hours continuously | |
| 8. Endurance Characteristics | Temperature cycling | No breakdown or flashover | One cycle consists of -55 3 C 30min, 853C 30min, room temp 10-15min, Total cycle :5cycle | |
| 8. Endurance Characteristics | Salt spray | Appearance: No damage, Contact Resistance 30m | Temperature : 35 3 C, Concentration: 5 1 %, Period: Before plating stamping 48 hours, After stamping plating 8 hours | |
| 8. Endurance Characteristics | Solder ability | Area of soldering: 90 % | Solder temperature 245 5C, Immersion period:3 0.5S | |
| 8. Endurance Characteristics | Resistance to soldering heat | Appearance: No damage | Soldering time30.5S, Soldering pot3505, Position: SMT type needle solder, 0.5mm distance |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales