TE Connectivity 343445-2
Product Requirements and Specifications
This section details the requirements for handling, storage, and preparation of the product, along with its technical specifications for proper application.
Safety
Do not stack product shipping containers so high that the containers buckle or deform.
Storage - Ultraviolet Light
Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the product material.
Storage - Shelf Life
The product should remain in the shipping containers until ready for use to prevent deformation to components. The product should be used on a first in, first out basis to avoid storage contamination that could adversely affect performance.
Storage - Chemical Exposure
Do not store product near any chemical listed below as they may cause stress corrosion cracking in the material: Alkalies, Amines, Carbonates, Sulfur Compounds, Ammonia, Citrates, Nitrites, Tartrates, Phosphates, Sulfur Nitrites.
| Specification | Value | Unit |
|---|---|---|
| Wire Size Accepted | 1.0 - 2.0 | mm |
| Insulation Diameter Accepted | 2.0 - 2.7 | mm |
| Stabilizer Barrel Crimp Limits | See Figure 3 | |
| Stabilizer Barrel Flash Limit | 0.1 | |
| Insulation Barrel Crimp Limits | See Figure 3 | |
| PC Board Hole Size Limits | See Figure 3 | |
| Cutoff Tab Limit | 0.40 | |
| Burr Limit | 0.10 | |
| Wire End Extension (Maximum) | 0.40 | |
| Locking Lance Limits | See Figure 4 |
| Crimp Type | Crimp Width | Crimp Height | Insulation Barrel Width | PC Board Hole Size Width |
|---|---|---|---|---|
| Stabilizer Barrel Crimp | 2.28 | 1.65-1.80 | ||
| Insulation Barrel Crimp | 2.79 | 2.40 + .05 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.