SHOU HAN TYPE-C 24P-GTJB 040
Price:
Negotiable
MOQ:
20
Delivery Time:
1 working day
Brand:
TYPE-C 24P-GTJB 040
Product Description
Product Overview
This specification sheet details the TYPE-C 24P-GTJB 040 connector from Shenzhen Shouhan Technology Co., Ltd. It outlines the product's technical specifications, including electrical, mechanical, and durability performance, designed for various applications requiring reliable Type-C connectivity.
Product Attributes
- Brand: (Shenzhen Shouhan Technology Co., Ltd.)
- Model: TYPE-C 24P-GTJB 040
- Origin: China
Technical Specifications
| Category | Item | Test Conditions | Performance (Specification) |
|---|---|---|---|
| RATING | PRACTICAL TEMPERATURE RANGE | -30~80C | Within -30~80C |
| RATING | DC 20V 3A | ||
| MECHANICAL | CONNECTION FORCE | Measurement after connecting and disconnecting using standard plug gauge 3 times. | 5-20N |
| DISCONNECTION FORCE | Measurement after connecting and disconnecting using standard plug gauge 3 times. | 8~20N | |
| MECHANICAL | TERMINAL STRENGTH | A static load of 0.1N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. | No damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. |
| ELECTRICAL | CONTACT RESISTANCE | Measured at small current (100mA or less) 1000Hz | 40m MAX |
| INSULATION RESISTANCE | Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100M MIN | |
| DIELECTRIC STRENGTH | AC 100V rms (50~60Hz) for 1 min, Trip Current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Without damage to parts, arcing or breakdown etc. | |
| DURABILITY | SOLDERA-BILITY TEST | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. | (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%. |
| RESISTANCE TO SOLDERING HEAT TEST (REFLOW) | Preheat: 180.120s. Tallest Temperature: 2605 within 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| DURABILITY | RESISTANCE TO SOLDERING HEAT TEST (SOLDERING IRON) | Bit temperature 3305, application time 30.5 seconds. However, excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| DURABILITY | HUMIDITY TEST | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | |
| DURABILITY | HEAT TEST | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| DURABILITY | COLD TEST | Stored at -253 for 96 hours, then subjected to controlled recovery conditions for 1 Hr. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| DURABILITY | LIFE TEST (WITHOUT LOAD) | Connection and disconnection for 5000 cycles at a speed of 10 to 25 cycles/min. | |
| LIFE TEST (WITH LOAD) | At rating condition (non-inductive load), connection and disconnection for 5000 cycles at a speed of 10 to 20 cycles/min. | (1) Contact resistance 0.1 (2) Disconnection force 0.8 to 2.0N (3) Other: Mechanical and electrical characteristics shall be satisfied. | |
| DURABILITY | TEMPERATURE CYCLING TEST | 5 cycles of specified conditions, then allowed to remain in room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: MAX.30m. Insulation Resistance: MIN.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| DURABILITY | COLD & HEAT SHOCK TEST | 5 cycles of specified conditions, then allowed to remain in room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: MAX.30m. Insulation Resistance: MIN.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales