SHOU HAN AF 180°ZJZB13.0
Price:
Negotiable
MOQ:
1
Delivery Time:
1 working day
Brand:
AF 180°ZJZB13.0
Product Description
Product Overview
This specification outlines the requirements for the USB AF 180ZJZB13.0, a product from Shenzhen Shouhan Technology Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, designed for operation within a specific temperature range and under standard atmospheric conditions.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO., LTD)
- Origin: China
- Model: AF 180ZJZB13.0
- Part No: AF 180ZJZB13.0
- Material Code: USB
Technical Specifications
| Item | Test Conditions | Performance | Specification |
| RATING | |||
| Rated Value | DC 30V 1.5A | ||
| PRACTICAL TEMPERATURE RANGE | |||
| Usage Temperature Range | -25~85C | ||
| STANDARD ATMOSPHEIC CONDITIONS | |||
| (1) Temperature | 5 TO 35 | ||
| (2) Humidity | 45% TO 85% | ||
| (3) Pressure | 86Kpa TO 106Kpa | ||
| MECHANICAL | |||
| CONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times. | Measurement | 3.57Kgf MAX |
| DISCONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times. | Measurement | 0.7Kgf MIN |
| TERMINAL STRENGTH | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | Performance | No cracks, looseness, or abnormal play in terminals. Satisfies mechanical and electrical characteristics. |
| ELECTRICAL | |||
| CONTACT RESISTANCE | Measured at small current (100mA or less) 1000Hz | Measurement | 30m MAX |
| INSULATION RESISTANCE | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Measurement | 1000M MIN |
| DIELECTRIC STRENGTH | AC 500V rms(50~60Hz) for 1 min Trip Current:0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Measurement | No damage to parts, arcing, or breakdown etc. |
| DURABILITY | |||
| SOLDERABILITY TEST | (1) The top of the terminals shall be dipped 1mm in the solder bath of 2305 for 30.5 seconds. (2) The area of soldering should be over 75%. | Performance | Solder wetting time shall be 3 seconds or less. |
| RESISTANCE TO SOLDERING HEAT TEST | Soldering iron method: Bit temperature 3305 Application time of soldering iron 30.5 sec. However, excessive pressure shall not be applied to the terminal. | Performance | No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| HUMIDITY TEST | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | ||
| HEAT TEST | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to controlled recovery. | Performance | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| COLD TEST | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to controlled recovery conditions for 1 hour after which. | Performance | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| LIFE TEST | Connection and disconnection shall be made 5000 cycles at a speed of 10 to 20 cycles/min (without load). Connection and disconnection shall be made with the mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min (at rating condition, non-inductive load). | Performance | (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.7 to 2.0Kgf (3) Other: Satisfies mechanical and electrical characteristics. |
| TEMPERATURE CYCLING TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. Temp(): 70 (8 hours), 0 (0.5 hours) -20 (1 cycle) | Performance | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| COLD & HEAT SHOCK TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. Temp(): 70 (0.5 hours), -20 (0.5 hours), 1 cycle | Performance | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales