SHOU HAN TYPE-C 16P CB0.8 073
Price:
Negotiable
MOQ:
20
Delivery Time:
1 working day
Brand:
TYPE-C 16P CB0.8 073
Product Description
Product Overview
This document outlines the specifications for the TYPE-C 16P CB0.8 073 connector from SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD. It details the product's electrical, mechanical, and durability characteristics, designed for reliable performance within a specified temperature range.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Name: TYPE-C 16P CB0.8 073
- Material Code: RATING DC5V 3A
Technical Specifications
| Item | Test Conditions | Performance | Specification |
| RATING | |||
| DC5V 3A | |||
| PRACTICAL TEMPERATURE RANGE | |||
| -25~85C | |||
| STANDARD ATMOSPHEIC CONDITIONS | |||
| (1) Temperature | 5C TO 35 | ||
| (2) Humidity | 45% TO 85% | ||
| (3) Pressure | 86Kpa TO 106Kpa | ||
| MECHANICAL | |||
| 1. CONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times. | 0.5-1.5Kgf | |
| 2. DISCONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times. | 0.8-1.5Kgf | |
| 3. TERMINAL STRENGTH | A static load of 0.1N/m(1kgf/cm) applied to the tip of the terminal for 1 min in any direction. No damage such as cracks, looseness or play. | Satisfied mechanical and electrical characteristics. | |
| ELECTRICAL | |||
| 3.1 CONTACT RESISTANCE | Measured at small current (100mA or less) at 1000Hz. | 40m MAX | |
| 3.2 INSULATION RESISTANCE | Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | 100M MIN | |
| 3.3 DIELECTRIC STRENGTH | AC 100V rms(50~60Hz) for 1 min, trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | Without damage to parts, arcing or breakdown etc. | |
| DURABILITY | |||
| 4.1 SOLDERABILITY TEST | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. | (1) Solder wetting time | 3 SEC |
| (2) The area of soldering | > 75% | ||
| 4.2 RESISTANCE TO SOLDERING HEAT TEST (REFLOW SOLDERING) | Preheat: Temperature on the copper foil surface should reach 180. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| 4.2 RESISTANCE TO SOLDERING HEAT TEST (SOLDERING IRON METHOD) | Bit temperature 3305, application time of soldering iron 30.5 sec. However, excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| 4.3 HUMIDITY TEST | Stored at a temperature of 402 and a humidity of 90%to 96% for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | Appearance no abnormal. Mechanical and electrical characteristics shall be satisfied. | |
| 4.4 HEAT TEST | Stored at a temperature of 702 for 96 hours, then subjected to controlled recovery for 1 Hr. | Appearance no abnormal. Mechanical and electrical characteristics shall be satisfied. | |
| 4.5 COLD TEST | Stored at a temperature of -253 for 96 hours, then subjected to controlled recovery for 1 Hr. | Appearance no abnormal. Mechanical and electrical characteristics shall be satisfied. | |
| 4.6 LIFE TEST (WITHOUT LOAD) | Connection and disconnection made with mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min. | Satisfied mechanical and electrical characteristics. | |
| 4.6 LIFE TEST (LOAD) | At rating condition (non-inductive load), connection and disconnection made for 5000 cycles at a speed of 10 to 20 cycles/min. | (1) Contact resistance | 0.1 |
| (2) Disconnection force | 0.8 TO 2.0N | ||
| (3) Other | Satisfied mechanical and electrical characteristics. | ||
| 4.7 TEMPERATURE CYCLING TEST | Subjected to 5 cycles of specified conditions, then returned to room ambient for 30 minutes. | Insertion & Extraction Force: | 3 TO 20N |
| Contact Resistance: | MAX.30M | ||
| Insulation Resistance: | MIN.100 M | ||
| Dielectric Withstanding Voltage: | 100VAC/MIN (Between Terminals) | ||
| Product cannot deform or crack. | |||
| 4.8 COLD & HEAT SHOCK TEST | Subjected to 5 cycles of specified conditions, then returned to room ambient for 30 minutes. | Insertion & Extraction Force: | 3 TO 25N |
| Contact Resistance: | MAX.30M | ||
| Insulation Resistance: | MIN.100 M | ||
| Dielectric Withstanding Voltage: | 500VAC/MIN (Between Terminals) | ||
| Product cannot deform or crack. | |||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales