HOOYA USB-307HG-B-SU
Price:
Negotiable
MOQ:
300
Delivery Time:
5-6 weeks
Brand:
USB-307HG-B-SU
Product Description
Product Overview
This document outlines the electrical and environmental performance specifications for the HAS45 connector, likely a USB Type-C connector based on the test methods and specifications referenced (e.g., EIA 364, USB Type-C). It details various performance criteria to ensure reliability and durability under different conditions.
Brand HAOYU (HONG KONG) LIMITED
Document Number SPEC-USB-001
Revision TR
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 7-1 | Insulation Resistance (Unmated) | EIA 364-21C (Apply 100 Volts DC between adjacent contacts and contacts and ground) | 100M minimum |
| 7-2 | Low Level Contact Resistance | EIA 364-23b (100mA max., 20mV Max. open circuit) | 40m(Max) initial for VBUS and GND contacts and all other contacts; delta 10m(Max) after test |
| 7-3 | Dielectric Withstanding Voltage | EIA 364-20 (Subjected to 100VAC (RMS) for 1 minute between adjacent terminals) | There shall be no breakdown |
| 7-4 | Contact current rating | EIA364-70 | 5.0A applied collectively to VBUS pins, 1.25A to VCONN pin, and 0.25A to other contacts. Temperature rise shall not exceed 30C. |
| - | Durability (Type C) | EIA 364-09 (10000 cycles at 200 cycles per hour manually) | Must meet: Contact resistance (delta 10m Max.), Insertion force (5N to 20N), Extraction force (8N to 20N), Visual inspection (no exposed base metal). |
| - | Cable Flexing | EIA 364-41 (100 cycles in 2 planes, 120 degrees, Dimension x=3.7x cable diameter) | No discontinuity over 1 microsecond. No physical damage. |
| - | Cable Pull-Out | EIA-364-38 (40N steady state axial load for 1 minute) | No discontinuity or physical damage. |
| - | Cable Pull-Out (4-axes continuity test) | EIA364-18 | 8N tensile force for 10 seconds in 0, 90, 180, 270 directions. No discontinuity > 1s, no physical damage. |
| - | Temperature Life | EIA 364-17 | 105C without applied voltage for 120 hours. 105C without applied voltage for 72 hours when used as preconditioning in EIA 364-1000.01. Visual inspection. |
| - | Thermal Shock | EIA 364-32 (10 Cycles -55C and +85C. Mated connectors) | No evidence of any physical damage. |
| - | Salt Spray | MIL-STD-202F, Method 101D, Test Condition B (48 hours at 35C with 5% Salt-solution) | 1). Shall meet visual requirement, show no physical damage. 2). Shall meet requirements of additional tests as specified in test sequence in Section 5. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales