HOOYA USB-307HE-B-SU
Price:
Negotiable
MOQ:
300
Delivery Time:
5-6 weeks
Brand:
USB-307HE-B-SU
Product Description
Product Overview
This section details the electrical and environmental performance specifications for the HAS45 connector, adhering to EIA-364 standards.
Brand HAOYU (HONG KONG) LIMITED
Document No. SPEC-USB-001
Revision TR - 41
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 7-1 | Insulation Resistance Unmated | EIA 364-21C: Apply 100 Volts DC between adjacent contacts and contacts and ground. | 100M minimum (unmated) |
| 7-2 | Low Level Contact Resistance | EIA 364-23b: 100mA max., 20mV Max. open circuit at 100mA Max. | 40m(Max) initial for VBUS and GND contacts and all other contacts; delta 10m(Max) after test |
| 7-3 | Dielectric Withstanding Voltage | EIA 364-20: Subjected to 100VAC (RMS) for 1 minute between adjacent terminals. | There shall be no breakdown |
| 7-4 | Contact current rating | EIA364-70 | 5.0A shall be applied collectively to VBUS pins and 1.25 A applied to the VCONN pin and 0.25 A the other contacts. When the currents are applied to the contacts, the temperature rise shall not exceed 30 C at any point on the USB Type-C mated plug and receptacle under test, when measured at an ambient temperature of 25 C. |
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| Cycle Test | Type C | EIA 364-09: 10000 cycles at a rate of 200 cycles per hour manually. | Must meet the following criteria after the cycle test is completed: Contact resistance (40m > delta 10m (Max) after test), Insertion force (5N to 20N), Extraction force (8N to 20N), Visual inspection (no exposed base metal on contacts). |
| Cable Flexing | Cable Flexing | EIA 364-41: 100 cycles in each of 2 planes 120 degree. Dimension x=3.7x cable diameter. | No discontinuity over 1 microsecond during flexing or physical damage allowed. |
| Cable Pull-Out | Cable Pull-Out | EIA-364-38: 40N steady state axial load for 1 minute. | No discontinuity or physical damage allowed. |
| 4-axes continuity test | EIA364-18: 8N tensile force for a period of 10 seconds. The specimen must be subject to 0, 90, 180, 270 direction. | No discontinuity greater than 1s and no physical damage to the specimen (one cable per test). |
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 8 | Temperature Life | EIA 364-17 | 105C without applied voltage for 120 hours. 105C without applied voltage for 72 hours when used as preconditioning in EIA 364-1000.01. Visual inspection, Test shall be done in sequences defined in EIA 364-1000.01. |
| Thermal Shock | EIA 364-32 | 10 Cycles -55C and +85C. The USB 3.0 connectors under test must be mated. There shall be no evidence of any physical damage. | |
| Salt Spray | MIL-STD-202F, Method 101D, Test Condition B | Subject mated connectors to 48 hours at 35C with 5% Salt-solution concentration. 1).Shall meet visual requirement, show no physical damage. 2).Shall meet requirements of additional tests as specified in test sequence in Section 5 EIA 364 - 1000.01 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales