HOOYA USB-306D
Price:
Negotiable
MOQ:
1000
Delivery Time:
5-6 weeks
Brand:
USB-306D
Product Description
Product Overview
This document outlines the specifications for a USB connector, detailing its electrical performance, environmental resistance, and mechanical durability. It is designed for applications requiring reliable data transfer and power delivery.
Brand
HAOYU (HONG KONG) LIMITED
Document Number
SPEC-USB-001
Revision
7.B
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 7-1 Insulation Resistance (Unmated) | Between adjacent contacts and contacts to shell. Apply 100 Volts DC. | EIA 364-21C | 100M minimum |
| 7-2 Low Level Contact Resistance | Initial for VBUS and GND contacts; all other contacts. 100mA max., 20mV max. open circuit. | EIA 364-23b | 40m (Max) initial; delta 10m (Max) after test |
| 7-3 Dielectric Withstanding Voltage | Between adjacent terminals. Subjected to 100VAC (RMS) for 1 minute. | EIA 364-20 | No breakdown |
| 7-4 Contact Current Rating | Current applied collectively to VBUS pins, VCONN pin, and other contacts. Temperature rise not to exceed 30 C. | EIA364-70 | VBUS: 5.0A; VCONN: 1.25A; Others: 0.25A |
| 6-1 Durability | Cycle test for USB Type-C connectors. | EIA 364-09 | 10000 cycles (200 cycles/hour rate) |
| 6-2 Cable Flexing | 100 cycles in each of 2 planes at 120 degrees. Dimension x = 3.7 x cable diameter. | EIA 364-41 | No discontinuity over 1 microsecond |
| 6-3 Cable Pull-Out | 40N steady state axial load for 1 minute. | EIA-364-38 | No discontinuity or physical damage |
| 6-4 4-axes continuity test | 8N tensile force for 10 seconds in 0, 90, 180, 270 directions. | EIA364-18 | No discontinuity > 1s and no physical damage |
| 8-1 Temperature Life | 105 C without applied voltage for 120 hours. Preconditioning for 72 hours. | EIA 364-17 | Visual inspection, test sequences per EIA 364-1000.01 |
| 8-2 Thermal Shock | 10 Cycles -55C and +85C. Mated connectors. | EIA 364-32 | No evidence of physical damage |
| 8-3 Salt Spray | 48 hours at 35C with 5% Salt-solution concentration. Mated connectors. | MIL-STD-202F, Method 101D, Test Condition B | Meet visual and additional test requirements |
| 8-4 Humidity | 25C 3C @ 80% RH to 65C 3C @ 50% RH. | EIA 364-31 | 0.5 /N (Max) for signal pins, 2.5 /N (Max) for power pins |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales