HOOYA USB-306B
Price:
Negotiable
MOQ:
1000
Delivery Time:
5-6 weeks
Brand:
USB-306B
Product Description
Product Overview
This document outlines the specifications for a USB connector, detailing its electrical and environmental performance characteristics.
Brand
HAOYU (HONG KONG) LIMITED
Document Number
SPEC-USB-001
Revision
7.B
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 7-1 Insulation Resistance | Unmated connectors, apply 100Volts DC between adjacent terminals or shell ground. | EIA 364-21C | 100M minimum (unmated) between adjacent contacts and contacts and ground. |
| 7-2 Low Level Contact Resistance | 20mV Max. open circuit at 100mA Max. | EIA 364-23b | 40m(Max) initial for VBUS and GND contacts and all other contacts; delta 10m(Max) after test. |
| 7-3 Dielectric Withstanding Voltage | Subjected to 100VAC (RMS) for 1 minute between adjacent terminals. | EIA 364-20 | There shall be no breakdown. |
| 7-4 Contact current rating | 5.0A shall be applied collectively to VBUS pins and 1.25 A applied to the VCONN pin and 0.25 A the other contacts. When the currents are applied to the contacts, the temperature rise shall not exceed 30 C at any point on the USB Type-C mated plug and receptacle under test, when measured at an ambient temperature of 25 C. | EIA364-70 | - |
| Cycle Test | Type C: 10000 cycles | EIA 364-09 | Must meet the following criteria after the cycle test is completed: Contact resistance (40m > delta 10m (Max) after test), Insertion force (5N to 20N), Extraction force (8N to 20N), Visual inspection (no exposed base metal on contacts). |
| Cable Flexing | 100 cycles in each of 2 planes 120 degree. Dimension x=3.7x cable diameter | EIA 364-41 | No discontinuity over 1 microsecond during flexing or physical damage allowed. |
| Cable Pull-Out | 40N steady state axial load for 1 minute | EIA-364-38 | No discontinuity or physical damage allowed. |
| 4-axes continuity test | 8N tensile force for a period of 10 seconds; The specimen must subject to 0, 90, 180, 270 direction. | EIA364-18 | No discontinuity greater than 1s and no physical damage to the specimen (one cable per test). |
| Temperature Life | 105 C without applied voltage for 120 hours. 105 C without applied voltage for 72 hours when used as preconditioning in EIA 364-1000.01. | EIA 364-17 | Visual inspection, Test shall be done in sequences defined in EIA 364-1000.01. |
| Thermal Shock | 10 Cycles -55C and +85C. The USB 3.0 connectors under test must be mated. | EIA 364-32 | There shall be no evidence of any physical damage. |
| Salt Spray | Subject mated connectors to 48 hours at 35C with 5%-Salt-solution concentration. | MIL-STD-202F, Method 101D, Test Condition B | 1). Shall meet visual requirement, show no physical damage. 2). Shall meet requirements of additional tests as specified in test sequence in Section 5. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales