HOOYA USB-309GC-B-SU
Price:
Negotiable
MOQ:
300
Delivery Time:
5-6 weeks
Brand:
USB-309GC-B-SU
Product Description
Product Overview
This section details the electrical and environmental performance specifications for the HAS45 connector, likely a USB Type-C connector, ensuring reliable operation under various conditions.
Brand HAOYU (HONG KONG) LIMITED
Document Number SPEC-USB-001
Revision TR
Technical Specifications
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 7-1 Insulation Resistance (Unmated) | Between adjacent contacts and contacts and ground. | EIA 364-21C, Apply 100Volts DC | 100M minimum |
| 7-2 Low Level Contact Resistance | Initial for VBUS and GND contacts and all other contacts; delta. | EIA 364-23b, 100mA max., 20mV Max. open circuit | 40m(Max) initial, 10m(Max) after test |
| 7-3 Dielectric Withstanding Voltage | Between adjacent terminals. | EIA 364-20, Subjected to 100VAC (RMS) for 1 minute | There shall be no breakdown |
| 7-4 Contact current rating | When the currents are applied to the contacts, the temperature rise shall not exceed 30 C. | EIA364-70, Ambient temperature 25 C | VBUS: 5.0A, VCONN: 1.25A, Other contacts: 0.25A |
| Cycle Test | Must meet the following criteria after the cycle test is completed. | EIA 364-09, Type C: 10000 cycles, rate of 200 cycles per hour manually | Contact resistance (40m > delta 10m (Max) after test), Insertion force (5N to 20N), Extraction force (8N to 20N), Visual inspection (no exposed base metal on contacts) |
| Cable Flexing | No discontinuity over 1 microsecond during flexing or physical damage allowed. | EIA 364-41, 100 cycles in each of 2 planes 120 degree. Dimension x=3.7x cable diameter | No discontinuity over 1 microsecond |
| Cable Pull-Out | No discontinuity or physical damage allowed. | EIA-364-38, 40N steady state axial load for 1 minute | No discontinuity or physical damage |
| 4-axes continuity test | No discontinuity greater than 1s and no physical damage to the specimen. | EIA-364-38, 8N tensile force for a period of 10 seconds; Subject to 0, 90, 180, 270 direction. | No discontinuity greater than 1s |
| Temperature Life | Visual inspection, Test shall be done in sequences defined in EIA 364-1000.01. | EIA 364-17, 105C without applied voltage for 120 hours. 105C without applied voltage for 72 hours when used as preconditioning in EIA 364-1000.01. | Shall meet visual requirement |
| Thermal Shock | There shall be no evidence of any physical damage. | EIA 364-32, 10 Cycles -55C and +85C. The USB 3.0 connectors under test must be mated. | No physical damage |
| Salt Spray | 1).Shall meet visual requirement, show no physical damage. 2).Shall meet requirements of additional tests as specified in test sequence in Section 5. | MIL-STD-202F, Method 101D, Test Condition B, Subject mated connectors to 48 hours at 35C with 5%-Salt-solution concentration. | Visual inspection, No physical damage |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales