HOOYA USB-310CB
Price:
Negotiable
MOQ:
1400
Delivery Time:
5-6 weeks
Brand:
USB-310CB
Product Description
Product Overview
This section details the electrical and environmental performance specifications for the HS45E product from HAOYU (HONG KONG) LIMITED, adhering to various EIA and MIL-STD test methods.
Brand
HAOYU (HONG KONG) LIMITED
Model/Part Number
SPEC-USB-001
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 7.1 Insulation Resistance | Unmated connectors, apply 100Volts DC between adjacent contacts and contacts and ground. | EIA 364-21C | 100M minimum (unmated) |
| 7.2 Low Level Contact Resistance | 100mA max., 20mV Max. open circuit at 100mA Max. | EIA 364-23b | 40m (Max) initial for VBUS and GND contacts and all other contacts; delta Max. 10m (Max) after test |
| 7.3 Dielectric Withstanding Voltage | Subjected to 100VAC (RMS) for 1 minute between adjacent terminals. | EIA 364-20 | There shall be no breakdown |
| 7.4 Contact Current Rating | 5.0A shall be applied collectively to VBUS pins and 1.25 A applied to the VCONN pin and 0.25 A the other contacts. | EIA364-70 | When the currents are applied to the contacts, the temperature rise shall not exceed 30 C at any point on the USB Type-C mated plug and receptacle under test, when measured at an ambient temperature of 25 C. |
| Cable Durability | Must meet the following criteria after the cycle test is completed: | EIA 364-09 | - Contact resistance (40m > delta 10m (Max) after test) - Insertion force (5N to 20N) - Extraction force (8N to 20N) - Visual inspection (no exposed base metal on contacts) |
| Cable Flexing | No discontinuity over 1 microsecond During flexing or physical damage allowed | EIA 364-41 | 100 cycles in each of 2 planes 120 degree. Dimension x=3.7x cable diameter |
| Cable Pull-Out | No discontinuity or physical damage allowed | EIA-364-38 | 40N steady state axial load for 1 minute |
| 4-axes continuity test | No discontinuity greater than 1s and no physical damage to the specimen (one cable per test) | EIA364-18 | 8N tensile force for a period of 10 seconds Min; The specimen must subject to 0, 90, 180, 270 direction. |
| 8.1 Temperature Life | 105 C without applied voltage for 120 hours. 105 C without applied voltage for 72 hours when used as preconditioning in EIA 364-1000.01. Visual inspection, Test shall be done in sequences defined in EIA 364-1000.01. | EIA 364-17 | 105C for 120 hours. |
| 8.2 Thermal Shock | There shall be no evidence of any physical damage. | EIA 364-32 | 10 Cycles -55C and +85C. The USB 3.0 connectors under test must be mated. |
| 8.3 Salt Spray | 1).Shall meet visual requirement, show no physical damage. 2).Shall meet requirements of additional tests as specified in test sequence in Section 5 | MIL-STD-202F, Method 101D, Test Condition B | Subject mated connectors to 48 hours at 35C with 5% Salt-solution concentration. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales