FG FG-ST-C-FS-16PLS-5.75
Price:
Negotiable
MOQ:
600
Delivery Time:
7-14 working days
Brand:
FG-ST-C-FS-16PLS-5.75
Product Description
Product Overview
This specification covers the requirements for product performance and test methods of USB C TYPE Series Connectors. The product shall be of the design, construction, and physical dimensions specified in the applicable product drawing.
Storage Temperature Range
-20 to +60
Operating Temperature Range
-30 to +80
Humidity
90% Rh max.
Technical Specifications
| Section | Item | Test Description | Test Methods | Requirement |
|---|---|---|---|---|
| 2.0 Rating | Current Rating (VBUS & GND pins) | 5.0A (1.25A/Pin) | ||
| 2.0 Rating | Current Rating (Other pins) | 0.25A/Pin | ||
| 3.0 Test Condition | Temperature Range | +15 to +35 | ||
| 3.0 Test Condition | Humidity Range | 90% Rh max. | ||
| 4.1 | Examination of product (Outward Appearance Structure) | Outward appearance shall be good without such injurious problem. Structure shall be meet the design and dimensional requirements of drawing. | EIA 364-18 | Confirmed by eyes and measuring instruments. |
| 4.2 Electrical Performance | Low Level Contact Resistance | Initial: 40m (Max) after 10000 insertion/extraction cycles: 50 m Maximum | EIA 364-23 (or MIL-STD-1344A, Method 3002.1, Test Condition B) | 40m (Max) at 20mv(max) open circuit at 100mA. Below 50 m after 10000 cycles. |
| 4.2 Electrical Performance | Insulation Resistance | EIA 364-21 (or MIL-STD-202F, Method 302, Test Condition B) | 100 M Minimum (DC 500 V applied for 1 minute) | |
| 4.2 Electrical Performance | Dielectric Withstanding Voltage | EIA 364-20 (or MIL-STD-202F, Method 301, Test Condition B) | No shortcircuiting and damage detected at AC 100 V R.M.S for 1 minute. | |
| 4.3 Mechanical Performance | Insertion Force | EIA 364-13 (Max rate: 12.5mm/min) | 5~20N | |
| 4.3 Mechanical Performance | Extraction Force | EIA 364-13 (Max rate: 12.5mm/min) | 8~20N | |
| 4.3 Mechanical Performance | Durability | No flashover or insulation breakdown. Extraction Force: Initial: 8~20N, After: 6~20N. Contact Resistance: Max.50m. Insertion/Extraction Force data recorded at specific cycles. | EIA 364-09 (10000 cycles at max 500 cycles/hour) | Meet visual requirements. Meet electrical and mechanical requirements after cycles. |
| 4.3 Mechanical Performance | Mechanical Shock | Subject mated connector to 50Gs half-sine shock pulses of 11msec duration. Three shocks in each direction applied along three mutually perpendicular planes (total 18 shocks). | EIA-364-27B | No discontinuities of 1 microsecond or longer duration. |
| 4.3 Mechanical Performance | Vibration | Subject mated connectors to 10~55~10Hz traversed in 1 minute at 1.52mm amplitude for 2 hours each of 3 mutually perpendicular planes. | EIA-364-28 | No discontinuities of 1 microsecond or longer duration. |
| 4.4 Environmental Performance | Thermal Shock | Ten cycles between 30 to +80. | EIA 364-32, Test Condition I (or MIL-202F, Method 107G Condition A) | Shall meet visual requirement, show no physical damage. Shall meet requirements of additional tests as specified in test sequence. |
| 4.4 Environmental Performance | Humidity | 96 Hours (Four complete cycles) | EIA 364-31, Test Condition A Method III (or MIL-202F, Method 103B Test Condition B) | Shall meet visual requirement, show no physical damage. Shall meet requirements of additional tests as specified in test sequence. |
| 4.4 Environmental Performance | Salt Spray | Duration: 48 hours. Environment in accordance with EIA-364-26B Method 101D, Condition B. (Temp: 35C2C, RH: 95~98%, Gas: 51% NaCl by weight) | EIA-364-26B Method 101D, Condition B | Shall meet visual requirement, show no physical damage. Shall meet requirements of additional tests as specified in test sequence. |
| 4.4 Environmental Performance | Temperature Life | Subject mated connectors to temperature life at 80 for 250 hours. | EIA 364-17 Test Condition 3 Method A | Shall meet visual requirement, show no physical damage. Shall meet requirements of additional tests as specified in test sequence. |
| 4.4 Environmental Performance | Solderability | After one hour steam aging. Solder dip technique. | EIA 364-52 | Surface of the portion to be soldered shall at least 95% covered with new solder coating. |
| 4.4 Environmental Performance | Resistance to Soldering Heat (WAVE SOLDERING) | Pre-heat: 80, 60 Seconds. Temperature: 260 5 . Immersion duration: 10 1 sec. | MIL-STD-202F, Method 210A, Test Condition B | No mechanical defect on housing or other parts. |
| 4.4 Environmental Performance | Resistance to Soldering Heat (REFLOW SOLDERING) | Pre-heat: 150(Min)~200(Max) , 60 ~180 Seconds. Temperature: 260 5 . Immersion duration: 10~40 sec. | EIAJ RCX-0101/102 | No mechanical defect on housing or other parts. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales