SHOU HAN SH-U262-061N-4BVC11
Price:
Negotiable
MOQ:
1
Delivery Time:
1 working day
Brand:
SH-U262-061N-4BVC11
Product Description
Product Overview
The SH-U262-061N-4BVC11 is a TYPE-C connector from Shenzhen Shouhan Technology Co., Ltd. It is designed for a rated current of 3A and a voltage of 5V, with a practical operating temperature range of -30C to 80C. This specification sheet details its mechanical, electrical, and durability characteristics, ensuring reliable performance under various conditions.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: China
- Model: SH-U262-061N-4BVC11
- Type: TYPE-C
Technical Specifications
| Item | Test Conditions | Performance | |||
| MECHANICAL | CONNECTION FORCE | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | PLUG GAUGE 3 | CONNECTING FORCE | 5~20N |
| DISCONNECT FORCE | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | PLUG GAUGE 3 | DISCONNECT FORCE | 6~20N | |
| MECHANICAL | TERMINAL STRENGTH | A STATIC LOAD OF 0.1N/m(1kgf/cm)SHALL BE APPLIED TO THE TIP OF THE TERMINAL FOR 1 MIN IN ANY DIRECTION | 1 0.1N/m(1kgf/cm). THERE SHALL BE NO DAMAGE TO THE TERMINAL SUCH AS CRACKS, LOOSENESS OR PLAY ELECTRICAL ,AND MECHANICAL CHARACTERISTICS SHALL BE SATISFIED | TERMINAL STRENGTH | Satisfied |
| ELECTRICAL | CONTACT RESISTANCE | MEASURED AT SMALL CURRENT 100mA OR LESS 1000Hz | 100 m A | CONTACT RESISTANCE | 40m MAX |
| INSULATION RESISTANCE | APPLYA VOLTAGE OF 100V DC FOR 1 MIN TO FOLLOWING PORTIONS AFTER WHICH MEASUREMENT SHALL BE MADE: (1) BETWEEN BODY AND CONDUCTOR (2) BETWEEN CONDUCTORS NOT TO BE CONTACT (3) BETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED | 100V DC 1 1 2 3 | INSULATION RESISTANCE | 100M MIN | |
| DIELECTRIC STRENGTH | AC 100V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA (1) BETWEEN BODY AND CONDUCTOR (2) BETWEEN CONDUCTORS NOT TO BE CONTACL (3) BETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED | AC 100V 50Hz/min 1 0.5mA, : (1) (2) (3) | DIELECTRIC STRENGTH | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC | |
| DURABILITY | SOLDER-ABILITY TEST | THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2505FOR 50.5 SECONDS | 1mm ,2505,5 0.5 | SOLDER WETTING TIME | 3 SEC OR LESS |
| SOLDER-ABILITY TEST | THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2505FOR 50.5 SECONDS | 1mm ,2505,5 0.5 | AREA OF SOLDERING | OVER 75% | |
| DURABILITY | RESISTANCE TO SOLDERING HEAT TEST (REFLOW) | PREHEAT:TEMPERATURE ON THE COPPER FOIL SURFACE SHOULD REACH 180.120S AFTER THE P.C.B ENTERED INTO THE SOLDERING EQUIPMENT. TALLEST TEMPERATURE:TEMPERATURE ON THE COPPER FOIL SURFACE SHOULD REACH THE PEAK TEMPERATURE OF 2605WITH IN 20 SECONDS. | : 180,120s : 260520 | CASE DEFORMATION | WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS |
| RESISTANCE TO SOLDERING HEAT TEST (IRON) | BIT TEMPERATURE 3305 APPLICATION TIME OF SOLDERING IRON30.5 SEC HOWEVER EXCESSIVE PRESSURE SHALL NOT BE APPLIED TO THE TERMINAL | 3305, 30.5 | CASE DEFORMATION | WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS | |
| DURABILITY | HUMIDITY TEST | THE JACK SHALL BE STORED ATA TEMPERATURE OF 402AND A HUMIDITY OF 90%TO 96% FOR 96 Hr,THEN THE JACK SHALL BE MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr FOR OTHER PROCEDURES | 40290~96% Hr 96 1 | APPEARANCE/CHARACTERISTICS | NO DAMAGE, MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED |
| DURABILITY | HEAT TEST | THE JACK SHALL BE STORED ATA TEMPERATURE OF702FOR 96 HOURS AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY MBASURBM | 70296 1 | APPEARANCE/CHARACTERISTICS | NO DAMAGE, MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED |
| DURABILITY | COLD TEST | THE JACK SHALL BE STORED ATA TEMPERATURE OF-253FOR 96 HOURS AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY CONDITIONS FOR 1 HOUR AFTER WHICH | -25396 1 | APPEARANCE/CHARACTERISTICS | NO DAMAGE, MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED |
| DURABILITY | LIFE TEST (WITHOUT LOAD) | CONNECTION AND DISCONNECTION SHALL BE MADE WITH THE MATING PLUGS AND JACKS FOR 3000 CYCLES AT A SPEED OF 10 TO 25 CYCLES/MIN | Plug()1 10-253000 | CONTACT RESISTANCE | 0.1 |
| LIFE TEST (LOAD) | AT RATING CONDITION NON-INDUCTIVE LOAD CONNECTION AND DISCONNECTION SHALL BE MADE 3000 CYCLES AT A SPEED 10 TO 20 CYCLES / MIN | ()1 10-20 3000 | DISCONNECTION FORCE | 0.8 TO 2.0N | |
| LIFE TEST | MECHANICAL AND ELECTRICAL CHARACTERISTICS | SHALL BE SATISFIED | |||
| DURABILITY | TEMPERATURE CYCLING TEST | THE JACK SHALL BE SUB JECTED TO 5 CYCLES OF THE FOLLOWING CONDITIONS SHOWED IN THE FIGURE,AND THEN SHALL RETURNED ALLOWED TO REMAIN IN ROOM AMBIENT CONDITION FOR 30 MINUTES | 5 30 | MOLDED PART | NO DEFORMATION OR CRACKS |
| TEMPERATURE CYCLING TEST | INSERTION & EXTRACTION FORCE | 3 TO 20N | |||
| TEMPERATURE CYCLING TEST | CONTACT RESISTANCE | MAX.30M | |||
| TEMPERATURE CYCLING TEST | INSULATION RESISTANCE | MIN.100 M | |||
| DURABILITY | TEMPERATURE CYCLING TEST | DIELECTRIC WITHSTANDING VOLTAGE | 100VAC/MIN(BETWEEN TERMINALS) | ||
| DURABILITY | COLD&HEAT SHOCK TEST | THEJACKSHALLBESUBJECTEDTO5CYCLESOF THEFOLLOWINGCONDITIONSSHOWED INTHE FIGURE,AND THEN SHALL RETURNED AND ALLOWED TOREMAININROOMAMBIENTCONDITIONFOR 30MINUTES | 530 | MOLDED PART | NO DEFORMATION OR CRACKS |
| COLD&HEAT SHOCK TEST | INSERTION & EXTRACTION FORCE | 3 TO 25N | |||
| COLD&HEAT SHOCK TEST | CONTACT RESISTANCE | MAX.30M | |||
| COLD&HEAT SHOCK TEST | INSULATION RESISTANCE | MIN.100 M | |||
| DURABILITY | COLD&HEAT SHOCK TEST | DIELECTRIC WITHSTANDING VOLTAGE | 500VAC/MIN(BETWEEN TERMINALS) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales