CINCH 142-0761-861
Product Overview
Cinch SMA High Frequency End Launch Connectors are designed for high-frequency applications where proper mounting is critical for optimal performance. These connectors ensure a tight fit against the circuit board edge, with the center contact pin lying parallel and flat against the board, centered on the signal trace. They are suitable for various circuit board thicknesses and are engineered to achieve low VSWR (Voltage Standing Wave Ratio) over a wide bandwidth, typically less than 1.5 up to 18 GHz. The connectors are attached by soldering the legs and center conductor to the pads on the circuit board, with specific trace width adjustments recommended for the transition from coax to microstrip to compensate for the transition and maintain low VSWR.
Product Attributes
- Brand: Cinch Connectivity Solutions
- Product Line: SMA High Frequency End Launch Connectors
- Origin: USA
Technical Specifications
SMA Straight Solder Type for Semi-Rigid Cables
| Part No. | Base Width | Board Thickness | A | B | C | D | E |
|---|---|---|---|---|---|---|---|
| 142-0791-801 | .375 | .062 (1.57) | .073 | .073 | .250 | .440 | .200 |
| 142-0791-811 | .375 | .042 (1.07) | .103 | .103 | .250 | .440 | .200 |
| 142-0791-821 | .375 | .062 (1.57) | .083 | .083 | .250 | .440 | .200 |
| 142-1701-821 | .375 | .062 (1.57) | See Figure 2 below for attachment dimensions | ||||
| 142-1701-831 | .375 | .059 (1.50) | See Figure 2 below for attachment dimensions | ||||
Reference dimensions for 50 Ohm grounded coplanar waveguide using Rogers Corporation RO4003C high frequency substrate laminate
| Part No. | Substrate Thickness | Conductor Thickness | Trace Width A | Ground GapsB | Fig | C | D |
|---|---|---|---|---|---|---|---|
| 142-0761-801 | .0080 (0.203) | .0014 (0.036) | .0155 (0.394) | .0100 (0.254) | 1 | .066 (1.68) | .096 (2.44) |
| 142-0761-811 | .0080 (0.203) | .0014 (0.036) | .0155 (0.394) | .0100 (0.254) | 1 | .066 (1.68) | .096 (2.44) |
| 142-0761-821 | .0160 (0.406) | .0014 (0.036) | .0285 (0.724) | .0100 (0.254) | 1 | .084 (2.13) | .113 (2.87) |
| 142-0761-831 | .0160 (0.406) | .0014 (0.036) | .0285 (0.724) | .0100 (0.254) | 1 | .084 (2.13) | .113 (2.87) |
| 142-0761-841 | .0080 (0.203) | .0014 (0.036) | .0155 (0.394) | .0100 (0.254) | 2 | .066 (1.68) | |
| 142-0761-851 | .0080 (0.203) | .0014 (0.036) | .0155 (0.394) | .0100 (0.254) | 2 | .066 (1.68) | |
| 142-0761-861 | .0160 (0.406) | .0014 (0.036) | .0285 (0.724) | .0100 (0.254) | 2 | .084 (2.13) | |
| 142-0761-871 | .0160 (0.406) | .0014 (0.036) | .0285 (0.724) | .0100 (0.254) | 2 | .084 (2.13) | |
| 142-0761-881 | .0080 (0.203) | .0014 (0.036) | .0155 (0.394) | .0100 (0.254) | 1 | .066 (1.68) | .096 (2.44) |
| 142-0761-891 | .0080 (0.203) | .0014 (0.036) | .0155 (0.394) | .0100 (0.254) | 2 | .066 (1.68) | |
| 142-0771-821 | .0160 (0.406) | .0014 (0.036) | .0285 (0.724) | .0100 (0.254) | 1 | .084 (2.13) | .113 (2.87) |
| 142-0771-831 | .0160 (0.406) | .0014 (0.036) | .0285 (0.724) | .0100 (0.254) | 2 | .084 (2.13) |
Note: All dimensions are in inches (millimeters). These dimensions are given as reference information and further adjustments may be necessary depending upon the application.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.