Amphenol PSASF3130201TR
Product Overview
Function & Usage: The Amphenol SAS/PCIe 4.0 (U.2&U.3) connectors are designed for next-generation servers, offering high-speed data transfer capabilities. They support both Serial Attached SCSI (SAS) at 24Gb/s and Peripheral Component Express (PCIe) at 16GT/s. The 68-position receptacle and header enable the implementation of high-speed SAS hard disk drives (HDDs) and PCIe-based devices. A molded guide post facilitates self-alignment during the mating process.
Advantages: These connectors are compatible with SFF8639 specifications and backward compatible with older SAS connectors (12G, 6G, 3G). They offer flexibility by allowing the same interface to be used for cost-effective HDDs and high-performance SSDs, supporting both SAS and SATA drives. Features like staggered contact lengths enable hot-plugging, and stamped clips provide robust PCB attachment and additional mechanical strength. Molded guideposts compensate for connector misalignment.
Application Scenarios: Ideal for processor and storage blade mezzanine cards, HDD carriers, external storage systems, interposer cards, and server storage solutions.
Technical Specifications - SAS/PCIe 4.0 Receptacle
| Part Number | Application | Orientation | Termination Type | Retainers | Height (mm) | Mount Type | Impedance | Others |
|---|---|---|---|---|---|---|---|---|
| PSAS4F313002XXX | U.2 | Vertical | SMT DIP | - | 8.15 | Top mount | 92 | Wide base |
| PSASF313027XXX | U.2 | Vertical | SMT DIP | - | 8.15 | Top mount | 92 | High durability |
| PSAS4F213002XXX | U.2 | Right Angle | SMT DIP | - | 2.85 | Top mount | 92 | Standard |
| PSAS4F213001XXX | U.2 | Right Angle | SMT DIP | - | 2.85 | Top mount | 92 | Reverse |
| PSAS4F313004XXX | U.2 | Vertical | SMT SMT | - | 8.15 | Top mount | 92 | - |
| PSAS4F313012XXX | U.2 | Vertical | SMT DIP | - | 8.15 | Top mount | 92 | - |
| PSAS4F413001XXX | U.2 | Right Angle | Hybrid DIP | - | 1.75 | Top mount | 92 | - |
| PSAS4F313009XXX | U.2 | Vertical | SMT DIP | Fork-lock | 8.15 | Top mount | 92 | - |
| PSAS4F313001XXX | U.2&U.3 | Vertical | SMT SMT | - | 8.15 | Top mount | 92 | - |
| PSAS4F313007XXX | U.2&U.3 | Vertical | SMT SMT | - | 8.15 | Top mount | 92 | - |
| PSAS4F313008XXX | U.2&U.3 | Vertical | SMT DIP | - | 8.15 | Top mount | 92 | - |
| PSAS4F313011xxx | U.2 | Vertical | SMT DIP | - | 8.15mm | Top Mount | 92 | Wide base |
| PSAS4F313018xxx | U.2&U.3 | Vertical | SMT Fork lock | - | 8.15mm | Top Mount | 85 | - |
| PSAS4F313028xxx | U.2&U.3 | Vertical | SMT SMT | - | 8.15mm | Top Mount | 85 | - |
| PSAS4F213004xxx | U.2 | R/A | SMT DIP | - | 2.85mm | Sink type | 92 | - |
Technical Specifications - SAS/PCIe 4.0 Header
| Part Number | Application | Orientation | Termination Type | Retainers | Height (mm) | Mount Type | Impedance | Others |
|---|---|---|---|---|---|---|---|---|
| PSAS4M313006XXX | U.2 | Vertical | SMT SMT | - | 8.35 | Top mount | 92 | - |
| PSAS4M213008XXX | U.2 | Right Angle | SMT SMT | - | 2.55 | Sink type | 92 | - |
| PSAS4M213002XXX | U.2 | Right Angle | SMT SMT | - | 4.00 | Sink type | 92 | - |
| PSAS4M213001XXX | U.2&U.3 | Right Angle | SMT SMT | - | 2.55 | Sink type | 92 | - |
| PSAS4M213012XXX | U.2&U.3 | Right Angle | SMT SMT | - | - | Straddle Mount | 92 | With SIO pins |
| PSAS4M213018xxx | U.2 | R/A | SMT SMT | - | 5.3mm | Top mount | 85ohm | - |
| PSAS4M213017xxx | U.2 | R/A | SMT SMT | - | 2.75mm | Top mount | 85ohm | - |
Electrical & Mechanical Performance
| Parameter | Specification | Test Method |
|---|---|---|
| Contact Resistance | 30m max. (signal contacts) | EIA 364-23 |
| Current Rating | 1.5A min. per contact (temp rise 30C, power pins P1P15) | EIA 364-70B |
| Insulation Resistance | 1000M min. | EIA 364-21 |
| Mating Force | 59N max. | - |
| Unmating Force | 6N min. | - |
Environmental Specifications
| Parameter | Condition | Test Method |
|---|---|---|
| Humidity | 96 hours at 40C, 90-95% relative humidity | EIA 364-31, Method II, Condition A |
| Temperature Life | 85C for 500 hours | EIA 364-17, Condition III, Method A |
| Thermal Shock | 10 cycles between -55C to +85C | EIA 364-32, Condition I |
| Mixed Flow Gas | samples unmated for 7 days, then mated for 7 days; samples mated for 14 days | EIA 364-65, Class II A |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.