gyro calibration three axis turntable

... for the detection and test of inertial measurement unit, and can also be used for the calibration and measurement of two-dimensional rotation angle of other instruments. The main functions are: 1. Accurate rotation angle of inner ring and outer ring and

... test equipment , which can generate motion excitation such as angular position , angular rate and angular acceleration in three directions to realize the test of the measured parts such as gyro , inertial measurement device and accelerometer.

...axis Inertial Navigation Test Turntable Product Description A certain equipment needs to be calibrated and tested, and a single-axis test turntable system needs to be configured. The base of the single-axis test turntable is required to be fixed on a vertical steel pipe, and the height of the turntable can be adjusted up and down along the steel pipe. Single-axis turntables are mainly used for angle calibration

...turntable inside integrated high-definition optical camera, through the high frequency passive suspension system with active gyro servo system to realize the isolation carrier disturbance and maintain the function of the visual axis stability;The turntable is ...

... environments ● 9 axes offered in same package ● Electronically calibrated axis alignment ● Gyros based on Safran ButterflyGyroTM ● Single-crystal silicon technology ● No intrinsic wear-out effects ● High stability...