iec 60664 1 impulse voltage generator

... 11.4, etc. Technical parameters: Model SN1104 SN1104A (Optional) DC high voltage Max. 12.5kV 6kV Impulse voltage wave Impulse wavefront time: 1.2 µs ± 30 %; Half value of after wave time: 50 µs ± 20 % Please note that the waveform should be checked on

...Impulse Voltages Generator Complied Standards & Clauses for Electric Vehicle Charging Pile Impulse Voltages Generator The Impulse Test Generator conforms to the standard requirements of IEC 60664-1 clause 6.2.2.1, required by IEC 61851-1 clause 12.7 and IEC 61851-23 clause 11.4, etc. It is used to verify that the appliances shall withstand the transient over-voltages to which they may be subjected. The impulse

...Impulse Voltage Generator for Impulse Dielectric Withstand Test for EVCS 1. Introduction The impulse voltage generator has a no-load wave shape corresponding to the 1.2/50ms standard impulse specified in IEC 61180 clause 7.1.2.1. The output impedance of the impluse generator is 500Ω and 2Ω, and test voltage...

... can be adjusted continuously； 4.The accuracy of voltage digital display is ±5% ±3 words; 5. Charge and discharge time setting: 1 second ~ 999 seconds 6. Its accuracy is ±1% 7. Charge and discharge times set: 0 ~ ...

IEC60255-5 Test Equipment Impulse Voltage Test Generator Parameters: Output voltage 12kV (Max) ±5％ Impulse wavefront time: Impulse wavefront time: Impulse wavefront time: 1.2μs ±30％ Half value of after wave time 50μs ±20％ Capacitance 0.8U Output polarity ...

IEC60255-5 Impulse Voltage Test Generator Parameters: Output voltage 12kV (Max) ±5％ Impulse wavefront time: Impulse wavefront time: Impulse wavefront time: 1.2μs ±30％ Half value of after wave time 50μs ±20％ Capacitance 0.8U Output polarity Positive, ...