material flow rate analysis and evaluatio

... is a plastic extruder. It works under the specified temperature to melt the sample by using heating furnace. The melted sample flows out a specified hole under the given load. In plastic producing activities, we usually use the melting index to, under

The KTG113-C oxygen analyzer is used for on-line analysis of oxygen content in building materials Introduction The KTG113-C oxygen analyzer is a high-precision on-line detection and analysis instrument for oxygen content in inert gases, developed by our ...

Technical Paramaters of Ion Chromatography Instrument Product Name IC6200 Ion Chromatography Instrument System Parameters Qualitative repeatability ≤0.5% Quantitative repeatability ≤1.0% Pump System Pump material PEEK Pump flow rate (0.001~10.000) mL/min ...

...rate of building materials. Standard: ISO5660-1:2002 Technical Parameters Power supply voltage AC220V AC 50Hz Maximum operating power ≥5KW Cone heater power ≤5KW Heat output heat 0~120KW/m2 The maximum placement of the sample box 100mm × 100mm × 50mm Exhaust flow rate 0.012m3/s~0.035 m3/s (adjustable) Timing value resolution 1s error <1s/n Oxygen analysis...

...Exchanger Product Description Analysis of heat transfer efficiency The heat transfer efficiency of plate heat exchangers depends on a number of factors, including plate material, flow path design, fluid properties, flow rate and temperature difference. The...

OEM and ODM Acceptable Material Brass and copper element Material analysis Cu≥59% Water pressure testing 1.6MPA Air Pressure Testing 0.6MPA Water flow rate Bath/Shower Mixer18-45 L/min Cartridge Life time 300,000 times Open and Close,WRAS CERTIFICATE Body ...

...: For medical Certificate : ISO 9001/ISO 13485 / ISO 14001 / OHSAS 18001 Description In addition to factors such as tight tolerance, flow rates and wicking capabilities; cleanliness and aesthetics are of paramount importance. For medical device solutions,

... characteristics of the thermoplastic material, for the production and development of important scientific information and a detailed analysis report is to study the rheological properties of the polymer materials, the shear rate viscosity changes,