vapor recompression multiple effect evaporation system

...Vapor Recompression System for Vacuum Salt Making Process Process A multi-effect evaporator , having an upstream and a downstream end, adapted for distillation of water. It comprises a plurality of effects connected in a series manner and arranged into groups. Each group has a common parallel water feed inlet adapted to supply all effects in the group with feed water. The evaporator...

...evaporator multiple effect evaporator mechanical vapor compression evaporator Performance characteristics and scope of application: No waste heat steam emissions, energy-saving effect is very significant, which is equivalent of 10 effect evaporator. Using this technology can achieve to countercurrent washing of secondary steam, therefore the dry matter content in condensed water is far lower than the number of evaporator...

Product Description: The mechanical vapor recompression (MVR) evaporator is a highly efficient evaporator product designed for wastewater and industrial wastewater processing. It is made with durable stainless steel 304/316L material, and is available in ...

Multiple effect energy saving industrial Mechanical Vapor Recompression MVR Evaporator Product Details Introduction Mechanical vapor recompression (MVR) evaporator uses two steam generated in the evaporator, the compressor, pressure, temperature, enthalpy increase, and then sent to the heating chamber of the evaporator...

...,which is different from common single-effect or multi-effect falling film evaporator. MVR is a single evaporator, which integrates multiple-effect falling film evaporator. It evaporates in stages according to the concentration of products required.

Multiple effect falling film concentrated evaporator for juice and jam Features 1.Design Features: High heat transfer coefficient, Thermal vapor re-compression, short residence time 2.Multiple Effects used for the steam economy 3.Operate under vacuum 4....

...means of vaporizing the thin solution through film-falling principle. It introduces continuous production and it features in high concentration ratio (1/5-1/10), large viscosity scope (400CP), good heat-transferring effect, large processing capacity, etc.

...solvent evaporation, allowing simultaneous processing of multiple samples without cross-contamination. Cold trap can effectively capture most of the solvent vapor that is harmful to vacuum pump and provide effective protection for high vacuum oil pump.