HFO Fired Power Plant

1.DESIGNING,SUPPLYING,CONSUILT,INSTALLION,COMMISSION FOR 5MW -100MW POWER PLANT ; 2.HFO ,GAS ,DISEL ,HYDRO.WIND ,SOLAR ,DUAL FUEL ,UNIT GENERATOR SET IS FROM 1MW -4MW; 3.OUTPUT VOLTAGE IS 400V,6KV,11KV 4.RPM:600RPM,700RPM,1000RPM,1500RPM 5.FREQUENCY:50HZ/60HZ 7.WE DESIGN THE POWER PLANT IN LOW INVESTMENTS COST ,LOW MAINTENANCE COST,LOWER OPERATION COST AND SHORT CONSTRUCTION PERIOD, 8.ALMOST ALL THE COMPONENTS CAN BE EXCHANGED ,WARRANTY FOR 8000HOURS RUNING PER YEAR 9

Thermal power plantSPF40R38G8.3W20Diesel Oil Boiler Supply Pump One, SPF three screw pump application Suitable for thermal power plant, glass, cement, asphalt mixing plant, building materials factory, Marine, chemical, pharmaceutical, road asphalt mixing plant, steel plant of blast furnace, high pressure steam boiler and oil-fired boiler, circulating fluidized bed boiler and Marine boiler, shipbuilding industry, diesel engine, such as turbine boiler fuel delivery system or

Diesel type: MAN B&W 8L32/40 Quote:Discount 20% Quatity:4 sets Date of production:10th Feb 2011 Required rules and regulations: GL Fulfilled the IMO standard of Nox emission requirements. According to MAN B&W standards .Relative China National standard General: SXD-MAN B&W8L 32/40 engine is used as marine main proplusive power plant driving controllable pitch propeller through flexible coupling and gear box in a way of one engine and one propeller. Engine will be rigid

Technical specificaiton for Power plant equipments Ⅰ. Gen-set technical specification No. Item Unit Specification 1 Model 　 1250/2000/2500/3500GF 2 Rated power kW 1250/2000/2500/3500 3 Rated rev. rpm 600 4 Rated voltage V 11000 5 Rated current A 229.6 6 Frequency Hz 50Hz 7 Power factor 　 0.8 (lagging) 8 Phase 　 3-phase 9 Voltage fluctuation rate % ±1 10 Frequency (rev.) fluctuation rate % ±0.5 11 Stable voltage regulating rate % ±2.5 12 Stable frequency (rev.) regulating rate

HFO Power Plant Fuel Oil Handling System 1.Fuel Oil Handling System (FOHS) Thermo System undertakes complete Design, Engineering, Supply, Fabrication, Installation, Erection, Testing & Commissioning of FOHS for different type of fuels (HFO, HSD, LDO, Naphtha etc) to be stored. Complete mechanical, electrical and engineering jobs are covered. Typical Fuel Oil Handling System consists of unloading hose, decanting and transfer facilities, pumping and heating unit (if applicable)

1350GF4 50Hz / 60Hz 3 Phase HFO Fired Power Plant For Mining Or Oil Descrition: Utilities and Independent power producers use our 0~60 MW power plants to generate power to the grids in the undeveloped, developing world and in remote areas. These plants are flexible to follow the actual load and produce the necessary electricity typically from diesel oil, heavy fuel oil, bio diesel and bi-fuel. High efficiency, low emissions and proven long-term reliability make our diesel oil

Technical specificaiton for Power plant equipments Ⅰ. Gen-set technical specification No. Item Unit Specification 1 Model 　 1250/2000/2500/3500GF 2 Rated power kW 1250/2000/250003500 3 Rated rev. rpm 600 4 Rated voltage V 11000 5 Rated current A 229.6 6 Frequency Hz 50Hz 7 Power factor 　 0.8 (lagging) 8 Phase 　 3-phase 9 Voltage fluctuation rate % ±1 10 Frequency (rev.) fluctuation rate % ±0.5 11 Stable voltage regulating rate % ±2.5 12 Stable frequency (rev.) regulating rate

HFO Fired Power Plant Exhaust Gas Boiler Module 1.Application Diesel oil or HFO fired generator set power plant Collect the exhaust gas discharged by the diesel engine running, in the mean time , heating the heavy fuel oil using the thermal energy of higher temperature exhaust gas to meet the demand of engine running to the heavy fuel oil 2.Features 2.1 save the energy 2.2 protect the environment 2.3 flexilbe installation

1000GF1 500 / 600 Rpm Steam HFO Fired Power Plant With 3 Phase Alternator Descrition: Utilities and Independent power producers use our 0~60 MW power plants to generate power to the grids in the undeveloped, developing world and in remote areas. These plants are flexible to follow the actual load and produce the necessary electricity typically from diesel oil, heavy fuel oil, bio diesel and bi-fuel. High efficiency, low emissions and proven long-term reliability make our

Technical specificaiton for HFO Power plant equipments Ⅰ. Gen-set technical specification No. Item Unit Specification 1 Model 　 1250/2000/2500/3500GF 2 Rated power kW 1250/2000/250003500 3 Rated rev. rpm 600 4 Rated voltage V 11000 5 Rated current A 229.6 6 Frequency Hz 50Hz 7 Power factor 　 0.8 (lagging) 8 Phase 　 3-phase 9 Voltage fluctuation rate % ±1 10 Frequency (rev.) fluctuation rate % ±0.5 11 Stable voltage regulating rate % ±2.5 12 Stable frequency (rev.) regulating

1. INTRODUCTION The dual-fuel power plants are based on engines that are able to run on natural gas,diesel oil or light oil, heavy fuel oil (HFO)or a number of other liquid fuels, offering the ultimate in fuel flexibility. The ability to switch to the most economical, or available, fuel is of great value in a time of fluctuating fuel prices. Furthermore, the fuel can be switched whilst the engine is operating, for example if the gas supply is interrupted due to the emergency

HFO Power Plant Light Fuel Oil Handling System / Centrifugal Booster Treatment Module CE Main Advantages of the System 1. High reliability 2. Compactedness 3. Simple Operation Light Oil System: Light Oil Unloading Module Light Oil Transmission Module Light Oil Supply&Booster Module HFO System: HFO Transmission Module HFO Purification Module HFO Supply&Booster Module Fuel Oil Unloading Module Fuel Oil Circle Module/Light Oil and HFO Switch Module Lubricating Oil System

1500GF6 500 / 600 Rpm 10 x 2000kW 11kV HFO Power Plant With G300 Generating Sets Applications: cement, textile, mining or oil and gas industries etc. Competitive Advantage: Our experts in application engineering and project management are the key to achieving very short construction times , builds turn-key power plant with an output up to 60MW as base load power plant, peaking power plant or industrial self-captive power plant in cement, textile, mining or oil and gas

Mining , Gas Industries 3 Phase HFO Fired Power Plant 1600GF5 400V 440V 3300V Descrition: Utilities and Independent power producers use our 0~60 MW power plants to generate power to the grids in the undeveloped, developing world and in remote areas. These plants are flexible to follow the actual load and produce the necessary electricity typically from diesel oil, heavy fuel oil, bio diesel and bi-fuel. High efficiency, low emissions and proven long-term reliability make our

Automatic / Munual 2000GF8 HFO Power Plant 3 Ph 500 Rpm / 600 Rpm Descrition: These plants are flexible to follow the actual load and produce the necessary electricity typically from diesel oil, heavy fuel oil, bio diesel and bi-fuel. High efficiency, low emissions and proven long-term reliability make our diesel oil power plants, heavy fuel oil power plant, and bi-fuel power plants suitable for baseload applications. 1.offers a wide range of engines for stationary power

Technical specificaiton for Power plant equipments Ⅰ. Gen-set technical specification No. Item Unit Specification 1 Model 　 1250/2000/2500/3500GF 2 Rated power kW 1250/2000/250003500 3 Rated rev. rpm 600 4 Rated voltage V 11000 5 Rated current A 229.6 6 Frequency Hz 50Hz 7 Power factor 　 0.8 (lagging) 8 Phase 　 3-phase 9 Voltage fluctuation rate % ±1 10 Frequency (rev.) fluctuation rate % ±0.5 11 Stable voltage regulating rate % ±2.5 12 Stable frequency (rev.) regulating rate

Detailed Product Description Technical specificaiton for Power plant equipments Ⅰ. Gen-set technical specification No. Item Unit Specification 1 Model 　 1250/2000/2500/3500GF 2 Rated power kW 1250/2000/2500/3500 3 Rated rev. rpm 600 4 Rated voltage V 11000 5 Rated current A 229.6 6 Frequency Hz 50Hz 7 Power factor 　 0.8 (lagging) 8 Phase 　 3-phase 9 Voltage fluctuation rate % ±1 10 Frequency (rev.) fluctuation rate % ±0.5 11 Stable voltage regulating rate % ±2.5 12 Stable

Technical specificaiton for Power plant equipments Ⅰ. Gen-set technical specification No. Item Unit Specification 1 Model 　 1250/2000/2500/3500GF 2 Rated power kW 1250/2000/2500/3500 3 Rated rev. rpm 600 4 Rated voltage V 11000 5 Rated current A 229.6 6 Frequency Hz 50Hz 7 Power factor 　 0.8 (lagging) 8 Phase 　 3-phase 9 Voltage fluctuation rate % ±1 10 Frequency (rev.) fluctuation rate % ±0.5 11 Stable voltage regulating rate % ±2.5 12 Stable frequency (rev.) regulating rate

Product Description Design,supplying ,erection,testing and commission of HFO/DIESEL/GAS/COAL POWER PLANT UP TO 1000MW INCLUDING OF SUBSTATION Product Feature UNIT RATED POWER:1MW-9MW OUT VOLTAGE:11KV FREQUENCY:50HZ/60HZ RPM:600/750/1000RPM COS=0.8 ENGINE BRAND:MAN.HYUANDAI,CHINA Product Specification / Models HFO GENERATOR SETS DISEL GENERATOR SETS GAS GENERTOR SETS DUAL FUEL GENERATOR SETS Application IN POWER PLANT FROM 5MW TO 1000MW

Water Cooling Generating Sets HFO Fired Power Plant With G8300 11KV / 750Rpm Descrition: These plants are flexible to follow the actual load and produce the necessary electricity typically from diesel oil, heavy fuel oil, bio diesel and bi-fuel. High efficiency, low emissions and proven long-term reliability make our diesel oil power plants, heavy fuel oil power plant, and bi-fuel power plants suitable for baseload applications. Depending on your current load profile, ambient