NTC Temperature Sensor

NTC Type JM Thermometrics Resin-Coated NTC Thermistor With PVC Wires Quick Detail: • Resistant to moisture ingress • Withstands immersion in water at 176F (80C) for >1200 hours while powered with 7.5 VDC using a 10 kΩ resistor without deterioration • Available using any device in the Thermometrics standard DK range • Range of wire length is 9.84 in. to 196.84 in. (250 mm to 5000 mm) (dimension WL in diagram on page 2) • Suitable for use in air conditioning evaporators to

Rugged Surface Temperature Sensor Machined Screw Sensors With Extension Leads Quick Detail: TYPE M6000 Extremely rugged sensor consisting of a hex head machine screw that can be fastened into drilled and tapped holes. All thermistor types < 0.200” OD. Hook-up wire or small diameter shielded / jacketed cable extension leads. Maximum temp. ratings from 60C up to 260C. TYPE M6500 Surface temperature sensor for locations where size and space are critical. Housing consists of a

Self-Adhering Surface NTC Temperature Sensors For Industrial HVACR Applications Quick Detail: Excellent heat transfer Long-term stability Multiple adhesive tape sizes and shapes available Various lengths Temperature ranges from -30 to +70 C. PVC single insulated lead wire, 3x1.5mm cross-sectional profile. Voltage withstand: 750 Vac between the terminals of the connector and the contact tape, for a broadly sinusoidal wave form at 50 Hz, where the max permissible current is 1

Meat Temperature Probe NTC Temperature Sensor Measure The Temperature Of Cooking Foods Quick Detail: The meat probe sensor is used to measure the temperature of cooking foods. Suitable for home appliances and microwave ovens. Description: The meat probe sensor is used to measure the temperature of cooking foods. Suitable for home appliances and microwave ovens. Applications: Home Appliances Microwave Ovens The meat probe sensor is used to measure the temperature of cooking

Corrosion-Resistant Stainless Steel Housing NTC Temperature Sensor / Oven Sensor Quick Detail: Continuous operation up to 200C, excursions to 220C Insulation resistance >100M @ 500V d.c. Accurate temperature measurement Corrosion-resistant stainless steel housing Available using any device in the Thermometrics standard DK range Typical applications include domestic ovens and combination microwave ovens Description: UCHI Glass-encapsulated thermistor housed in a stainless

IP66 Cable Probe Temperature Sensors Long-term Stability With Aluminum , Brass , Copper Quick Detail: IP66 rated Long-term stability Multiple connectors available Good thermal response time Various cable lengths Aluminum, Brass, Copper and PVC sleeve housing options Maximum temperature to +105C Description: UCHI has a breadth of high volume core temperature sensing products for Industrial HVACR applications. UCHI's range of Thermometrics Cable Probe Temperature Sensors

ROHS SUS Immersion Temperature Sensors NTC Temperature Sensor Quick details • Material: stainless steel, brass, titanium, Iconel, Hastelloy • Standard sizes are 0.040 inches to 0.250 inches in diameter • Typical wire sizes #22 to #32 AWG • RoHS compliant options available Description The Series is a versatile general-purpose sensor for temperature measurement of gas, air or liquid. Housing material and size can be specified. Specification STANDARD R/T CURVES AND VALUES

Rugged Immersion Temperature Sensors With Hex Nut Probes Quick details • Typical wire sizes: #22 to #28 AWG • Material: stainless steel, brass, titanium • Straight thread option with or without O-rings • RoHS compliant options available Description Rugged Series of hex nut probes are ideal for many types of liquid temperature measurement. These general purpose sensors are available in a variety of sizes, materials, thread counts, and lead and connector options. Specification

NTC Temperature Sensor Flange Probes For Temperature Mesurement Quick details • Flange can be screwed or riveted in place • Material: stainless steel • Typical wire sizes: #22 to #28 AWG • Available in multiple lead and connector configurations • RoHS compliant options available Description The stainless steel flange probes is an ideal choice for air and gas (open-tip model recommended) or liquid (closed-tip model recommended) temperature measurement. These sensors are

High Stability Refrigerator / Piping / NTC Temperature Sensor Quick details High Stability, High Accuracy, and High Reliability Resistance Values from 1KΩto 200KΩ ±1~5% B-Constant 25/85 from 3000 to 4500K ±1~3% Type I* Heat Exchanger / Air Conditioner Sensor Operating Temp. Range Dissipation Constant Response Time -40 to +105℃ Approx. 2.3 mW/℃ (still air) Approx. 26 sec.(thermal bath) 　 　 Type II* Heat Exchanger / Air Conditioner Sensor Operating Temp. Range Dissipation

Flat High Temperature 10K NTC Temperature Sensor For Industrial 103F34-50W Specifications 1. Electronics specifications R25: 10K Ohm +/-1% B 25/85 : 3435k+/-1% Operating Temperature : -40~120degree Dissipation constance : 7.5mW/C Insulation resistance : DC500V >=100MOHM Rated power : at 25deg,in still air 500mW Thermal time constant : at 25deg,in still air 20sec 2. Overall dimensions unite:mm 3. Environment Test ITEM CONDITIONS SPEC SPEC 3-1 High temperature storage 125deg

Custom Waterproof NTC Temperature Sensor Assembles NTC-103F396-1500CM Specifications 1. Electronics specifications R25: 10K Ohm +/-1% B 25/85 : 3960k+/-1% Operating Temperature : -20~130degree Dissipation constance : >= 2.5mW/C Insulation resistance : DC500V , >=100MOHM Dielectric strength : AC750V ,1min Thermal time constant : in stirred water , 90% response <=15sec MAX 2. Overall dimensions NO ITEM SPECIFICATION MATERIAL 1 Thermistor 10KOhm+/-1% Chip thermistor 2 Probe TPE

High Precision Resistance NTC Temperature Sensor For Air Conditioner Quick details 1. High precision resistance and B value,good consistancey,interchangeable (resistance and B value tolerance can be ±1% 2. High sensitivity,fast response,temperature resistance coefficient can be (2~5)%/℃ 3. High temperature measurement precision 4. Can be encapsulated based on specific installation condition,convenient for users' installation 5. Good insulation,anti bending and anti mechanical

10k 1% 3470 NTC Temperature Sensor Probe Thermometer Waterproof Quick details Stainless steel sheath and waterproof Measurement Range:-30~120 degree Wire length:600mm Probe size : 5x25mm Output: 2 wires XH(2.54) - 2Y Type: NTC 10K+/-1% 3470 Description Stainless steel sheath and waterproof Measurement Range:-30~120 degree Wire length:600mm Probe size : 5x25mm Output: 2 wires XH(2.54) - 2Y Type: NTC 10K+/-1% 3470 Specifications Stainless steel sheath and waterproof Measurement

PT100 Platinum Resister NTC Temperature Sensor Temp Probe Anti-rust Quick details 100% new and high quality Color: As the picture shows Temperature rang: -20 ~ 500 Sensor Dia: 4 X 30 Cable Length: 0.5m External Shielding: Insulated Shielding Internal Insulation: Fiberglass Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Description Probe temperature sensor using original DS18B20, High-quality stainless

Waterproof DS18B20 Digital Temperature Sensor Probe 100cm Wire Cable Quick details 3.0V ~ 5.5V power supply 9 to 12-bit adjustable resolution Wide temperature range -55 *C ~ +125 *C No external components, the unique single-bus interface Output leads: red (VCC), blue (DATA), black (GND) Description Probe temperature sensor using original DS18B20, High-quality stainless steel anti-rust waterproof package,Stainless steel housing (6 * 30mm), lead length 100cm, After rigorous

Stainless Steel DS18b20 Temperature Probe , Waterproof DS18b20 Temperature Sensor Quick details 3.0V ~ 5.5V power supply 9 to 12-bit adjustable resolution Wide temperature range -55 *C ~ +125 *C No external components, the unique single-bus interface Output leads: red (VCC), blue (DATA), black (GND) Description Probe temperature sensor using original DS18B20, High-quality stainless steel anti-rust waterproof package,Stainless steel housing (6 * 30mm), lead length 100cm, After

Dedicated NTC Temperature Sensor High Sensitivity And Fast Response Quick detais •With whole new technology, securing stable performance in long time(annual resistance drift rate ≤1‰). •Resistance and B value in high precision, with good consistency and interchangeability (precision of resistance and B value reach ±1 % respectively). •High sensitivity and fast response. •By using double layer seal technology, featuring fine insulating property and capability to defend against

Thin Film Type NTC Thermistor NTC Temperature Sensor For Home Appliances Quick details • Suittable for narrow space • Rapid response time • Elastic and solder easily • Oprating temperature: -50℃ - 90 ℃ Description NTC Application •Computer •Printer •Home appliances •Narrow temperature detecting space Specification Part Number Identification Product Series Code Resistance @25℃ Tolerance B constance Test temp. Of B Dimension. FT Film type NTC thermistor 202 20x102Ω A ±0.02℃

Highly Accurate Skin Temperature Sensor NTC Temperature Sensor Quick Details *The Skin Temperature Probe (2 m) is specifically designed for temperature monitoring requiring repeatability, high sensitivity and rapid response. *Measurement Specialties patented manufacturing techniques ensure that probes are interchangeable within the same series *Designed for measurement of patient's temperature *Highly accurate skin sensor provides reliable surface temperature readings