IEC Test Equipment

IEC60884-1 Clause 30.1 Figure 41 High Temperature Indentation Device Standard:IEC60884-1-2002 clause 30.1 figure 41,IEC60598- 2-20 clause 20.15, EN60811-3-1 insulating and sheathing materials of electric and optical cables-common test methods. Application:For PVC insulated and sheathed wire and cable products, measure resistance to thermal deformation of PVC insulated and sheathed under the action of thermal and mechanical load, the insulation wire to be measured can be round

High-Speed And High-Power Motor Test Bench For Motor Performance Testing Equipment Single Station Introduction of motor test bench: The high-speed and high-power motor test bench (test system) can be used in various high-speed motor applications such as new energy vehicle drive motors, high-speed air compressor motors, and high-speed magnetic levitation motors. The installation platform can be designed according to the motor to be tested, and the end flange installation

UL817 Cable Testing Equipment Abrupt Pull Test Apparatus With 6 Working Stations UL817: 96.4 Each molded-on representative device is to be secured in the jaws of the flexing machine so that the point of cord exit is at the center of rotation. The rotating jaws are to be adjusted to rotate to an angle of 90° to each side of the centered position. At the centered position, the cord is to hang vertically and the weight, selected in accordance with 96.3, attached to each cord

Electric Vibration Testing System IEC 62133 Battery Testing Equipment Application of Battery Testing Equipment: Vibration encountered of the battery during transportation shall not cause leakage, fire or explosion. The electrodynamic vibration test system is a precision test equipment that simulates the actual working environment of a battery. The vibration test system consists of four parts: vibration test bench, power amplifier, controller and cooling fan. Standard of

IP Testing Equipment IEC 60529 IP1X-IP6X And IPX1-IPX9 Waterproof Test Description of IP Testing Equipment: IP Testing Equipment is short for ingress protection testing equipment. They consist of a series of devices used to assess the extent of protection of persons against access to hazardous parts inside the enclosure and protection of the equipment inside the enclosure against ingress of solid foreign objects and (or) against ingress of water. Hongce is an Ingress

Home Appliance Testing Equipment Vacuum Cleaners Cleaning Tests IEC 60312 Description of Home Appliance Testing Equipment: It is a special system for dry vacuum cleaner performance testing. The whole system is composed of dust removal and dust spread test platform, air performance test platform, dust beating platform, carpet hanging rack, frequency conversion power supply and central control cabinet. Standard of Home Appliance Testing Equipment: IEC 60312-1 Vacuum cleaners

IEC60112 Flammability Testing Equipment Determination of CTI And PTI Standard: IEC60112-2009 Method for the determination of the proof and the comparative tracking indices of solid insulating materials. It specifies the method of test for the determination of the proof and comparative tracking indices of solid insulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltages. Flammability Testing Equipment Proof tracking index

Two Chamber 30s/pc - Helium Leak Testing Equipment for Condenser and Evaporator 1.5*10-5 Mbar.L/s Product Introduction of Helium Leak Testing Equipment: Helium leak detection equipment is widely used because of its high sensitivity, various application methods, strong adaptability and non-destructive. Helium leak detection equipment is mainly used in atomic energy industry, Institute of high energy physics, power industry, aerospace, instrument manufacturing, air conditioning

300N Steel Compression Testing Apparatus IEC 60884-1 Figure 8 Product details: The apparatus for compression test of 24.5 is desgined and manufactured according to IEC 60884 fig 8, it is used to test the compression resistance of test specimens. It consists of steel pressure plate , steel base and 300 N weight, the operation method is by manual. Test principle: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of

Probe Anti-Electric Shock Experimental Device IEC Test Equipment IEC60990 High Precision Contact Current Tester Attribute Value Product name Touch Current Measuring Circuit Warranty 1 Year Standard IEC60990 RS 1500Ω RB 500Ω CS 0.22μF R1 10000Ω C1 0.022μF Product Introduction The CT-2 probe anti-electric shock test device is designed to ensure the safety of electrical equipment. This device strictly follows international standards and is a core tool for testing the anti

6-Station Temperature Rise Tester | Complies With IEC 60898-1 | Standard Test Voltage

3.2kw Free-air Oven (Heating Chamber) RT+20℃～200℃ IEC60884-1 Test Equipment HH0812 Standard with IEC Test Equipment: IEC 60884-1 2013 clause 16.1 Application with IEC Test Equipment: This device is use to perform thermal aging test to polymer materials (plastics, plastics and electrical insulating materials such as: wire and cable sheathing, heat shrinkable tube, rubber test or PVC materials, and the insulating components, or use for drying, baking, heat treatment and so on

IEC60884 Test Equipment Guide Rail Structure Single Workstation Conductor Damage Degree Test Device Standard with IEC Test Equipment: IEC60884-1 2013 clause 12.2.2, 12.3.10 and figure 11, IEC60669-1, UL486A-B Application with IEC Test Equipment: This device is use to check whether the terminals with screw and screwless terminals can bears the mechanism force under normal operation. Mainly use to judge whether the design and structure of screw clamping terminals meet the

IEC 62368 Steel Ball Impact Tester 50mm 500g for Luminaires Product Specifications Attribute Value Steel ball diameter 50mm Steel ball weight 500±10g Drop height 0.5-1.5m adjustable Clamping release Electronic control Standard IEC 62368-1, IEC 60598-1 Usage Drop impact test Test sample Luminaries, Audio Power 220V Product Description IEC 62368 Testing Equipment Steel Ball Impact Test for Enclosure With 50mm Steel Sphere Compliance Standards IEC 62368-1:2023 Audio/video,

IEC Testing Equipment Programmable Temperature And Humidity Chamber Climatic Test Product introduction for IEC Testing Equipment: This testing machine is mainly used for the adaptability test of electronic, electrical, food, automobile, rubber, plastic, metal and other products, parts and materials in high and low temperature alternating wet and hot environment storage, transportation and use. Purpose for IEC Testing Equipment: It is suitable for all kinds of electronic,

IEC 60228 Conductor resistance meter Product Introduction: CXT2510 Ultra low DC resistance tester is a high precision tester specially designed and developed for ultra low DC resistance test. The measuring range of this instrument is: 0.01uΩ~10MΩ; The display bits are five and a half; Automatic bidirectional current test, pulse test method to avoid the test loop heat affect the test accuracy, the test cable resistivity without a variety of current testing; Test speed up to 30

IEC 61869-2 Current Transformer Testing Equipment For Ratio Error And Phase Displacement Test Product application: The Current Transformer Testing Equipment is used for Measuring the ratio error and phase displacement of current transformers. Standard: IEC 61869-2 Instrument transformers - Part 2: Additional requirements for current transformers Current Transformer Testing Equipment configuration: Current transformer tester, the product is composed of transformer calibrator,

IEC60990 Figure 4 Touch Current Measuring Network Convenient Products Introduction: This test network conforms to the measuring network requirements of IEC60990 touch current and the measurement method of protective conductor current, (figure 4-mesuring network touch current weighted (sensory current or reaction current). This network is convenient to use and easy to operate, and the power supply switch is made separately, which can solve the shortcomings of power supply

IEC60320 Connectors Insertion And Extraction Force Tester Products Information with Customized Products: This test apparatus conforms to IEC60320. It is used to test connector insertion and extraction force. Matched with electronic pull tester, it can test instant value and maximum value. Technical parameters with Customized Products: Standard IEC60320 Test purpose Check connector insertion and extraction force Test speed 1 ㎜ / S ~ 6 ㎜ / S adjustable Test trip 180 ㎜ Force

4 Stations Hot Melt Ealing Water Filled Teether Machine Testing Equipment for Water Teether Product Introduction with Water Teether Testing Equipment: This water filled teether machine is full automatic, which adopts advanced flow control, automatic water filled, and automatic sealing and cutting, it is common use in the similar products of punching process. The system consists of an automatic water filled mechanism, an automatic sealing mechanism, an automatic cutting