IP Testing Equipment

The Programmable Immersion Waterproof Tester is a versatile and intelligent testing platform designed specifically for IPX7 and IPX8 enclosure protection validation against water ingress. This advanced system integrates a high-precision 0.25 degree pressure gauge, a wide 0 to 6 bar pneumatic pressure control module, and a fully programmable 0 to 99 minute timer into a single compact workstation. Engineered with a PLC-based control architecture and an intuitive color touch

IP Testing Equipment IEC 60529 IPX8 Water Immersion Test 500mm Diameter Product introduction: The HC-IPX8 waterproof test device, created by the source manufacturer HongCe, protects the waterproof reliability of each product with laboratory-level precision. Humanized design replaces cold mechanical operation, making rigorous testing a bridge for quality dialogue. Standard of IP Testing Equipment: IEC 60529:2021 - Enclosure protection level (IP code) Product core value: We

60529 Complete IP Testing Equipment from IPX1 To IPX8 Open Type Standard of IP Testing Equipment: IEC60529 degree of protection provided by enclosures (IP Code), clause 14.2.1, 14.2.2, 14.2.3, 14.2.4, 14.2.5, 14.2.6, 14.2.7, 14.2.8, and figure 3, figure 4, figure 5 and figure 6, IPX1, IPX2, IPX3, IPX4, IPX5 IPX6, IPX7 and IPX8, Table 3. Application of IP Testing Equipment: It is used to test the degrees of protection against ingress of water indicated by the second characteri

IPX3/IPX4 IP Testing Equipment with Waterproof Handheld Test Device for Splash and Spray Resistance Product brief introduction for IP Testing Equipment: This is a handheld test unit designed for testing IPX3/IPX4 water resistance levels. It simulates drenching and splashing environments to help you evaluate the water resistance of your equipment. This device is easy to operate and carry, making it ideal for laboratory and field testing. Conditions when using the spray nozzle

IP Testing Equipment Open-Type Spraying And Splashing Test for IPX3/ IPX4 Application of IP Testing Equipment: IPX3/IPX4 Water Spraying & Splashing Test Equipment is used to determine the protection of the enclosure against spraying water and splashing water. In addition to the chamber-type rain test device, Hongce also supplies IPX3/4 open-type spraying and splashing test equipment. Feature of IP Testing Equipment: The oscillating tube made of stainless steel is a semi

121 Number Of Holes Handheld Spray Nozzle Tester For 0 - 1.6 Bar Ip Testing Equipment Product Introduction with IP Testing Equipment: The IPX3/4 Spray Nozzle is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is conveniently positioned by the nozzle. The spray pattern of the nozzle is made

IEC60529 IP Testing Equipment Test Probe D for IP4X 1mm Probe Product Introduction for IP Testing Equipment: The 1.0mm test rod conforms to IEC61032 figure 4 named test probe D and IEC60529 for IP4 and suffix D codes. It is used to verify the protection of persons against access to hazardous parts, also used to verify the protection against access with a tool. The handle and stop face are made of nylon. The rod is made of stainless steel. This probe has a terminal clamp to

IP Testing Equipment IP Test Probe Kit Jointed Test Finger and Test Rod Application of IP Testing Equipment: IP Test Probe Kit is a set of tools used to determine the degrees of protection provided by product enclosure against access to hazardous parts and ingress of solid foreign objects. It consists of access probes and object probes, which are required to be pushed against or inserted through any openings of the enclosure with the specified forces during testing. The

IP Testing Equipment IEC60529 Handheld IPX5 or IPX6 Water Jet Nozzle Application of IPX5 or IPX6 Water Jet Nozzle: IPX5 or IPX6 call for a specimen to be sprayed with water from all practicable directions. IPX5 specifies a nozzle with a 6.3mm diameter opening and a flow of 12.5l/min. IPX6 specifies a nozzle with a 12.5mm diameter opening and a flow rate of 100L/min. Instrument; The IPX5-6 Jet Nozzle consists of a jet handle that is equipped with a pressure gauge and an easy

IPX1/IPX2 Drip Box IP Testing Equipment With Drip Height 200mm Standard of IP Testing Equipment: IEC 60529: 2013 Degrees of protection provided by enclosures (IP Code) Application: Test for second characteristic numeral 1 & 2 with drip box. For assessing the protection against vertically falling water drops. Feature of IP Testing Equipment: The test is made with a device which produces a uniform flow of water drops over the whole area of the enclosure. Box-type drip test

IPX3 IPX4 Oscillating Tube Tester HH0802 Ingress Protection with IP Testing Equipment Standard with IP Testing Equipment: IEC60529 degree of protection provided by enclosures (IP Code) of the IPX3 and IPX4, IEC 60884-1, IEC 60335-1, IEC 60598-1. Application with IP Testing Equipment: It is used for the testing of IPX3 and IPX4. Test sample with IP Testing Equipment: This IP testing equipment apparatus with water proof functions, such as electronic appliances, lamps,

Small Tools That Decide Whether an Enclosure Passes or Fails Long before a full waterproof or dust cabinet runs, test laboratories reach for probes to check contact safety and protection against access. This IP test probe kit brings together the jointed test finger, test rod and related probes used to verify enclosure openings against the relevant IP code requirements. Each probe is finished to the dimensions called out in IEC 61032, so measurements are dependable and

Overview For products that face steam, heat, and pressure wash in real life. Standard rain and jet tests cover a lot of ground, but they do not reproduce the combined heat, pressure, and steam found in vehicle underbody washing, industrial cleaning lines, and demanding outdoor installations. This IPX9K high temperature high pressure water spray test chamber addresses that gap. It is engineered for the high-pressure, high-temperature jet requirements associated with the IPX9 /

Dust Ingress Testing That Matches the Standard, Not Just the Weather Dust protection is often the rating that separates a product which survives a dusty jobsite from one that fails in the field. This IP5X/IP6X sand and dust test chamber was designed around the practical reality of testing large enclosures — from automotive control units to outdoor luminaires — while keeping the dust distribution uniform and repeatable. It is built to IEC 60529 clause 13 procedures, with the

One System, Every Waterproof Rating You Need to Prove When laboratories and certification teams plan for enclosure testing, the hardest part is rarely the test itself — it is the number of separate rigs traditionally required to cover IPX1 through IPX8. This integrated IPX1–IPX8 waterproof test system was developed by our engineering team after years of field feedback from test houses and manufacturers, and it brings vertical drip, oscillating tube, spray nozzle, hose jet and

IPX9K High Temperature High Pressure Water Spray Testing Chamber for IEC 60529 Compliance Testing Environmental Rain Testing Equipment for Electronic, Automotive and Lighting Products Product Brief Description The High Pressure Rain Spray & Oscillating Tube IP Testing Equipment is designed for manufacturers and testing laboratories that require reliable environmental protection testing for products exposed to rain, water spray and high-pressure washing conditions. Manufacture

The Pressure Water Tightness Tester is a high-performance immersion waterproof testing instrument engineered for precise IPX7 and IPX8 enclosure protection verification. Designed with a 0 to 6 bar pneumatic pressure system, this equipment delivers reliable and repeatable water tightness assessment for electronic housings, automotive components, lighting fixtures, and industrial enclosures. The integrated high-precision pressure gauge with 0.25 degree accuracy ensures that

IEC60529 Compliant IP5X IP6X Sand Dust Test Chamber | Industrial Dust Ingress Protection Testing Equipment For Lab Reliability Certification Product Introduction This sand dust testing device is professionally built per IEC60529 Figure 2 core clauses, simulating floating dry dust environments to complete IP5X dust-protected and IP6X dust-tight grade verification for enclosures. It adopts closed circulating dust suspension system, intelligent PLC touch screen control and

Automatic IPX1-IPX6 Waterproof Spray Test Chamber for IEC 60529 Rain, Splash & Water Jet Testing Product Brief Introduction The Automatic IPX1~IPX6 Comprehensive Waterproof Spray Test Chamber developed by HongCe is a high-precision waterproof testing solution designed for evaluating the ingress protection performance of electrical and electronic products under simulated rain, dripping water, splash water, and powerful water jet environments. This integrated testing system

IP Testing Equipment Plug Pin Retention Strength Tester for IEC 60884 / IEC 60529 Compliance Electrical Safety Testing Engineered for precision and reliability, this Plug Pin Retention Strength Tester is designed to evaluate the mechanical firmness of plug pins under standardized conditions. Built for laboratories and manufacturers who demand compliance, consistency, and confidence, it ensures your products meet international safety standards without compromise. Product