Footwear Testing Equipment

EN344 , SATRA TM161 Standad 90 Degree Angle Bending Footwear Testing Equipment For Shoe Sole Flexing Resistance Test 1.Quick Details: Alternative name Shoe Sole Bending Testing Machine Function Test bending resistance of shoe outsole Type Sole flexing durability tester Weight 98kg Volume 100*53*30CM Corresponding test standard EN344, SATRA TM161, ISO17707,GB/T20991 2.Description: Shoes Sole Bending Tester is used to test the flexing resistance of shoe soles under continuous

Portable Safety Shoes Anti-Static Tester SATRA TM93 Standard , Electrical Resistance 1. Quick Details: Alternative name Safety Shoes Anti-Static Tester Function Test anti-static performance of safety shoes Type Electric drive; DC motor Weight 15kg Volume 285mm*95mm*410mm Corresponding test standard SATRA TM93 2. Description: Anti-static Safety Tester is used for testing the electrical resistance of the shoe or its materials so as to assess its anti-static characteristics. 3.

The Top Testing Machine Of The Tester for Leather Shrinkage Temperature Determination 1. Quick Details: Alternative name Leather shrinkage temperature tester Function Test and confirm temperature of leather when it occurs shrinking in the hot water Weight 50kg Volume 50×30×80cm (W*D*H) Corresponding standard ISO 3380-2002,QB/T 2713-2005,QB/T 3812.8-1999 2. Description: The instruments is mainly used to measure the water temperature at the time of occurrence of shrinkage for a

Electrical Automated Shoes Stiffness and Impact Resistance Testing Machine Description Shoes Stiffness Tester is used to test resistance bending to France shoe shoe 39 yards, 42 yards and British shoe NO.6, NO.8. Using fixture to clamp the front of shoe (locating at 1/3 of half sole of shoe, located to shaft location ), after motor launching, driving to pulley, to make shaft drive the turning board at 100mm/min to impose the strength of 30N to shoes in order to do test. The

Fatigue Testing Machine 1. Product Name:fatigue testing machine 2. Product Model:GX-2042 3. Standard:DIN-3415,SATRA PM123 4. Principle:The tester would repeatedly do the peeling and gluing tests for a set time. Then cut the sample into 75x20mm standard piece and glue the sample evenly by the load. Finally, use the tensile testing machine to test its adhesive force and adhesive strength. 5. Technical Parameter: Diameter of the roller Upper roller:162.5mm,lower roller:160mm

MarkII Skid Resistance Footwear Testing Equipment with ASTM-F1677 / Portable Type Description The testing machine is used for the skid resistance test .It is very convenient as it can be used on various kinds of floor whatever dirty or wet. Main features Elegant and nice structure design Easy to operate Test peeling strength between the sole and upper of a shoe Specifications Model GX-5046 Pressure 10LB Slider diameter 12mm Sample 3″×3″(76.2×76.2mm) Floor area 4″×4″ or above

Footwear Testing Equipment For Safety Shoes Withstanding Voltage Test Quick Details Alternative name Safety shoes voltage resistance tester Function Test voltage resistance of shoes sole Type Table type Weight 72kg Volume 115*55*85cm Corresponding test standard CNS6863, CSA, ANSI, EN344, QAS,BS-953, 1870 ISO 8782 Description The tester is used for detecting withstanding voltage value for shoe sole or insulated shoe materials. Impose voltage on the shoe sole, the voltage rises

Tester for Leather Shrinkage Temperature Determination 1. Quick Details: Alternative name Leather shrinkage temperature tester Function Test and confirm temperature of leather when it occurs shrinking in the hot water Weight 50kg Volume 50×30×80cm (W*D*H) Corresponding standard ISO 3380-2002,QB/T 2713-2005,QB/T 3812.8-1999 2. Description: The instruments is mainly used to measure the water temperature at the time of occurrence of shrinkage for a variety of leather and fur in

Four Station SATRA TM92 Shoe Flexing Resistance Testing Machine 1. Quick Details: Alternative name flexing shoe tester Function The tester is specialized for testing sports shoes, leisure shoes Principle and method Fix the front of shoe, lift the heel to do successive flexing action Weight 236kg Volume 97×77×70cm Corresponding test standard SATRA TM92 2. Description: This tester is specialized in testing flexing durability of sports shoes, leisure shoes, and work shoes. The

ISO 20344 Shoe and Gloves Cut Resistance Testing Machine Description The tester is used for testing cutting resistance of shoe uppers and gloves. But, it is not available for safety glove made by hard materials. A driving rotation round blade under a specified load cuts the glove held by the fixture of tester to and fro. After test, compare it with its original statuses to get the results. Specifications Model GX-5093 Stroke 50 mm Load 5+/-0.05 N Max. Cutting Speed 10 cm/s

Industry Insulated Shoes High Voltage Withstanding Resistance Testing Machine Description The tester is used for detecting withstanding voltage value for shoe sole or insulated shoe materials. Impose voltage on the shoe sole, the voltage rises slowly till to the set value, then check whether the shoes can bear the voltage at certain time. Specifications capacity 0.5KVA Test voltage 1 kv/sec to specific voltage input voltage AC220V output voltage AC0~20KV or custom made test

Footwear Tester for Rubber Frosting Test and Shoes Materials Anti-hydrolysis Ability Test 1. Product Name:Frosting and Hydrolysis Tester 2. Product Model:GX-5047 3. Product Description:The testing machine is mainly used for the rubber frosting test and shoes materials anti-hydrolysis ability test. By simulating various kinds of climate environment, the machine can test the adaptability changes of the product. It can be widely used in tests of electronics, electrical

Flexing Resistance ROSS Rubber Testing Equipment For Shoe Sole , ASTM Standard 1. Quick Details Alternative name Ross Flexing Resistance Tester Function Test flexing resistance of rubber sole Type ROSS Feature Only designed for rubber shoe sole; 90°flexing and folding action Weight 56kg Volume 610*500*550mm Corresponding test standard BS903, GB/T1689, CVS734, CNS734, K6264 2. Description The ROSS shoe sole flexing resistance testing equipment is applied for testing flexing

Flexing Resistance ROSS Rubber Testing Equipment For Shoe Sole , ASTM Standard 1. Quick Details Alternative name Ross Flexing Resistance Tester Function Test flexing resistance of rubber sole Type ROSS Feature Only designed for rubber shoe sole; 90°flexing and folding action Weight 56kg Volume 610*500*550mm Corresponding test standard BS903, GB/T1689, CVS734, CNS734, K6264 2. Description The ROSS shoe sole flexing resistance testing equipment is applied for testing flexing

Footwear Testing Machine Bending Angle Footwear Testing Equipment Outsole Bending Resistance Tester GAOXIN Footwear bending test machine is mainly use for test the outsole of shoes bending or flexing resistance property at the Room temperature and low temperature below zero degree centigrade condition, the temperature of test chamber can be dropped to minus 50 degree celsius. we already installed the bending grips or fixtures in the test chamber. If you want to do the other

LCD Display Shoes Bending Water Proof Testing Equipment, Flex Angle of 0-60 1. Quick Details Alternative name shoes bending water-proof tester Function The tester is applied to test water-proof of finished shoes, shoe sole Principle and method Fix the heel parts of shoes, lift front parts and do successive bending Weight 300kg Volume (W×D×H) 110×93×127 cm Corresponding test standard GB/T20661-2007 5.15 2. Description This machine is designed for measuring the waterproofness

Testing Equipment Of Easy Operation Impact Durability Shoes Heel Impact Tester , BS - 5131 , SATRA TM20 Standard 1. Quick Details: Alternative name Woman's Shoes Heel Impact Tester Function The tester is applied to test impact durability of woman's shoe Principle and method Fix the heel parts of shoes Weight 101kg Volume (W×D×H) 110×93×127 cm Corresponding test standard BS-5131,SATRA TM20 2. Description: Woman's shoes Heel impact tester simulate female wearing high heels on

The Top Seller Testing Machine Electric LD32 / EN Shoe Material Heat Resistance Footwear Tester AC220V 1.Quick Details: Alternative name Shoe Material Heat Resistance Tester Function Test heat resistance of shoe sole Type Electric drive; DC motor Weight About 149kg Volume 1000×370×320 mm Corresponding test standard SATRA TM49, EN344, LD32, GB/T20991 2. Description: The tester is used to detecting heat resistance of shoe sole. withstand the heat due to shoemaking operation

Electric Friction Discoloration Tester For Rubbing Discoloration Test Of Dyed Fabric Leather testing Equipment 1.Product Name:Electric Friction Discoloration Tester 2.Product Model:GX-5029-A 3.Product Description:The testing machine is mainly suitable for the rubbing discoloration test of dyed fabric and leather. The testing method is using the rubbing awl wrapped by dry or wet white cotton to rub the sample clamped in the testing platform to evaluate its dye fastness

Top Selling Safety Footwear Testing Equipment With Electromagnet Control , EN Standard 1.Product Name:Safety footwear impact testing machine 2.Product Model:GX-5032 3.Product Description:The tester is mainly used for the impact resistance test of the safety shoes toe head. Use the electromagnet to control the drop of hammer and drop from the set height. Check the damage or deformation of steel toe head of the shoes to evaluate its resistance to impact. 4.Test Standard:EN-344