Seamless Steel Tube

DUPLEX 2507 STAINLESS STEEL PIPE SUPER DUPLEX 2507 STAINLESS STEEL PIPE is a ferritic-austenitic (biphasic) stainless steel that combines the most beneficial properties of many ferritic and austenitic steels because of their high levels of chromium and molybdenum The ability to resist pitting corrosion, crevice corrosion and uniform corrosion.The biphasic microstructure ensures that the steel has a high resistance to stress corrosion cracking, and the mechanical strength is

SA UNS S32750 duplex stainless steel tube SA UNS S32750 duplex stainless steel tube is applied in high tension and high corrosion environments. It can stand high wear and tear more than other types of steels. SA 240 UNS S32750 Strips & A240 gr S32750 Sheet are used in applications such as automobile and construction industries to provide minimal size and weight at the same time with high tensile strength. Duplex UNS S32750 Coil has very low corrosion ratios under very high

A789 UNS s31803 duplex stainless steel pipe A789 UNS s31803 duplex stainless steel pipe is progressively sturdy with twice as much quality and preferable execution file over an ordinary customary treated steel. Duplex S32205 Seamless Pipe otherwise called Duplex 2205 Stainless Steel Pipe is a two-stage, ferritic and austenitic steel with 22% chromium (22cr Duplex) 3% molybdenum, 5 to 6% nickel alloyed hardened steel otherwise called x2crnimon22-5-3 utilized broadly in

Duplex S31803 Seamless Pipe The ASTM A789 UNS S31803 tubing refers to seamless and welded tubing manufactured in accordance with ASTM A789/ASTM A1789M, which contains approximately 50% ferrite and 50% austenite. The stress corrosion resistance of ASTM A789 in neutral chloride solution and H2S is better than that of 304L, 316L austenitic stainless steel, and 18-5mo type duplex stainless steel. The UNS S31803 tubing is especially suitable for the temperature range of -50°F/+600

DUPLEX 2205 STAINLESS STEEL PIPE 2205 is a duplex (austenitic-ferritic) stainless steel containing about 40 – 50% ferrite in the annealed condition. 2205 has been a practical solution to chloride stress corrosion cracking problems experienced with 304/304L or 316/316L stainless. The high chromium, molybdenum and nitrogen contents provide corrosion resistance superior to 316/316L and 317L stainless in most environments. The design strength of 2205 is significantly higher than

ASTM A240 UNS S32760 Steel Pipe ASTM A240 UNS S32760 Plate is a super duplex grade stainless steel alloy made for specific applications. Super duplex is a grading of duplex steel which is a combination of ferrite and austenitic steel types. By combining the structures of ferrite and austenite steels, a remarkable corrosion resistance along with high tensile strength is achieved. SA 240 UNS S32760 Sheet is used in ships, tanks and containers to deploy in most of the surfaces

ASTM A790 UNS S32750 Welded Pipe ASTM A790 UNS S32750 is a variation of super duplex steel. The duplex steel material is made up of chromium and molybdenum alloy. The duplex has the ferritic and austenitic steel properties in its metallurgic microstructure. This gives the name duplex to the material. The SA 790 UNS S32750 belongs to the super duplex category. There are three groups of duplex, namely the duplex, super duplex and lean duplex. Each of them has their own

ASTM A789 Duplex steel S31803 tube ASTM A789 /A789M Covers Grades of nominal wall thickness, stainless steel tubing for services requiring general corrosion resistance, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures. Chemical Composition UNS Designation Composition, % C Max Mn max P max S max Si max Ni Cr Mo N Cu Others S31803 0.03 2 0.03 0.02 1 4.5-6.5

DUPLEX 2507 STAINLESS STEEL Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment. The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity, and a low coefficient of thermal expansion. The high chromium, molybdenum, and

DUPLEX 2205 STAINLESS STEEL PIPE Duplex 2205 stainless steel pipe combination of ferrite and austenite is the most beneficial properties, has the very good resistance to chloride stress corrosion cracking, is made up of 21% chromium, 2.5% nitrogen and 4.5% molybdenum nickel alloy consisting of duplex stainless steel, it is the yield strength of austenitic stainless steel double, this feature enables designers when designing products lose weight, make this kind of alloy has

Hot Formed Steel Pipe Q345 Round Square Rectangle Seamless Steel Tube Material: Q345 A/B/C/D/E Technology: Seamless hot formed Size Range: O.D.: 5 - 420 mm W.T.: 0.5 - 50 mm Length: Max 12000 mm Q345 is a low-alloy steel, widely used in bridges, vehicles, ships, buildings, pressure vessels, special equipment, etc. "Q" means yield strength, and 345 means that the yield strength of this steel is 345MPa. Steel Grade and Chemical Compositon,% Steel Grade C Si Mn P S Al Nb V Ti Cr

ASTM A210 Seamless Carbon Steam Boiler Tubes for Boiler and Superheater Applications: For Boilers,Superheaters,Steam linepipes of boilers Technique: Cold-drawn Steel Grade/Steel Material: A-1, C Size range: O.D. 6-168mm W.T. 1-15mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: Steel Grade and Chemical Compositions: Grade C Mn P S Si A-1 ≤0.27 ≤0.93 ≤0

ASTM A335 Seamless Ferritic Alloy-steel Boiler Pipe Applications: For Boilers,Superheaters,Steam linepipes of boilers Technique: Cold-drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: P5 P9 P11 P12 P21 P22 P91 P92 Size range: O.D. 6-420mm W.T. 1-50mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: Steel Grade and

GOST 3262 - 75 Hot Rolled Seamless Carbon Steel Pipe For Water Supply Product Description Standard: GOST 3262-75 Steel Grade: 08kp, 08ps, 10, 15, 15kp, 15ps, 20, 20kp, 20ps, St1sp, St1ps, St2sp, St2ps, St3kp, St3ps, St3sp, etc. Size Range: Outside Diameter: 17 - 114 mm Wall Thickness: light: 2 – 4 mm; medium: 2,2 – 4,5; heavy: 4,5 – 5 mm. The pipes are delivered without zinc-coating, thread and couplings, of normal precision. Sizes Nominal Diameter, mm Outside Diameter,mm

GB/T 9808-2008 Seamless Steel Pipe for Geological Drill and Mining Tubing Product Description: This standard specifies the drilling seamless code, ordering content, dimensions, Weight, , technical requirements, test methods, marking and quality certification, packaging, appearance inspection rules. This standard applies to the geological core drilling, well drilling, hydrogeological drilling, engineering drilling casing material, core tube materials and materials with

ERW Square Pipe Seamless Rectangle Steel Tube Standard: ASTM 500 Material: Q195/Q235/Q345/16Mn/ASTM A53/ST37/ST52 Appilications: for construction of bridges, and buildings, and for general structural purposes Size range: Square tubes: O.D.: 5 - 420mm W.T.: 0.5 - 50mm L: Max 12000mm Rectangle tubes: O.D.: 20 - 30 to 400-600 W.T.: 1 - 24 mm L: Max 12000mm ASTM A500 Steel Grade and Chemical Compositions: Element Grade A, B and D Grade C Heat Analysis Product Analysis Heat

Automotive Using Tube EN10305-1 E215/235/355 Seamless Cold Drawn Tubes Standard: EN10305-1/DIN2391 Material: E215, E235, E355, etc. Technology: Seamless cold drawn Size Range: O.D.: 16 - 168 mm W.T.: 1 - 23 mm Length: Max 12000 mm Application: for Auto Industry, machinery use, oil cylinder tube, motorcycle shock reducer steel tubes, Auto shock reducer inner cyclinder, etc. Chemical Compositon,% Steel Grade C Si Mn P S Al Steel name Steel number max max max max max max E215 1

Seamless Precision Tube ASTM A269 304 316 Welded Stainless Steel Pipes Product Description Product Name Seamless Precision Tube ASTM A269 304 316 Welded Stainless Steel Pipes Standard ASTM A269, EN10217-7 Grade SUS316L,316,321,310,310S,304,304L,302,301,202,201 Technical Seamless and Welded O.D. 0.5 - 10 mm W.T. 0.08 - 2 mm Application: 1).Heat exahanger tube for petrochemical,chemical and ocean development 2).Industrial furnace and heater tubes 3).for gas turbine and

Boiler Tubing Superheater Pipe ASME SA210 Seamless Medium Carbon Steel Tubes Product Description This specification covers minimum-wall-thickness, seamless medium-carbon steel, boiler tubes and boiler flues, including e ends (This type is not suitable for e ending by forge welding), arch and stay tubes, and superheater tubes. Standard ASTM A210/ ASME SA210 O.D. 12.7 - 127 mm W.T. 1 - 15 mm Length Max 12000 mm Application Boiler, superheater and etc. Surface Finish Oiled

Boiler Tube ASTM A192 Seamless Carbon Steel Tubes For High-Pressure Service Tubes Applications: for Boilers,Superheaters, Heat-Exchangers, High-pressure Boilers, Steam Boilers Cold Condensers and High-Pressure Services, High-Temperature Services for Boiler Constructions Size Range O.D. 12.7 - 177.8 mm W.T. 1 - 25.4 mm Length As per client requested Steel Grade and Chemical Compositions: C 0.06-0.18 Mn 0.27-0.63 P ≤0.035 S ≤0.035 Si ≤0.25 Product Show Company Information FAQ Q