Welded Steel Tube

ASTM A523 Electric Resistance Welded High Pressure Cable Circuits Steel Pipes Introduction: Product name High Pressure Cable Circuits Steel Pipes Stadard ASTM A523 Technique ERW, seamless OD 5-420mm WT 5.56-14.27mm Application Cable, circuits Section shape Round Coating Yes Surface treatment Oiled Port Shanghai,Ningbo Terms of Delivery FOB,CIF,CFR Terms of Payment T/T Grade Type C max Mn max P max S max Grade A Heat Product Heat Product Heat Product Heat Product Seamless 0.22

JIS G3314 SA1D 4 Inch Welded Aluminized Steel Tubes ASTM A513 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing Size : O.D.:6-350mm W.T.:1-12.5mm L:max12000mm Grade: 1008,1010, 1020, 1026 Production: ERW + DOM Steel Grade and Chemical Compositions: Steel Grade C Mn P S Si Cr Mo max max max max min 1008 0.10 0.5 0.035 0.035 1010 0.08-0.13 0.30-0.60 0.035 0.035 1018 0.14-0.20 0.30-0.60 0.035 0.035 1020 0.17-0.23 0.30-0.60 0.035 0.035 1026 0.22-0.28 0.60-0.90 0

JIS G3314 SA1D Welded Aluminized Steel Tubes ASTM A513 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing Size : O.D.:6-350mm W.T.:1-12.5mm L:max12000mm Grade: 1008,1010, 1020, 1026 Production: ERW + DOM Steel Grade and Chemical Compositions: Steel Grade C Mn P S Si Cr Mo max max max max min 1008 0.10 0.5 0.035 0.035 1010 0.08-0.13 0.30-0.60 0.035 0.035 1018 0.14-0.20 0.30-0.60 0.035 0.035 1020 0.17-0.23 0.30-0.60 0.035 0.035 1026 0.22-0.28 0.60-0.90 0.035 0

TORICH Aluminized Weded Car Muffler Exhaust System Pipe Aluminum Coated Steel Pipes mainly used for Automotive application like as Muffler tube of Exhaust Systems, Cylinder tube of Shock absorber and Steering parts ect. 1. Chemical Properties: Meterial Chemical Composition(%) Mechanical Properties C Si Mn P S T.S E.L Hardness max. max. max. max. max. N/mm2 % HRB Aluminized Steel SA1C 0.06 0.02 0.4 0.04 0.04 275 35 55 SA1D 0.06 0.02 0.4 0.04 0.04 275 32 50 SA1E 0.06 0.02 0.4 0

ASTM A787 Welded 0.71T Carbon Steel Mechanical Tubing Muffler Pipe Standard Specification of ASTM A787 Tubing Specification covers round, square, rectangular, and special shape, electric-resistance-welded mechanical tubing, either zinc-coated (galvanized) after welding or produced from aluminum-coated, zinc-coated (galvanized), zinc-iron alloy-coated (galvannealed), 55 % aluminum-zinc alloy-coated, or zinc-aluminum-magnesium alloy-coated steel sheet. Tubing for use as

Seamless Welded Cold Drawn Steel Tubes Gas Spring Dampers Tubes Products Description Quick Detail: Product name Seamless Welded Cold Drawn Steel Tubes Gas Spring Dampers Tubes Steel Grade E155, E195, E235, E275, E355 Size Range OD range:15-200mm WT range: 0.8-16mm Tolerance OD: (+/-0.06mm) WT: (+/-0.03mm) ID surface 0.4μm Straightness ≤0.5mm/1m Roundness ≤0.5mm Regular specifications 23.2X1.6, 42X3, 25.4X0.9, 15x1, 19x1.5, 20x1, 20x1.5 Delivery Condition +C, +LC, +SC, +A, +N

SAE J526 Carbon Welded Steel Tube Mechanical Coil Tubing for Auto Spec: Material:C Si Mn P S Size Range:OD:3.18-18mm WT:0.5-1.2mm General Length:1-200m Tolerance: According to the following tables or customers’ request. Table 1 Outer diameter, wall thickness and theoretical weight OD/mm WT/mm 0.30 0.40 0.50 0.60 0.65 0.70 0.80 0.90 1.00 1.30 theoretical weight /(kg/m) 3.18 0.0213 0.0274 0.0330 4.00 0.0274 0.0355 0.0432 0.0503 4.76 0.0330 0.0430 0.0525 0.0616 0.0659 0.0701 5

Welded Steel Tube 19.1mmX1.2mm HC340 HC420 Alloy Steel Tube for Automobile Parts from TORICH Product details High Strength Low Alloy Steel Material: HC340/HC340LA, HC420/HC420LC etc Size OD: 10mm~50mm WT: 0.5mm~2.5mm Length: according to customer requirement Technique: Cold Draw/Cold Rolled, ERW Tolerance: It can be controled within OD/Thickness +/-0.1mm Application: For Automobile Parts Test: Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic

ASTM A524 DWST Double Wall Welded Steel Tube Low Carbon steel for automotive Copper brazed double wall steel tube is made of steel strips which is copper plated on both sides.It has widely applied for automobiles,refrigerators and the other hydraulic system industries. Dimension and specification O.D. mm Thickness mm Weight g/m Assurance pressure kg/cm3 4.76 0.7 70.28 350 6.00 0.7 91.76 350 6.35 0.7 97.75 350 7.00 0.7 108.75 350 7.14 0.7 111.17 350 8.00 0.7 126.31 350

Products Description TORICH ASTM A523 Plain End Seamless and ERW Steel Pipe for High-Pressure Product Name Plain End Seamless and ERW Steel Pipe for High-Pressure Standard ASTM A523, A370, A751, E59, ANSI B36.10 Techinique Electric Resisitance Welded Type Seamless and Welded Test Flattening Test, Hydrostatic Test Coatings The pipe shall not be given a mill coating of paint, oil, or any other material either inside or outside Application High Pressure pipe-type electric cables

ASTM A513 Automotive Steel Tubes , Carbon and Alloy Steel Mechanical Tubing,4130 steel tSize range O.D.:6-350mm W.T.:1-12.5mm L:max12000mm Grade 1010, 1020, 1026,4130 Production ERW + DOM Packing In Hexagonal Bundles, with anti corrosion oil protection, with seaworthy packing Deliver condition 1. A.W.H.R. "as welded" from hot-rolled steel 2. A.W.C.R. "as welded" from cold-rolled steel 3. S.D.C.R. "sink-drawn", cold-rolled steel 4. M.D. mandrel drawn 5. S.S.I.D. spec

GB/T 13793 Longitudinal Electric Resistance Welde Longitudinal Electric Resistance Welded Hot Dip Galvanized Steel Tubes Application:Suitable for mechanical, construction and other structural purposes, and the straight seam welded steel pipe with an outer diameter of not more than 711mm, can also be applied to general welded steel pipe for fluid transportation size:L--4~12m OD--5~711mm WT--0.5~5.5mm Grade:10,20,Q195,Q215,Q213,Q275 Manufacture method:The steel pipe shall be

GB/T3091 ERW Welded Steel Pipes For Low Pressure Liquid Delivery Weled steel pipes for low pressure liquid delivery is also called general welded pipe, commonly known as the clarinet. It is used to transport oil, gas, air, water and heating steam and other general low pressure fluid and other purposes of welded steel pipe.Steel tube is divided into ordinary steel pipe and increasing pipe according towall thickness ;According to side form,it is divided into steel pipe (light

EN 10208 Standard Steel Pipe for Construction The pipe follow the EN10208 standard are the seamless or welded steel pipe for the on land transport of combustible fluids primarily in gas supply systems but excluding pipeline applications in the petrolrum and nature gas industries. Torich Interational Co.,Ltd is a professional manufacturer and exporter of steel pipes materials. It is an international marketing and sales company specialized in steel tubes, which holds the

AISI 321 HFW Stainless Steel Welded Tube for High-Temperature Fluid Transport AISI 321 HFW stainless steel welded tube is a titanium-stabilized austenitic stainless steel tube developed for transporting high-temperature gases, steam, condensate, thermal fluids, and corrosive process media. The titanium addition stabilizes carbon and reduces chromium-carbide precipitation after welding or prolonged exposure to approximately 425-815°C, improving resistance to intergranular

SAE J525 ERW / DOM Welded Steel Tube Low Carbon Annealed For Automotive Industry SAE J525 ERW/DOM Welded Low-Carbon Annealed Steel Tube for Automotive Hydraulic Lines SAE J525 ERW/DOM welded steel tube is a normalized, cold-drawn, single-wall low-carbon steel pressure tube designed for automotive fluid-line parts requiring bending, flaring, forming, and brazing. It is a practical choice when the drawing requires tight OD/ID control, good concentricity, a smooth surface, and

Product Description API 5CT Hot Dipped GI Mild Steel Pipe Galvanized Tube for Construction Outer Diameter : 48.3mm (DN40) Wall Thickness : 1.5-4mm Length : 3-6M according to client requirement Standard : EN39, BS1139 Material : Gr.A, Gr.B, Gr.C, S235, S275, S355, A36, SS400, Q195, Q235, Q345 Finish of pipe : Hot dipped galvanized with zinc 220~260g/m2; Pre-Galvanized with zinc 30-150g/m2 Painted with black/varnish lacquer; Oil on the surface to prevent rust; Bare pipe without

EN10305-2 Welded Steel Tubes with Precision Cold Drawn Steel Tubes for Mechanical / Automotive Application EN10305-2 Welded Precision Cold Drawn Steel Tubes Applications: for Auto industry/for Machinery use/Oil Cylinder Tube/Motorcyle Shock Absorber, inner cylinder/Telescopic Cylinders Quick Detail: Size Range: O.D.:6-350mm W.T.:1-35mm L:max12000mm Steel Grade: E195, E237, E275, E355, Description: ERW+ DOM The tubes are manufactured from electric welded pre-tubes by cold

JIS G3314 SA1D 5 Inch Welded Steel Tubes Aluminized JIS G3314 SA1D 5 inch welded aluminized steel tubes are manufactured from hot-dip aluminum-coated steel strip and formed by ERW/HFW welding for automotive exhaust and heat-shielding tube applications. The 5 inch size equals 127.0 mm outside diameter, and the aluminum-silicon coated surface provides better oxidation resistance and heat reflection than ordinary uncoated carbon steel. In practice, the product is usually

BS 1387 Q195 GI SS400 Welded Steel Tube Round Shape Galvanised Steel Tube BS 1387 Q195 / SS400 Welded Round Galvanized Steel Tube BS 1387 welded galvanized steel tube is a circular carbon-steel tube intended for threaded, welded, and general structural service. It is commonly supplied with plain, threaded, or threaded-and-socketed ends and with either a zinc-coated or black surface. For technically accurate procurement, the tube specification and raw-material grade must be