Alloy Steel Pipe

Alloy Steel Tube Grade GB/T3077 38CrMoAl ISO 41CrAlMo74 Structural steel tubes standard GB/T3077: 38CrMoAl ISO: 41CrAlMo74 GOST: 38X2MOA(38XMOA) DIN: 41CrAlMo7 34CrAlMo5 BS: 905M39 905M31 NF: 40CAD6.12 30CAD6.12 Chemical composition: C :0.35~0.42 Si:0.20~0.45 Mn:0.30~0.60 S :≤0.035 P :≤0.035 Cr:1.35~1.65 Ni:≤0.030 Cu:≤0.030 Mo:0.15~0.25 Tensile strength: σb (MPa):≥980(100) Yield strength:σs (MPa):≥835(85) Elongation:δ5 (%):≥14 ψ (%):≥50 Impact: Akv (J):≥71 αkv (J/cm2):≥88(9)

Alloy steel 10CrMo910 11CrMo910 12CrMo910 DIN17175 EN10216-2 10CrMo9-10 11CrMo9-10 12CrMo-910 For Application of Boilers, Heat Exchangers, Steam Boilers, Pressure Vessels Alloy Steel 10CrMo910 12CrMo910 DIN17175 EN10216-2 standard 10CrMo910: C: 0.08-0.15 Si: 0.50 Mn: 0.40-0.70 P: 0.025 S: 0.020 Cr: 2.0-2.5 Mo: 0.9-1.2 11CrMo910: C: 0.08-0.15 Si: 0.15-0.40 Mn: 0.30-0.70 P: 0.025 S: 0.025 Cr: 2.0-2.5 Mo: 0.9-1.2 12CrMo910: C: 0.10-0.15 Si: 0.30 Mn: 0.30-0.80 P: 0.015 S: 0.015

Alloy steel 4130 4140 for ASTM A519 seamless steel tubes ASTM A519 SEAMLESS STEEL TUBES, by DOM production, with the steel grade of SAE4140 and SAE4130, other alloy steel grade upon customer's agreement.: SAE4130: C: 0.28-0.33% Mn: 0.40-0.60% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% SAE4140: C: 0.38-0.43% Mn: 0.75-1.00% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% Sizing Method: 1. HF- hot finished 2.CW-cold worked Themal

Alloy steel T11 T22 with SA213 boiler steel tubes standard Alloy steel tube T11 T22 with SA213 boiler steel tubes standard T11: C: 0.05-0.15 Si: 0.50-1.0 Mn: 0.30-0.60 P: 0.025 S: 0.025 Cr: 1.0-1.5 Mo: 0.44-0.65 T22: C: 0.05-0.15 Si: 0.50 Mn: 0.30-0.60 P: 0.025 S: 0.025 Cr: 1.9-2.6 Mo: 0.87-1.13

Alloy Steel Grade T5 T9 T11 T12 T22 Alloy Steel Pipe Heat-Exchanger Tubes SA213 Steel Grade C Mn P S Si Cr Mo max max max max max min T5 0.15 0.30-0.60 0.025 0.025 0.5 4.0-6.0 0.45-0.65 T9 0.15 0.30-0.60 0.025 0.025 0.25-1.00 8.0-10.0 0.90-1.10 T11 0.05-0.15 0.30-0.60 0.025 0.025 0.50-1.00 1.0-1.50 0.44-0.65 T12 0.05-0.15 0.30-0.61 0.025 0.025 0.50 0.80-1.25 0.44-0.65 T21 0.05-0.15 0.30-0.60 0.025 0.025 0.50-1.00 2.65-3.35 0.80-1.06 T22 0.05-0.15 0.30-0.60 0.025 0.025 0.50 1

Alloy Steel Grade 35CrMo 40CrMo 42CrMo 42CrMo4 35CrMo, 40CrMo,42CrMo,42CrMo4, 10CrMo910,12CrMo910,34CrMo4 precision steel pipes with Alloy steel grade of 34CrMo,35CrMo,42CrMo,42CrMo4

TU 14-3-460-2003 20-PV Low Carbon Alloy Steel for High Pressure Boiler and Pipelines Material Specification TU 14-3-460-2003 20-PV is a low carbon alloy steel developed specifically for high-pressure boiler systems and pipeline applications. Known for its durability and resistance to high-temperature environments, this material is a preferred choice in heavy-duty industrial settings. The specification underlines the importance of both chemical composition and mechanical

4340 Chromoly Alloy Steel Seameless Round Tube for High Temperature Service AISI 4340 seamless chromoly tubing is a medium-carbon, low-alloy steel tube engineered for elevated-temperature applications, offering exceptional strength, toughness, fatigue resistance, and wear properties. It is manufactured by cold drawing or hot pilgering processes to tight tolerances, yielding a smooth surface finish and uniform mechanical properties. Typical dimensions range from 10 mm to 200

Hastelloy C276 Tube Chromium Nickel Alloy Steel Seamless Tube For Chemical Processing Hastelloy C-276 Tube is a seamless nickel-molybdenum-chromium alloy tube (UNS N10276 / DIN 2.4819) engineered for extreme corrosion resistance in both oxidizing and reducing environments. It is widely used in chemical processing plants, petrochemical production, pollution-control equipment, pulp and paper applications, and any environment where strong acids, chlorides, or mixed corrosive

ASME SA213 T2 T5 T11 T12 T22 Alloy Steel Seamless Tubes For Boilers And Heat Exchangers Seamless alloy steel tubes play a crucial role in the construction and efficiency of boilers and heat exchangers. The ASME SA213 standard covers these tubes, specifying the requirements for several specific grades such as T2, T5, T11, T12, and T22. This article provides a comprehensive overview of these materials, including specifications, key features, chemical composition, mechanical

15CDV6 1.7734 High Strength Steel Tube Low Alloy Steel Pipe For Racing Frame Material 15CDV6 is a high-strength low-alloy steel with excellent mechanical properties and toughness. It can achieve the best balance in strength, fatigue resistance and weight, so it is very suitable for making racing structural steel pipes such as racing roll cages and frames. Specification Steel Grade: 15CDV6 / 1.7734 Standard: EN 10083-3 low alloy carburizing steel Dimensions: We can customize

EN 10224 L235 L275 L355A Non-Alloy Steel Tubes ERW Galvanized Alloy Steel Pipe for Liquid Transport Introduction EN 10224 is a European standard that specifies the requirements for non-alloy steel tubes, particularly for use in liquid transport. These tubes are produced using the Electric Resistance Welding (ERW) method and are often galvanized to enhance their corrosion resistance. This article will delve into the material specifications, key features, chemical composition,

Alloy Steel Pipe Hastelloy B-2 Welded steel pipe corrosion-resistant, nickel-molybdenum alloy Hastelloy B-2 is a corrosion-resistant, nickel-molybdenum alloy solid solution state. Hastelloy B-2 It has the following features: ● control of iron and chromium in the minimum content, prevent the generation of β phase Ni4Mo. ● The reducing environment of excellent corrosion resistance. ● excellent resistance to moderate concentrations of sulfuric acid and a number of non-oxidizing

15Mo3 Seamless Boiler Tube Alloy Steel Seamless Pipe For Heat Exchangers Seamless boiler tubes made from 15Mo3 alloy steel are critical components in a range of industrial applications where high temperature and pressure are involved. These pipes are particularly valued for their durability, heat resistance, and excellent mechanical properties. Below is a comprehensive overview of 15Mo3 seamless boiler tubes, covering material specifications, key features, and their

DIN 17172 StE 210.7 StE 240.7 StE 290.7 StE 320.7 StE 360.7 Gas Steel Pipe Low Alloy Long Distance For Flammable Gas Transportation Introduction DIN 17172 is a standard that specifies the requirements for low alloy steel pipes used in the transportation of flammable gases over long distances. The grades StE 210.7, StE 240.7, StE 290.7, StE 320.7, and StE 360.7 are designed to provide excellent mechanical properties and corrosion resistance, making them suitable for various

ASTM A572 Grade 42 50 55 60 65 Low Alloy Pipe High-Strength Low-Alloy Structural Steel Tube for Transporting Fluid Specification ASTM A572 is a specification for high-strength low-alloy structural steel plates and bars for use in building structures and other applications. The grades of A572 steel are categorized based on their yield strength, with Grade 42, 50, 55, 60, and 65 being the most common. These grades are designed to provide improved mechanical properties and

ASTM A335 Q195 Cold Drawn Seamless Ferritic Alloy Steel Pipe for High-Temperature Service ASTM A335 Q195 is a specification for cold-drawn seamless ferritic alloy steel pipes intended for high-temperature service. This standard covers various grades of alloy steel pipe, including Q195, and provides guidelines for their chemical composition, mechanical properties, and recommended applications. Material and Specification The ASTM A335 Q195 standard specifies the requirements

ASTM A335 P91 P1 P2 P5 P11 Alloy Steel Seamless Pipe: Chrome Moly Pipe for High-Temperature Service Material and Specification ASTM A335 is a specification for seamless ferritic alloy-steel pipe intended for high-temperature service. The grades covered under this specification include P1, P2, P5, P11, and P91, each designed to withstand elevated temperatures and pressures. These pipes are commonly used in power plants, petrochemical plants, and other high-temperature

GB/T 30059 Incoloy 800 800H 825 600 690 Seamless Corrosion-Resisting Incoloy Alloy Tubes For Heat-Exchanger Material Incoloy alloys are a family of high-performance alloys primarily composed of nickel, chromium, and iron. These alloys are designed to withstand high temperatures and resist oxidation and corrosion, making them ideal for heat exchanger applications in various industries. Specification The GB/T 30059 standard specifies the requirements for seamless corrosion

Alloy Seamless Steel Tube Pipe ASTM A209 T1 For Boiler And Superheater Material The material used for the Alloy Seamless Steel Tube Pipe ASTM A209 T1 is a low alloy steel that offers excellent strength and durability. It is specifically designed for high-temperature applications in boilers and superheaters. The composition of the material ensures its ability to withstand elevated temperatures and pressures while maintaining structural integrity. Specification The Alloy