Alloy Steel Pipe

Aircraft material Alloy Steel Pipe Nimonic90 Size : OD:6-530mm WT:0.5-50mm Length:1-12m Application : Aerospace fasteners, aviation, electric power, petrochemical, shipbuilding, machinery, electronics, environmental protection and other industries. Material Feature: High amounts of cobalt and a variety of strengthening elements . A higher tensile strength and creep resistance in the 815-870 ℃ Good resistance to oxidation Good corrosion resistance In hot and cold alternately

Alloy Steel Pipe Nimonic80A Torich Steel Pipe made from material Superalloy Nimonic80A, This material is a nickel-chromium matrix,the additiona of aluminum,titanium . Feature: Good creep resistance Good oxidation resistance Good thermal processing performance Application:Gas turbine hot section components Chemical component: C:0.04-0.10 Cr:18.0-21.0 Ni:- Al:1.00-1.80 Ti:1.8-2.7 Co:2.0 max Fe:1.50 max B:0.008 max Mn:0.40 max Si:0.80 max P:0.020max S:0.015max Ag 0.50 max Bi:0

Alloy Steel Pipe Incoloy seamless steel pipe 825 Chemical composition: Ni %:38-46 Cr %:19.5-23.5 Fe:Remained. C%:0.025 Mn%:1.0 Si%:0.5 Cu%:1.5-3.0 Mo%:2.5-3.5 Al%:0.2 Ti%:0.6-1.2 P%:0.02 S%:0.01 ​Characteristic: Good resistance to stress corrosion cracking. Good resistance to pitting and crevice corrosion. Good resistance to oxidatiom and non-oxidizing acidic heat energy. At room temperature and temperatures up to 550℃ have the good mechanical properties. Have certified

B163 Alloy Steel Pipe Incoloy800HT Incoloy 800HT Chemical composition: Ni :30.0-35.0 Cr:19.0-23.0 Fe:39.5 C:0.06-0.1 Mn:1.5 Si:1.0 S:0.015 Cu:0.75 Al:0.15-0.60 Ti:0.15-0.60 Metallographic structure: face-centered cubic structure,The extreme low carbon element content ,improve the rate of Ti:C ,so that it also improve the structural stability, intergranular corrosion resistance.950℃ low temperature annealing assure the crystal structure. Mechanical properties: Mechanical

Alloy Steel Pipe Incoloy A-286 Charactistic of material: Chemical composition: C: ≤0.08 Cr:13.5-16.0 Ni:24.0-27.0 Mo:1.00-1.50 Ti:1.75-2.30 Fe:remaind V:0.10-0.50 B:0.001-0.010 Mn:1.00-2.00 Al ≤0.04 Si:≤1.00 P:≤0.030 S:≤0.020 Fe-25Ni-15Cr base superalloy + molybdenum,titanium,aluminum,Vanadium Physical properties: Density 7.94 g/cm³ 0.287 lb/in³ Melting Point 1430°C 2600°F Coefficient of Expansion 16.4 μm/m °C (20 - 100°C) 9.1 x 10-6 in/in °F (70 - 212°F) Modulus of Rigidity

Alloy Steel Pipe HastelloyX Hastelloy X is a kind of nickel-based superalloy with high iron content, which is mainly solution strengthened by chromium and molybdenum solution strengthening. It has good resistance to oxidation and corrosion resistance. It has good cold & hot formability and weldability because its moderate lasting and creep strength under 900℃. Used in the manufacture of aircraft engine combustion chamber components and other high temperature components. It

Alloy Steel Pipe Hastelloy C-4 Hastelloy C-4 Application: Hastelloy C-4 has been widely used in most of the chemical industry and high-temperature environments. Typical fields of application: ● flue gas desulfurization system ● pickling and acid regeneration plant ● production of acetic acid and agrochemicals ● production of titanium dioxide (chloride method) ● electrolytic plating The corrosion resistance of Hastelloy C-4: Higher molybdenum and chromium content make

Alloy Steel Pipe Hastelloy C-276 nickel-chromium-molybdenum alloy Welded steel pipe Hastelloy C-276 is a nickel-chromium-molybdenum alloy containing tungsten content of silicon, carbon is very low. Standard of Hastelloy C-276: ASTM B462,STM B564, ASTM B575 and so on Hastelloy C-276 is characterized by: ● In the oxidation and reduction status, for most corrosive medium has excellent corrosion resistance. ● excellent resistance to pitting, crevice corrosion and stress corrosion

Alloy Steel Pipe Hastelloy C nickel-chromium-molybdenum alloy Welded steel pipe Hastelloy C is a nickel-chromium-molybdenum alloy containing tungsten content of silicon, carbon is very low. Standard of Hastelloy C : ASTM B462,STM B564, ASTM B575 and so on Hastelloy C is characterized by: ● In the oxidation and reduction status, for most corrosive medium has excellent corrosion resistance. ● excellent resistance to pitting, crevice corrosion and stress corrosion cracking.

Alloy Steel Pipe Hastelloy B-2 Welded steel pipe corrosion-resistant, nickel-molybdenum alloy Hastelloy B-2 Hastelloy B-2 is a corrosion-resistant, nickel-molybdenum alloy solid solution state. Hastelloy B-2 It has the following features: ● control of iron and chromium in the minimum content, prevent the generation of β phase Ni4Mo. ● The reducing environment of excellent corrosion resistance. ● excellent resistance to moderate concentrations of sulfuric acid and a number of

Super Alloy Steel Pipe Precipitation Hardening Alloy 41 For Engine Components Alloy Steel Pipe Alloy 41 precipitation hardening Nickel-Base Superalloy Alloy41 is a precipitation hardening Nickel-Base Superalloy, and it has higher tensile and lasting creep strength and good oxidation resistance within the temperature range of 650~950℃. Since the alloy of aluminum, titanium, molybdenum content is high, the ingot blooming is more difficult, but the material after deformation has

Wear Environment Alloy Steel Pipe Alloy 6B Cobalt - Based PED Certification Alloy Steel Pipe Alloy 6B cobalt-based alloy Alloy 6B is a cobalt-based alloy for wear environment, anti-seizure, anti-wear, anti-friction. It has a low coefficient of friction, which can make sliding contact and other metals and no wear in most cases. Even without lubricant, or cannot use lubricant applications, Alloy 6B minimizes scuffing and wear. Alloy 6 B wear-resisting performance is inherent,

ASTM B111 /EN 12451 Straight copper nickel tubes Grade:C68700 C44300 C70600 C71500 C26000 C27000 C27200. Application:condenser ,finned tubes,ship repair and building,oceaneering Has been approval by TUV PED,CCS ,and Lloyd's ISO 9001 . General size: OD 3-50mm WT 0.8-20mm according to customer's requirement. Chemical requirements Copper or copper alloy UNS No. Copper Tin Al Ni incl Co Pb max Fe max Zn max Mn max As Sb Pmax Cr Other named elements C44300 70.0-73.0 0.9-1.2 　 　 0

Welded Titanium Cold Drawn Seamless Steel Tube ASTM B338 GR2 Size range:OD20-28mm WT2,2.5,3mm OD8*1.5 OD12*1 OD12.7*0.7 OD16*.08 OD16*2 OD 19*0.8 OD19*1 OD19/25*2 OD38*1 OD50*1 OD19*1.2 OD25*1.2 Other size is also avaliable. Application:Condenser and heat exchanger aircraft engine Production method: Welded. Chemical Requirements Composition % Elements Gr 1 Gr 2 Gr 3 Gr 7 Gr 9 Gr 11 Gr 12 N max 0.03 0.03 0.05 0.03 0.03 0.03 0.03 C max 0.08 0.08 0.08 0.08 0.08 0.08 0.08 H max 0

JIS G 3462 STBA 12 STBA 13 STBA 20 STBA 22 STBA23 STBA 24 STBA 25 STBA 26 Alloy Steel Boiler and Heat Exchanger JIS G 3462 Alloy steel boiler and heat exchanger Standard:JIS G 3462 Wall thickness 0.5-50mm Diameter 5-420mmLength Upon request Application: for boiler and heat exchanger Produce method: STBA 12,STBA13,STBA20,,STBA 22 :electric resistant welding STBA 25 STBA 26 :Seamless Heat treatment: STBA 12,STBA13:Low temperature annealing, isothermal annealing, full annealing,

A369/A369M FPA , FPB , FP1 , FP2 Carbon and Ferritic Alloy Steel Forged and Bored Pipe Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service Testing: Additional Tension Test Additional Flattening or Bend Tests Ultrasonic Tests Hydrostatic Test Metal Structure and Etching Tests TABLE 1 Chemical Requirements Grade Composition FPA FPB FP1 FP2 Carbon 0.25max 0.25max 0.10-0.20 0.10-0.20 Manganese 0.27-0.93 0.29-1.06 0.30-0.80 0.30-0.61 Phosphorus,max 0

Seamless Cold Drawn Alloy Steel Pipe andTube 35CrMo 25CrMo4 for Precision Engineering 35CrMo 25CrMo4 Seamless Alloy steel tubes Size: 5-350mm WT: 0.5-35mm Seamless Alloy steel tubes with Alloy steel 35CrMo 25CrMo4 35CrMo: C: 0.32-0.40 Si: 0.17-0.37 Mn: 0.40-0.70 Cr: 0.80-1.10 Mo: 0.15-0.25 25CrMo4 C: 0.38-0.29 Si: 0.10-0.40 Mn: 0.60-0.90 Cr: 1.9-1.20 Mo: 0.15-0.30 Production method: 1. Hot Rolled 2. Cold drawn 3. Cold rolled Mechanical properties: Tensile strength ≥980 Mpa

Alloy Steel Tubes 41Cr4 40Cr DIN1.7035 Seamless Steel Tubes with alloy steel grade 41Cr440CrDIN1.7035 International equivalent: JIS: SCr440 ASTM: 5140 ISO: 41Cr4 41Cr4DIN1.7035: C:0.42 Si:0.25 Mn:0.70 Cr: 1.05 40Cr: C:0.37-0.44 Si:0.17-0.37 Mn:0.50-0.80 Cr:0.80-1.10 Seamless steel tubes with these steel grade could achieve good mechanical properites with quenching and tempering heat treatment (QT), could also heat treatment with annealed. Application: Gear wheel, axle, shaft,

Alloy steel tubes 34CrMo4 42CrMo4 Seamless steel tubes with alloy steel grade 34CrMo442CrMo4 34CrMo4: C: 0.30-0.37 Si: 0.40 Mn: 0.40-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo4: C: 0.38-0.45 Si: 0.40 Mn: 0.60-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo: C: 0.38-0.45 Si: 0.17-0.37 Mn: 0.50-0.80 Cr: 0.90-1.20 Mo: 0.15-0.25

Alloy Steel Tube Grade GB/T3077 38CrMoAl ISO 41CrAlMo74 Structural steel tubes standard GB/T3077: 38CrMoAl ISO: 41CrAlMo74 GOST: 38X2MOA(38XMOA) DIN: 41CrAlMo7 34CrAlMo5 BS: 905M39 905M31 NF: 40CAD6.12 30CAD6.12 Chemical composition: C :0.35~0.42 Si:0.20~0.45 Mn:0.30~0.60 S :≤0.035 P :≤0.035 Cr:1.35~1.65 Ni:≤0.030 Cu:≤0.030 Mo:0.15~0.25 Tensile strength: σb (MPa):≥980(100) Yield strength:σs (MPa):≥835(85) Elongation:δ5 (%):≥14 ψ (%):≥50 Impact: Akv (J):≥71 αkv (J/cm2):≥88(9)