Transformer Manufacturing Machinery

1. Technical conditions 1.1 Technical parameters: 1.1.1 Rated working temperature: 850 ℃ Maximum temperature: 900 ℃ 1.1.2 Effective average temperature zone size: 2600 X 1000 X 1200 (h) 1.1.3 Rated processing capacity: 5T/furnace 1.1.4 Rated heating power: 220kW 1.1.5 Furnace temperature uniformity (at constant temperature): ± 5 ℃ 1.1.6 Working vacuum degree: ≤ 10Pa 1.1.7 Ultimate vacuum degree: ≤ 9 × 10-2Pa 1.1.8 Cold state leakage rate: ≤ 0.67Pa/h 1.1.9 Cooling fan power:

The vacuum pouring tank is designed with a pouring valve inside the pouring tank to prevent air from entering the resin during the vacuum pouring process. The pouring valve is 100% airtight, ensuring the quality of pouring. Main process parameters of vacuum pouring tank: 1. Material ratio measurement accuracy ± 3 ‰, control accuracy ± 1% (including vacuum conditions); Control the fluctuation of material temperature and pouring tank temperature within ± 1 ℃; 2. Adopting thin

Epoxy vacuum casting equipmentStatic casting of transformers Advantages of static mixing and pouring equipment: 1. Automatic batching, improving the accuracy of mixing ratio and reducing labor intensity. 2. Automatic material preparation, vacuum can be set, automatic control, to avoid the evaporation of accelerators and other substances caused by prolonged high vacuum. 3. Suitable for automatic proportioning of resins, curing agents, and fillers. 4. Adopting a static mixer,

Epoxy vacuum casting equipment ① Large scale production can be carried out using raw materials, and customization can be made according to the different needs of different users Suitable for using raw materials and semi-finished AB materials for production, with unlimited degassing and mixing time. ③ The feeding amount of materials is automatically weighed electronically and controlled by a programmable controller. The feeding process adopts a closed type. ④ Computers

Overview The KZ series vacuum oiling equipment is mainly used for vacuum oiling treatment of amorphous transformers, high-voltage oil immersed transformers, high-voltage oil immersed bushings, and power capacitors. The oil injection system of this equipment can automatically operate and perform quantitative oil injection and other processes on the product. Vacuum oil injection is necessary for oil immersed transformers above 220 kV; We also try to use vacuum oiling for 10 kV

Transformer vacuum drying equipment Introduction: The transformer vacuum drying equipment is a unique technical product developed by our company based on domestic traditional technology, combined with the company's experience in the design and production of vacuum equipment. This equipment is mainly used for drying the bodies of oil-immersed transformers, mutual inductors, capacitors, reactors and other products. It reduces drying time by 40% -50% compared to conventional

Introduction Vacuum pressure impregnation equipment is mainly used for insulation treatment of electrical products. For example, insulation materials for high-voltage motors, wind turbines, H-class insulated dry-type transformers, power capacitors, and cables are impregnated. Products such as motors or transformer coils can be dehydrated and degassed during the vacuum stage by vacuum pressure impregnation, reducing the impact of impurities such as water and gas on insulation;

Based on the principle of variable pressure vacuum drying and the design and production specifications of vacuum equipment, combined with our long-term experience in transformer manufacturer production, we manufacture and produce it mainly for the drying of oil immersed transformers, transformers, and capacitors. The vacuum drying equipment continuously changes the pressure inside the drying tank during the drying process, making the product heated and heated evenly, and can

Specifications: Φ 2.5X3 meters Φ 3X4 meters Φ 3.2X4.5 meters Φ Specifications such as 3.8X6 meters, length can be made according to customer requirements. Cantilever rotary door, vacuum suction door. with Φ 2.5m × Taking 3m (straight section) as an example, the heating power is 30KW, and the drying time of the 2000KVA/10KV transformer body is 11 hours. The variable pressure vacuum drying equipment is currently an ideal equipment for drying oil paper insulation power equipment

Configuration list: 1 set of vacuum tank body 1 set of door opening mechanism 4 sets of discharge pipes inside the tank 1 set of work trolley 1 set of tank door sealing ring 3 sets of temperature sensors 1 set of track inside the tank 1 set of stainless steel insulation armor 1.1. One set of electric door opening system 1.1.1. The electric side movement of the tank door opens the door, the cylinder is locked, and the travel switches of each action are interlocked for

Vacuum drying equipment for transformers Features: By adopting the pressure swing drying process, the drying time is reduced by about 30-40% compared to conventional vacuum drying, with reliable performance, high efficiency, and energy saving. Computer automatic control, achieving true unmanned and fully automatic drying. The computer automatically performs endpoint judgment, and the judgment results are accurate and reliable. The heat transfer oil and steam heating method

Vacuum drying equipment for transformers Features: By adopting the pressure swing drying process, the drying time is reduced by about 30-40% compared to conventional vacuum drying, with reliable performance, high efficiency, and energy saving. Computer automatic control, achieving true unmanned and fully automatic drying. The computer automatically performs endpoint judgment, and the judgment results are accurate and reliable. The heat transfer oil and steam heating method

Brief Introduction: Transformer vacuum drying equipment is improved on the basis of our company at home and abroad, and I am in the vacuum equipment design, manufacturing experience, user experience and developed, and the equipment is mainly used for oil-immersed transformers,transformers,capacitors, reactors, and other products of the body is dry, than conventional vacuum drying reduces drying time 40%--50%,Is a reliable, energy-efficient technology and equipment equipment.

Product Overview The variable pressure vacuum drying equipment is a new type of energy-saving and efficient vacuum drying equipment launched by our company through technical cooperation with German expert to the electrical industry. This equipment adopts the variable pressure process, which improves work efficiency by 30-40% and saves 30-40% energy compared to ordinary vacuum drying. So far, our company has exported to more than 20 countries different sizes of variable

vacuum drying equipment Introduction: Variable voltage vacuum drying equipment is currently an ideal equipment for drying oil paper insulated power equipment such as transformers with voltages of 220kV and 110kV and below, transformers with voltages of 500kV and below. Compared with traditional hot air circulation drying, ordinary vacuum drying, and low-frequency drying equipment, it reduces processing time by about 1/3, energy consumption by 30% -50%, and the minimum

Introduction: Distribution transformers are one of the important equipment in the power supply and distribution systems of industrial and mining enterprises and civil buildings. The purpose of transformer vacuum drying treatment is to remove moisture from the insulation material of the transformer and improve its electrical performance; On the other hand, causing the insulation components of the product to shrink and deform is beneficial for compression deformation, ensuring

4000×3000×3000 Transformer vacuum LPG drying equipment Technical proposal The purpose of transformer vacuum drying treatment is to remove moisture from the insulation material of the transformer and improve its electrical performance; On the other hand, causing the insulation components of the product to shrink and deform is beneficial for compression deformation, ensuring the geometric dimensions of the product and increasing its mechanical strength. Because on transformers,

6000×4000×5000 Transformer vacuum drying equipment Technical proposal and quotation The Variable pressure vacuum drying equipment is manufactured by our company according to the German expert J The drying principle proposed by Dr. Moore (DR, MOLL) is developed based on our experience in the design and manufacture of vacuum drying equipment. The equipment is mainly used for drying the bodies of oil immersed transformers, transformers and capacitors, which can reduce the drying

Our company produces resin casting molds for dry-type transformers, which can be designed and produced according to user drawings. The molds are divided into two types: hard molds and soft molds, both of which use mirror surface non repaired steel as the outer mold. The connectors and baffles are processed through a flat grinding process. 1. Hard mold assembly and disassembly are convenient, efficient, not easily damaged, and durable. 2. The soft mold has the characteristics

Product Description: 1. The size specifications of irregular parts have great flexibility. 2. Breaking the traditional copying method for edge cutting, it can process workpieces of any shape. 3. The use of new technology has overcome the defect of easily damaging cutting tools when cutting irregular parts with large aspect ratios in the past, reducing production costs. 4. Adopting the principle of hydraulic transmission, combined with an electro-hydraulic and pneumatic