Electrical Power Pole

132KV Q345 Material 4mm Electric Power Pole 3 Sections with Climbing Rung Specifications: Design of pole Against earthquake of 8 grade Minimum yield strength 355 mpa Minimum ultimate tensile strength 490 mpa Max ultimate tensile strength 620 mpa Length of per section Within 14m once forming without slip joint Welding We has past flaw testing.Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1

3.5mm Q345 Material Electric Power Pole 2 Sections with Climbing Rung Specifications: Shape Conoid ,Multi-pyramidal,Columniform,polygonal Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Marks Name plate through rivert or glue ,engrave ,emboss as per customer requirement Joint of Poles Insert mode,inner flange mode,face to face joint mode

Q345 Material 3mm Electric Power Pole 2 Sections for 110KV Power Transmission Parameter: 1.Type: Straight Pole, Tensile Pole, Turn Pole 2.Max length per section: 14 m 3.Thickness: 2.5mm ~ 30 mm 4.Shape: Conical or polygongal tapered 5.Material: Q235B/A36/A283 M Gr.C / SS400/S235 JR / St 37-2 / Fe 360 Q345B/A572 M Gr. 50/S355 JR / ST 52-3/Fe 510 Q390/A633 M Gr.50/St E380 Q460/A572 M.Gr.65 6.Power: 10 KV ~ 550 KV 7.Finish: hot dipgalvanization, blasting, powder coating,

8M 5KN Gr65 Material 3mm Electric Power Pole for 110KV Power Transmission Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Galvanization Standard:NFA91121 Average thickness of the galvanization:Not less than 70μm. Manufacture Tolerance -Component Length:-25mm to

11.8M 20KN Gr65 Material 4mm Electric Power Pole for 69KV Power Transmission Galvanization Standard:NFA91121 Average thickness of the galvanization:Not less than 70μm. Manufacture Tolerance -Component Length:-25mm to 75mm -Straightness:2mm/m -Twisting degree:1per 3 meters length -Ovalisation:Maximum is 3% -The average diameter:+/-0.5% -Slip length:+/-150mm Specifications: Design Load in Kg 300~ 1000 Kg applied to 50cm from the to pole Marks Name plate through rivert or glue

65FT Gr65 Material 6mm Electric Power Pole 3 Sections with climbing Rungs Specifications: Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 Design Load in Kg 300~ 1000 Kg applied to 50cm from the to pole Marks Name plate through rivert or glue ,engrave ,emboss as per customer requirement Surface treatment Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required Joint of

60FT Gr65 Material 6mm Electric Power Pole with climbing Rungs Material: The material we use is from Baosteel.According to the different strength request,we can use the Q235,Q345 and GR65.The strength of GR 65 is best and Q235 is lowest. For the street light pole,we usually choose Q235 and Q345. The good quality of steel material guarantee the good quality of the finished steel pole. Installation -Remove all the equipment on the pole during Assembly. -Circle a sling around th

132KV hot galvanization electrical power pole for electrical line Specifications: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal , Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Tolerance of dimension +- 2% Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor

Hot dip galvanization electrical power pole for over headline project Specifications: Type Straight Pole ,Tensile Pole ,Turn Pole Suit for Electricity distribution Shape Conoid ,Multi-pyramidal , Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Tolerance of dimension +- 2% Power 10 KV ~550 KV Safety Factor

20M Q345 Material Electric Power Pole with Bitumen for 69KV Transmission Specifications: Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 Design Load in Kg 300~ 1000 Kg applied to 50cm from the to pole Marks Name plate through rivert or glue ,engrave ,emboss as per customer requirement Surface treatment Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required Length of

8M 3mm Electric Power Pole Q345 Material with Bitumen for 69KV Transmission Specifications: Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 Design Load in Kg 300~ 1000 Kg

12M Galvanized Electric Power Pole Q345 Material for 110KV Transmission Specifications: Suit for Power Transmission Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Torlance of the dimension +- 2% Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety

10M 11M 12M Hot dip Galvanized power distribution pole price electric steel pole Specifications Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per

35kv 38kv Polygon Steel Utility Power Pole Electrical Transmission Specifications: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Torlance of the dimenstion +- 2% Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety

7.5m 9m Electrical Power Pole For Electricity Distribution Quick information: Tubular steel pole, also called steel tube pole, is intended for use in illuminating roadways, parks, pathways, etc. These poles are made of quality steel pipes that are joined by arc welding. Therefore, poles thus produced have good mechanical characteristics and in shape satisfy all esthetic requirements of contemporary public lighting. Surface protection is by hot-dipping or with protective

Specifications: Height From 9 meter to 100 meter Suit for Electric Power Transmission and Distribution Shape Polygonal or Conical Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Power Capacity 10kV to 220kV Tolerance of the dimension According to client’s requirement. Surface treatment Hot dip galvanized Following ASTM A 123, or any other standard by

1250 Dan 17M 8 Sides Electrical Power Pole 4mm Thickness Direct Burial ASTM A123 Galvanization Standard Milky Way fabricates a variety of poles for the utility industry. These steel poles are designed and tested to ensure bend resistance, load capacity, and height all meet the requirements for the application of the tower. Anchored and/or direct embed styles available. General Notes: Manufacturer drawings available for all poles Poles can be modified to any configuration

Product Description: The galvanized steel pole is a versatile, strong, and corrosion-resistant product suitable for multiple industrial and municipal applications. Its zinc coating of ≥ 86 microns, range of pole shapes (round, octagonal, polygonal), ultimate tensile strengths from 235 to 500 MPa, and thickness options from 1mm to 40mm make it an adaptable and dependable choice. The hot dip galvanized finish enhances its longevity and reduces maintenance costs, making it an

Product Description: The galvanized steel pole is a versatile, strong, and corrosion-resistant product suitable for multiple industrial and municipal applications. Its zinc coating of ≥ 86 microns, range of pole shapes (round, octagonal, polygonal), ultimate tensile strengths from 235 to 500 MPa, and thickness options from 1mm to 40mm make it an adaptable and dependable choice. The hot dip galvanized finish enhances its longevity and reduces maintenance costs, making it an

Product Description: The galvanized steel pole is a versatile, strong, and corrosion-resistant product suitable for multiple industrial and municipal applications. Its zinc coating of ≥ 86 microns, range of pole shapes (round, octagonal, polygonal), ultimate tensile strengths from 235 to 500 MPa, and thickness options from 1mm to 40mm make it an adaptable and dependable choice. The hot dip galvanized finish enhances its longevity and reduces maintenance costs, making it an