Toys Testing Equipment

Test : The machine applies to test the durability of toys lid switch that can be repeated. Through toys ld movements by the driven force of a rotating pendulum, to simulated hinged part of the toy lid is intact or not after a certain number of repeated opening and closing movements. Standard:16 CFR 1500, ASTM F963 4.8, EN71-1 2014 8.31.3 , ISO 8124 -1 5.13 Youtube Video : how does it work ?click here . Control mode: Controlled by Micro-computer automatically Action mode:

Test : This is a measuring apparatus which applies dial gauges for accurate, easy, and speedy measurement of thickness of plastics,film,sheeting and other sheet material with high accuracy. Standard:ISO 4593, Plastics — Film and sheeting — Determination of thickness by mechanical scanning. AS/NZS ISO 8124.1:2019 Clause 5.10.2 Main Parameters: Micrometer Brand: Mitutoyo, Japan Range: 0-12.7mm Graduation: 0.001 mm ((1µm) ) Throat depth: 150mm Total Accuracy: ± 3µm Contact Point

Use:Apply to test the strength of toy scooter steering tubes,including resistance to downward forces and resistance to upward forces. Standard: EN71-1 8.27, ISO 8124-1 5.29 Strength of toy scooter steering tubes Specification : Loading method Cylinder loading Control mode Touching Screen Control Test load (25±0.2)kg , (50±0.5)kg ,(100±1)kg Dimension 1200×1000×1700mm Weight 170kg Optional accessories : Air compressor Service and Support Our company focuses on research and

Specification: part weight(Kg) diameter(mm) height(mm) a 10.42 150±2 75±2 b 14.58 178±2 75±2 c 4.16 d 2.00 e 0.50 Standard: EN71-1 2014 8.22.2 Loads for determination of dynamic strength., ISO8124-1 5.27 Dynamic strength for toy scooters;,NM300-1 Service and Support Our company focuses on research and development , we were produced some intelligent testing equipments over thirteen years, we continue to provide stable performance, high-quality equipment for product quality

Used to measure the electric resistivity of cords of toy kites and other flying toys. Cords of toy kites and other flying toys linking the toy to the child and with a length of more than 2 m, shall be made of material with an electric resistance exceeding 100 MΩ/cm of cord, when measured according to 8.19 (electric resistivity of cords). Standard: EN71-1 8.19,ISO8124-5.11.3 electrical resistance Specification: Maximum reading:9999 Test range:10k-1TΩ (0.01~106MΩ) Accuracy:

Use:Apply to test the strength of toy scooter steering tubes,including resistance to downward forces and resistance to upward forces. Standard: EN71-1 8.27, ISO 8124-1 5.29 Strength of toy scooter steering tubes Specification : Loading method Cylinder loading Control mode Touching Screen Control Test load (25±0.2)kg , (50±0.5)kg ,(100±1)kg Dimension 1200×1000×1700mm Weight 170kg Optional accessories : Air compressor Service and Support Our company focuses on research and

Universal Toys testing instrument Applications: This Japan Peacock Dial Thickness Gauge Meter is suitable to determine plastic film and slice thickness. Standards: EN-71-1 section 8.25 ASTM F963 section 8.21 GB 6675-2 section 5.10 ISO 4593 GB 6675-2 section 5.10 ISO 4593 Technical specifications Type: standard needle - plate thickness gauge Dividing value (mm) : 0.01 Measuring range (mm) : 0 ~ 10 Throat depth (mm) : 120 Probe style: Φ 10 mm ceramic surface Application: to

Universal Toys testing instrument Applications: This Japan Peacock Dial Thickness Gauge Meter is suitable to determine plastic film and slice thickness. Standards: EN-71-1 section 8.25 ASTM F963 section 8.21 GB 6675-2 section 5.10 ISO 4593 GB 6675-2 section 5.10 ISO 4593 Technical specifications Probe style: 5mm metal plane Minimum reading: 0.001mm Measuring depth: 20mm . Applicable industries: textile fabric, film, paper, gold, metal and other items of thickness measurement,

Universal Toys testing instrument Applications: The noise meter is used to measure the sound pressure level comes form sound toys in a predetermined distance, so that the possibility of hearing damage that might be caused by toys that are designed to produce sound can be minimized. Standards: EN-71-1 section 8.28 ISO 8124-1section 5.25 GB6675-2 section 5.25 ASTM F 963 section4.5 and 8.19 16CFR 1500 section 47 Technical specifications Major test index Lxyi, Lxyp, Lxeq, Lxmax,

Universal Toys testing instrument Purpose of equipment This machine is the test stand for noise meter, used to assist in measuring the volume decibel produced by sound toys in a predetermined distance, then minimize the possibility of hearing damage that might be caused by toys that are designed to produce sound. Technical specifications Optional Accessories : AWA6228 Noise meter Standards: EN-71-1 ISO 8124-1 GB6675-2 ASTM F 963 16CFR 1500 All kinds of children products can

Universal Toys testing instrument Swings and Activity Toys Stability Tester-Horizontal Thrust Tester Purpose of equipment This instrument is used to test the stability performance for activity toys and swings. A horizontal force is applied at the top of the toy to simulate a child climbing on the toy, observe whether the toy tips over. A horizontal force is simultaneously applied at each suspension point to simulate the horizontal forces created by pendulum effect, observe

Description: The yo-yo ball test appratus is used to measure the initial length and elastic constank of the Yo-Yo Ball, then to jude if the elastic tether will cause any potential damage to children's neck. Specification: 1. Mass: 0.05±0.001kg,0.1±0.005kg,0.2±0.005kg 2. Steel ruler: 1.4m or 1m 3. dimension(WxDxH): 400x400x1500mm 4. Standard: EN71 8.37.1 /8.37.2 Service and Support Our company focuses on research and development , we were produced some intelligent testing

Product information It is to measure the initial length and elastic constant of the Yo-Yo ball. Includes steel ruler, measurement and graduated scale and weights. Technical parameters Length measuring system, DC motor with speed adjustment, intelligent MCU control. Wall fixing support or floor stand seat(adjustable) Encoder and intelligent control signal transmission system Rotating speed:1-150(adjustable) Stroke:0-1000MM(adjustable) Dimension: 400*1000*1400 Weight: 80kg

Standard : ISO8124 , EN71 , ASTM F963 SPJ Manual Vertical Tension Stand Application: SPJ manual operational vertical machine frame is used for push & pull strength tester prepare. Suitable for torn testing, press tension testing etc Dimension: L×W×H(mm)152×233×425 weight : 20kg Other purchase option items: Pull&Push Force Gauge Service and Support Our company focuses on research and development , we were produced some intelligent testing equipments over thirteen years, we

Drop Ball Impact Testing Apparatus adops DC magnetic control, the ball will be sucked automatically when it placed under the magnetic chuck, press the drop button, the ball will be free fall, impacting the test object surface. The falling height can be adjusted up or down, the drop height can be see by the height scale. The key components of the machine are made from Japan, reliable performance, multi-drop attachments; make your test accurate and effective. Apply standard:

Projectile Velocity Tester /Kinetic Energy Testing Instrument / speed-detecting catapult tester Toys Testing Equipment - Touch screen control ,Test report print Purpose of equipment HUST Tony Toys testing instrument - kinetic energy tester. TW-219A speed-detecting catapult kinetic energy tester, it can test catapults, accumulated catapult toys, non-accumulative catapult toys, such as toy guns, toy cars , strollers, balls, crickets and so on . Our toys kinetic energy tester

TW-269 Dynamic Strength Test Load Ride On Toy Dynamic Strength Test Keywords : laboratory equipment / professional tester / toys testing machine This weight is mainly used for wheeled ride-on toy dynamic strength and scooters braking performance test , toys for the children under 36 months, should use the 29.5kg weight while toys for the children are 36 month and over should use the 54.5kg weight. Configuring two arms and seat belts. Purpose of equipment Load for determinatio

TW-252 Pacifier Test Fixture 16 CFR 1511 ASTM F 963 4.22 Keywords : laboratory equipment / professional tester / toys testing machine Purpose of equipment To determine whether the pacifiers for infants present choking or suffocating hazards, A pacifier is placed centrally in the opening of test fixture. The nipple is subjected to a tensile force of lbs and held for 10 seconds. If the shield is pulled through the fixture, the pacifier has failed. Technical specifications Role

Keywords : laboratory equipment / professional tester / toys testing machine Purpose of equipment To simulate the mechanical damage through an impact action likely to be performed by a child. Assessment of sharp edges, sharp points and small parts may be carried out after impact. Technical specifications 1. Dimension: 300(l)x300(w)x16(h)mm 2. Adjust height: 0-200mm 3. impact hammer diameter: 80.00mm 4. Impact hammer weight: 1Kg 5. With metric / lmperial unit height dicate

Children products testing equipment / Toys tester / baby carriage testing instrument Children Ride-on-Toys Dynamic Testing Equipment , Strength Testing Machine For Wheeled Ride On Toys Purpose of equipment Dynamic Strength Test Machine is suitable for testing the performance of children riding a tricycle after hitting a block with a speed of 2m/s. Dynamic Strength Test Machine simulates the running state of a child riding tricycle. After placing the specimen on a certain load