Toys Testing Equipment

ASTM F963 EN71.8.17 Standard Mouth Toys Durability Tester Applications: To prevent mouth moving toys or children's mouthpiece has been mistakenly inhaled and cause a choking hazard Advantages: 1. Instruments to meet the 5s at least 295 cubic centimeters within + / -10 cubic centimeters of gas, and can be 10 times alternately blowing, suction toy. 2. Equipped with high precision pressure gauge and suitable for different toys tracheal connector Gas flow can be ajusted by valve

Ball Pressure Test Device with NM300-6, IEC60695-10-2, IEC 60884-1, IEC60320-1 standards Specificaitons: 1.0 Comply with the standards of NM300-6, IEC60695-10-2(2003), IEC 60884-1, IEC60320-1, IEC60335-1, IEC60598-1, IEC60950-1.；GB4943,GB2099. 2.0 Ball diameter: 5mm±0.05mm(Radius 2.5mm) 3.0 Ball pressure: 20N(including loading device and ball) 4.0 Test stand: 100mm (H) x 50mm (Diameter) and Hole diameter 2mm 5.0 Material: made of stainless steel

Impact Tester With Standard EN71 Professional Toys Testing Equipment Descripitons: Reduce the material damage or the danger of imitation toys protection devices as the real face. Range: imitation protect device (clear material protector, headpiece ,cap, blinker) Standards: EN 71-2011 8.7 impact test. Specifications: dimension 300(l)x300(w)x16(h)mm impact hammer diameter 80.00mm adjust height 0-200mm impact hammer weight 1Kg (hammer and rod) with metric / imperial unit height

Sharp Point Tester For Existence Endanger Safe / Lab Toys Testing Equipment Descriptions: The Sharp Point Tester is used to examine a toy of position whether the existence endanger safe of sharp -edged sharp point. Belongs to the test item of the toy safety; All accessoriness is made of nonrust material . The technical parameters requirement of all countries is consistent. Dimensions: 112x 16x16mm Weight: 1 pound Standards: 16 CFR 1500.48, ASTM F963 4.9, EN-71 2011 8.12, ISO

Sharp Edge Tester Dangerous Edge Testing Toys Testing Equipment The Sharp Edge Tester is used to touch to examining a toy of position whether the existence endanger safe sharp-edged edge, belong to the test item of the toy safety. Dimensions: 260*120*180mm (L*W*H) Weight: 1.99 kg Standards: ISO 8124-1 4.6, 5.8 sharp-edge test, EN71-1 2011 8.11 Sharpness of edges, ASTM F963-11 4.7, 16 CFR 1500.49 Accessories: charging unit 1 pcs foot switch 1 pcs base plate 1 pcs Standard

Laboratory Toys Testing Equipment Lake Shore Model 425 Gauss Meter Descriptions: Designed to meet the demanding needs of the permanent magnet industry, the Lake Shore Model 425 gauss meter provides high end functionality and performance in an affordable desktop instrument. Magnet testing and sorting have never been easier. When used in combination with the built in relay and audible alarm features, the Model 425 takes the guesswork out of pass/fail criteria. Additional

Imada Mechanical Force Gauge Push Tension Gauge Pointer Toys Testing Equipment Specification: Model: FB-200N Brand: Imada (Japan) No batteries needed. Intrinsically safe in hazardous environments. Capacity up to 200N (push and pull). FB Ranges (Resolution) Accuracy: 0.3% F.S. Real time and peak mode. Full set of accessories and carrying case included

Inclined Plane Device for Stability Test TW-270 Toys Testing Equpment Description: Inclined plane device angle ajustable range: 0-15degree Aluminum frame Inclined plane use imported plate,19mm Fine core plate Use P60 alumina and abrasive paper to cover the plane. oblique plane size:W*L1000*1500mm (or specified by customer) Applications: Use the toys can be loaded one child weight. Loading on the toys,which is worst standing position or seating position, Children below

25kg / 50kg Dynamic Strength Weight Toys Testing Equipment Loading Weight Specification: part weight(Kg) diameter(mm) height(mm) a 10.42 150±2 75±2 b 14.58 178±2 75±2 c 4.16 d 2.00 e 0.50 Standard: EN71-1 2011 8.22.2 Loads for deterination of dynamic strength.

Dynamic Strength Tester for Wheeled Ride-on Toys-Impact Test 2 m/s Tester Description​: This machine is used to test the dynamic strength peroformace of toy scooter by such movement that drive the toy three times at a steady speed of (2.0±0.2)m/s perpendicularly into a non-resilient step with a height of (50±2)mm. Principle: The machine simulates the running performance of the toy scootors with a load. The load is secured to the toy and ariticulated arms with the elbow joints

Yo-yo Ball Tester TW-263B Toys Testing Equipment Elastic Coefficient Testing Description: The yo-yo ball test appratus is used to measure the initial length and elastic constank of the Yo-Yo Ball, then to jude if the elastic tether will cause any potential damage to children's neck. Specification: 1. Mass: 0.05±0.001kg,0.1±0.005kg,0.2±0.005kg 2. Steel ruler: 1.4m or 1m 3. dimension(WxDxH): 400x400x1500mm 4. Standard: EN71 8.37.1 /8.37.2

Yo-yo Ball Tester Toys Testing Equipment ASTM F963 Yoyo Ball Safety Performance Test Instrument Description: The yo-yo ball rope extension test instrument makes the length measuring system( to calculate the elongation length) and the yo-yo ball installed in the same spindle for rotating.When the yo-yo ball rotates at the speed 80r/min, the line of the ball will stretch along the centrifugal direction, and the test line(one end fixed in the ball, the other end fixed on the

Sharp Point Tester Sharp-edged Toys Testing Equipment Dangerous Sharp Points Test Instrument Purpose: Determine there are any dangerous sharp points of toys result in potential sting or hurt. The Sharp Point Tester is used to examine a toy of position whether the existence endanger safe of sharp-edged sharp point. Belongs to the test item of the toy safety; All accessorieses is made of nonrust material . The technical parameters requirement of all countries is consistent.

Surface Flammability Tester Toys Fabric Surface's Flammability Testing Instrument Description: The surface flammability Tester commonly used in the examination down or the superficial knowledge fabric's flammability, the flame spreads fast in the fabric surface, but the fabric Kieb structure is incombustible. Specifications: fixture length 400mm burner move speed 150±5mm/s burner stroke ≥300mm fabric plush altitude 70mm Space between two fixtures 100mm sample dimension length

Toys Comprehensive Flammability Tester Children Clothing Toys Burning Test Instrument Machine Description: It is used for testing the flammbility of toys,children clothes,evalute the following toys flammability speed,time.Testing the child clothing or the toy and accessories’s flammability , appraises the following toy type the repidity of the flammability and time The PLC control, the time is accurate, English man-machine contact surface The different test method provides

Toys Testing Machines for ISO8124/EN71/ASTM F963 Mechanical and physical properties performance test. Sharp Edge Test,Sharp Point Test, Tension Test, Torque Test, Compression Test,Impact Test, Drop Test. Toys Tension Testing Clamp Small Parts Cylinder Impact Tester Sharp Point Sharp Edge Tester TW-205 Test Fixture for Small Balls Small ball test fixture is use to examine a toy up of whether small ball accessories may result in the child swallow, stop breath way and esophagus

Toy Box Cover Durability Tester Toy Chest Tester Toys Testing Equipment Box Cap Durability Test Instrument Description: The machine applies to test the durability of toys lid switch that can be repeated.Through toys ld movements by the driven force of a rotating pendulum, to simulated hinged part of the toy lid is intact or not after a certain number of repeated opening and closing movements. Standards: 16 CFR 1500, ASTM F963 4.8, EN-71-1 2011 8.31 Toy chest lids, ISO 8124 -1

Accessibility Probes Toys Testing Instrument Fake Finger Touch Probe Testing Equipment Description: To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Applications: Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe B for 37-96 months Standard:

Bite Test Clamp Toys Testing Equipment Sharp Points / Sharp Edges / Small Parts Testing Instrument Purpose: To simulates a child biting the accessible area of toys or other items to test the possibility hazards or misuse result from the biting. The part of the toy being tested is placed in a bite test clamp & a specified force is applied for a specified period. The toy is then tested to ascertain whether or not any hazards result from the bite test such as sharp points/ sharp

Rattle Test Fixture Geometry Template Oval / round bell tester Toys Testing Equipment Test Instrument Description: Oval / round bell tester (sound toy test template) is a simulation of children's oral capacity to detect parts on the toys or toys may cause choking or swallowing, and dangerous Specifications: Material aluminum alloy, surface oxidation Size 80*65*30mm (oval template) 73*73*30mm (round template) Packing size 230*135*90mm Weight 600g Standards 16 CFR 1510; ASTM F