Vehicle Detector Sensor

PD132 Inductive Single Loop Detector - 20kHz Professional inductive vehicle single loop detector designed for car parking systems and automatic barrier gate operations. Engineered for reliable vehicle detection in access control applications. Technical Specifications Supply Voltage: 220V AC, 110V AC, 24V DC/AC, 12V DC/AC Voltage Tolerance AC: +10% / -15% Voltage Tolerance DC: ±15% Power Consumption: 4.5VA Output Relays: 240V/5A Operating Temperature: -20°C to +65°C Storage

PD-132 Inductive Vehicle Single Loop Detector 220V inductive vehicle single loop detector designed for automatic gate openers and barrier gates, providing reliable vehicle detection for access control systems. Installation Guidelines The detector must be installed in a convenient weatherproof location as close to the loop as possible. Choose an installation location away from heat sources and maintain at least 10mm distance from other devices (do not mount directly against

PD132 230VAC Inductive Vehicle Loop Detector Single channel vehicle loop detector designed for car access control systems and boom barrier applications. Prevents arm lowering while vehicles are passing and automatically lowers after vehicle departure. Product Overview Essential accessory for traffic and barrier systems that ensures vehicle safety by preventing arm closure during vehicle passage. Must be installed in weatherproof locations near the loop, maintaining minimum

AC220V Adjustable Inductive Vehicle Loop Detector 20kHz PD-232 PD-232 AC 220V Dual Channel 4 Steps Switch Adjustable Inductive Car Vehicle Loop Detector Product Specifications Model Number PD-232 Voltage Different voltage available Reaction Time 10ms Channels Double loop detector Storage Temperature -40°C to +85°C Frequency Range 20 kHz to 170 kHz Sensitivity Adjustable in 4 increments Dimensions 78x40x108 mm (L x W x H) Signal Holding Time Unlimited / limited when loop is

Single Channel DC12V 24V 5W Truck Loop Detector 20ms OEM and ODM supported LD500 single channel DC12V/24V car truck loop detector Product Overview The LD-500 loop detector is designed for vehicle detection applications including access monitoring, security systems, and traffic management. The output signal can control door drive mechanisms, operate barriers, activate card dispensers, and more. Technical Specifications Operating voltages AC220V±10% Power consumption

Driveway Safety Vehicle Loop Detector Double channel inductive loop detector for traffic control and vehicle detection applications. Product Overview The LD-410 vehicle loop detector is a dual-channel inductive loop detection system that operates by detecting changes in inductance within the loop caused by metallic components of passing vehicles. These changes are processed and evaluated by an integrated microprocessor. Features automatic calibration upon power application

Waterproof Vehicle Detecting Sensor Advanced 79GHz millimeter wave radar technology for precise vehicle detection in various environments with 9-24V DC operating voltage and 132.4g weight. Product Overview The SINOMATIC LD-500 Vehicle Detector Sensor utilizes 79GHz frequency technology to deliver accurate vehicle detection with superior anti-interference and environmental adaptation capabilities. Built with automotive-grade components, this waterproof (IP65) sensor withstands

RS485 Bluetooth Millimeter Wave Radar Sensor 77~81GHz Vehicle Radar Detector Advanced Parking Lot Detection Technology The 79G millimeter wave radar is an intelligent detection device specifically designed for parking lot applications. Unlike traditional systems requiring complex wiring, this radar only needs simple drilling installation on landing bars. It features Bluetooth connectivity for mobile APP configuration, allowing adjustment of trigger range and angle parameters

79G Anti-Smashing Millimeter Wave Radar Sensor For Boom Barrier Gate Product Overview The ITS-AX2 barrier gate control radar is specifically designed for entrance and exit management in parking lots and underground garages. By integrating with the main control board of gate control systems, it precisely controls boom barrier operation while preventing accidental impact on vehicles and pedestrians within the radar's detection field. Advanced Technology & Performance Utilizing

90mA Car Radar Detector Anti Interference 100ms Barrier Sensor Detector Product Overview Black Color 24 GHz Frequency Low Cost High Reliability Parking Gate Barrier Sensor Radar Detector Radar Vehicle Detector Advantages Convenient installation and maintenance No need to damage road surfaces No impact on vehicle access Advanced technology with reliable and stable operation High cost performance Convenient working distance setting All-weather operation capability Compatible

Anti Interference 0-6m Coverage Vehicle Radar Detector 100ms IP65 100ms Response Time 0m～6m Coverage Range Vehicle Radar Detector Sensor Radar Vehicle Detector Brief Introduction Radar Vehicle Detector is a non-contact detection device for targets such as vehicles and pedestrians. It operates in the millimeter wave band, transmitting linear frequency-modulated continuous wave signals to perform high-speed real-time processing of target reflections for fast detection. Radar

90mA IP65 Waterproof Vehicle Radar Detector Vertical Beam Convenient Installation Power Supply Boom Barrier Gate Vehicle Radar Detector Important Note: This radar product is only applicable to scenarios where vehicles pass straight through. It cannot be used for vehicle turning applications. Radar Vehicle Detector Overview The Radar Vehicle Detector is a non-contact detection device designed for targets including vehicles and pedestrians. Operating in the millimeter wave band

CE Barrier Gate 24GHz Car Radar Detector All-Weather Anti-Crash Access Control Solution Advanced 24GHz millimeter wave radar technology for reliable vehicle and pedestrian detection in barrier gate applications. Radar Vehicle Detector Overview This non-contact detection device operates in the millimeter wave band, transmitting linear frequency-modulated continuous wave signals to perform high-speed real-time processing of target reflections for fast and accurate detection of

Parking Barrier 100ms 24GHz IP65 Car Existence Radar Detector Low Cost High Reliability Parking Management Gate Barrier Sensor Car Existence Radar Detector Product Overview The Radar Vehicle Detector is a non-contact detection device designed for targets including vehicles and pedestrians. Operating in the millimeter wave band, this advanced detector transmits linear frequency-modulated continuous wave signals and performs high-speed real-time processing of reflected echoes

Anti Interference 24GHz 6m Detection Distance Vehicle Radar Detector Advanced 24GHz millimeter wave radar detector with 6-meter detection range, designed for reliable vehicle and pedestrian detection in access control systems. Technical Specifications Center Frequency24 GHz Horizontal Beam Width11° Vertical Beam Width43° Distance Adjustment Range2.0 m~6 m (8 levels) Response Time100ms Vehicle Inspection Miss Rate0.1% Coverage Range0 m~6 m Pedestrian Detection Miss Rate0.1%

IP65 1.2W 6m Distance Vehicle Loop Detector 7-28VDC Millimeter wave band non-contact vehicle and pedestrian radar detector with 6-meter detection distance. Product Overview This vehicle radar sensor is a non-contact detection device for targets such as vehicles and pedestrians. Operating in the millimeter wave band, the radar detector transmits linear frequency-modulated continuous wave signals to perform high-speed real-time processing on target reflections for fast

RS485 6m 24GHz Parking Lot Occupancy Barrier Gate Radar Sensor Advanced radar sensor designed for reliable vehicle and pedestrian detection in parking and traffic control applications. Product Features Cost-effective solution with easy operation and waterproof housing Suitable for direct outdoor installation in various weather conditions Adjustable detection range from 1 meter to 6 meters Applications Gate barrier radar (replaces traditional vehicle loop detectors) Parking

Anti Smash 1.2W 24GHz RS485 Barrier Gate Radar Sensor Product Specifications Product Radar sensor Working voltage 7-28VDC Working consumption 1.2W Detected Person, car Background threshold Auto or manual Sensitivity Adjustable Detect distance Max. 6m (adjustable) Dimension 105mm x 78mm x 26mm / 115mm x 85mm x 31.2mm Communication port RS485, on and off signal Material ABS+PC Protection IP65 Main Features 24GHz anti-collision technology eliminates ground cutting requirements

Adjustable 24GHz 1.2W 6m Water-Proof Barrier Gate Anti-Hit Radar Detector This advanced barrier anti-hit radar utilizes microwave radar technology, designed specifically for highway applications and parking lot entry/exit points to replace traditional loop detectors and loop systems. Key Advantages of Barrier Radar Detector Complete replacement for loop detectors with no wiring requirements, saving significant time and installation costs Simple installation process with easy

All-Weather & All Day Operation Parking Barrier Gate 24GHz Microwave Radar Detector 24GHz Microwave Radar Sensor for Accurate Parking Control and Vehicle Detection Radar Detector Features Stable detection of humans and vehicles Integrated design with compact form factor Easy installation and low maintenance cost All-weather and 24/7 operation capability Long operational lifespan Strong environmental adaptability Multiple communication protocol interfaces IP65 protection