IGBT Power Module

The FF400R06KE3HOSA1 is a rugged 600V 400A IGBT half-bridge module with Infineon Trench Field Stop IGBT3 technology. It offers low VCEsat (1.45V typical), fast switching up to 20 kHz, and soft-recovery diodes for reduced EMI. Ideal for motor drives, UPS, and welding equipment. 2500V isolation, -40°C to +150°C operation.

High-power IGBT module with 600V/400A rating, half-bridge configuration, and advanced Trench Stop technology for low conduction and switching losses. Ideal for motor drives, UPS, and solar inverters. Features isolated EconoPACK™ 3 package for easy mounting and excellent thermal performance.

Industrial-grade SCR module with 1600V Vdrm and 120A Itav. Pressure contact technology ensures reliable thermal cycling and high surge capability. Low on-state loss improves efficiency. Isolated baseplate simplifies mounting. Ideal for motor soft starters, rectifiers, and heating control.

High-voltage 200V SMD aluminum electrolytic capacitor rated for 105°C with low impedance and high ripple current capability. Ideal for SMPS, LED drivers, and industrial power modules. Features long load life, wide temperature range, and tape-and-reel packaging for automated assembly.

The TT600N16KOF is a 1600V, 600A dual thyristor module with pressure contact technology for high reliability. Features low VF of 1.32V, high surge capability of 21kA, and an isolated baseplate. UL certified, ideal for soft starters, rectifiers, and power controllers. Custom options available.

The SKM400GB12T4 is a 1200V 400A dual IGBT module featuring Infineon TRENCHSTOP IGBT4 technology with low VCE(sat) of 1.75V and 10µs short-circuit capability. It integrates CAL4 soft-switching diodes for high efficiency and low EMI. UL certified with isolated copper baseplate for excellent thermal performance, ideal for high-power drives and industrial converters.

The SKM75GB128DN is a 1200V, 75A dual IGBT module with low VCE(sat) of 1.9V for reduced conduction losses. Features fast switching, integrated CAL diode, 10μs short-circuit capability, and UL certification. Ideal for drives, inverters, and UPS systems.

The SKKT107B16E is a 1600V, 107A dual thyristor module in a compact SEMIPACK1 package. Features low forward voltage drop (1.35V) and high surge current (2.4kA) for efficient, reliable AC power control. Aluminum nitride ceramic baseplate with pressure contacts ensures excellent thermal cycling. UL recognized for industrial safety. Ideal for soft starters, drives, and phase-angle control.

The SKKT106/16E is a 1600V, 106A dual thyristor module with low forward voltage drop (1.35V typ) for high efficiency. Features AlN ceramic isolated baseplate, pressure contacts, and 2.4kA surge rating. UL certified for reliable use in soft starters, drives, and industrial power control.

The SKKQ800/14E is a 1400V, 800A single thyristor module with fast switching and low forward voltage drop of 1.37V. Features AlN ceramic base, pressure contacts, and amplifying gate for reliable high-current performance. UL certified, ideal for soft starters, inverters, and industrial power controls.

The SKKH570/18E is a 1800V 570A dual thyristor-diode module with amplifying gate for enhanced turn-on. Features low forward voltage drop of 1.44V, 19kA surge capability, and AlN ceramic isolated baseplate with pressure contacts. UL certified, ideal for soft starters and industrial power control.

The SKKE600/16 is a 1600V, 600A single diode module in SEMIPACK4 isolated package. Features ultra-low forward voltage drop of 1.5V for high efficiency, 22kA surge current capability, and excellent heat transfer via ceramic baseplate. UL certified for rectifiers, welding, and industrial power supplies.

1600V/116A IGBT module with integrated 3-phase bridge and boost chopper. Features 950A surge current, NTC thermistor, and UL certification. Compact SEMIPONT6 package with press-in pins for reliable connections in UPS, drives, and industrial power systems.

1200V/100A intelligent power module with 5th-gen CSTBT chip for low saturation voltage. Built-in gate drive with short-circuit, over-temperature, and under-voltage protection. UL recognized, 2500Vrms isolation, 7-Pac configuration ideal for industrial drives and inverters.

600V 100A intelligent power module with 5th-gen CSTBT chip for low 1.75V saturation voltage. Integrated gate drive and protection including short circuit, over-temperature, and under-voltage. UL recognized, screw mount, ideal for drives and servo applications.

High-reliability 1200V 75A intelligent power module with integrated drive, protection, and NTC sensor. Features low-loss 5th gen CSTBT chip, 2500Vrms isolation, and screw mount. Ideal for industrial drives, HVAC, and UPS systems.

The MIXA60WB1200TEH is a 1200V, 60A CBI IGBT module in E3-Pack. Features XPT technology for low VCE(sat), 10μs short circuit rating, and fast SONIC diode. Integrated NTC sensor. Ideal for AC drives, solar inverters, and UPS. High reliability with easy paralleling.

Ultra-low Rds(on) 135mΩ and low Qg for high-speed switching. Fast body diode, avalanche rated, and aluminum nitride isolation. Ideal for UPS, drives, and DC-DC converters. 100% original, ROHS compliant.

The DSEI2X101-12A is a 1200V dual diode module with two 101A diodes in an isolated SOT-227B package. Features ultra-fast recovery, low reverse recovery current, soft switching, and high dI/dt capability. Ideal for snubber, freewheeling, and UPS applications. Planar passivated chips ensure reliable performance.

The FS150R12KT4 is a 1200V, 150A six-pack IGBT module with low VCE(sat) and optimized switching losses for high efficiency. Features 10μs short-circuit ruggedness, integrated NTC sensor, and compact EconoPACK+ design. UL/CSA certified, ideal for drives, UPS, and industrial inverters.