Integrated Circuit Components
LPC1114FBD48/302 ARM Cortex-M0 32-bit MCU 50MHz 32KB Flash 8KB SRAM Low Power
ARM Cortex-M0 32-bit MCU with 50MHz CPU, 32KB Flash, 8KB SRAM, 42 GPIOs, and UART/SPI/I2C. Features
IRF7420TRPBF Dual N+P Channel MOSFET ±5.3A 20V SOIC-8 0.045Ω Rds(on) 1.8V Logic Level Fast Switching
High-efficiency dual N+P channel MOSFET with ultra-low 0.045Ω on-resistance and 1.8V logic level. Supports fast switching, 175°C operation, and space-saving SOIC-8 design. Ideal for power management, motor control, and battery protection. 100% original, ROHS compliant.
IRF4905PBF P-Channel MOSFET 55V 74A 0.02Ω TO-220 High Current Fast Switching
Ultra-low 0.02Ω on-resistance for high efficiency. P-Channel MOSFET rated at -55V and 74A continuous drain current. Features fast switching, low gate charge, and full avalanche rating. Ideal for power switching, motor drives, and DC-DC converters. 100% original, ROHS compliant.
HCPL-0631-500E 2-Channel 10MBd 3750Vrms Optocoupler SOIC-8
High-speed 10MBd optocoupler with 10kV/µs CMR and 3750Vrms isolation. Open collector output, low input current, and wide -40°C to 85°C temp range. Ideal for isolated interfaces and power supplies.
FM24CL64B-GTR 64Kbit Serial F-RAM I2C 1MHz 3.3V 8-Pin SOIC Nonvolatile Memory
64Kbit F-RAM with 100 trillion read/write cycles, 151-year data retention, and no-write-delay I2C interface up to 1MHz. Low power 100μA active current, 2.7V-3.65V supply, industrial temp range. RoHS compliant, ideal for reliable data logging.
FM24CL04B-G 4Kb 5V FRAM I2C Memory 1MHz 10^14 Cycles 40-Year Retention
High-endurance 4Kb FRAM with 10^14 read/write cycles, 150ns no-delay writes, and 40-year data retention. I2C interface up to 1MHz. Low power consumption, RoHS compliant, industrial temp range -40°C to +85°C. Ideal for data logging and industrial controls.
SPX3819M5-L-3-3/TR 3.3V 500mA Ultra-Low Noise LDO Voltage Regulator SOT-23-5
High accuracy 1% LDO with 30μVRMS ultra-low noise, 340mV dropout at full load, and 2.7V-16V wide input range. Features enable, reverse battery protection, thermal shutdown. Ideal for portable and industrial equipment. 100% new and ROHS compliant.
74HC595D 8-Bit Shift Register Serial-In Parallel-Out Tri-State Outputs 2V-6V SOIC-16
High-speed 8-bit shift register with tri-state outputs and low power dissipation. Features 55 MHz typical clock frequency, wide 2V-6V operating range, and easy daisy-chaining. Ideal for LED displays, output expansion, and industrial control. 100% original, ROHS compliant.
SN74CBTLV1G125DBVR 1-Channel Bus Switch 5 Ohm On-State Resistance 3.3V 2.5V Operation SOT-23-5
High-speed 1-channel bus switch with 5Ω on-state resistance for level translation and bus isolation. Supports 0-5V operation, ultra-low power, and hot insertion. Ideal for mixed-voltage systems and I²C/SPI multiplexing. RoHS compliant.
RT9018A-18GSP 300mA Mini LDO 1.8V Fixed Output Ultra-Low 55μV RMS Noise High 70dB PSRR 1.2V to 5.5V Input Fast Start-Up Tiny SOT-23-5 Package Ideal for Portable/RF Applications
The RT9018A-18GSP is a high-performance 300mA mini LDO regulator with fixed 1.8V output, ultra-low 55μV RMS noise, and high 70dB PSRR. Operating from 1.2V to 5.5V input, it features fast start-up in a tiny SOT-23-5 package. Ideal for portable and RF applications requiring clean, stable power.
PCM5100APWR 32-bit 384kHz Stereo DAC 112dB SNR TSSOP-16 for Portable Hi-Fi Audio
High-performance stereo DAC with 112dB SNR and
LT1800CS8 High Speed 100MHz Op Amp 400V/µs Slew Rate Rail-to-Rail Output SOIC-8
High-speed rail-to-rail input/output op amp with 100MHz bandwidth and 400V/µs slew rate. Features low 3.5mV offset, 7nA bias current, and 2mA quiescent current. Ideal for filters, ADC drivers, and low-voltage signal processing. Available in space-saving SOIC-8 package.
HMC245AQS16E SP3T RF Switch 0.1-6GHz 1.2dB Low IL 60dB Isolation 5V CMOS Control 50Ω RoHS
High-performance non-reflective SP3T switch covering DC to 3.5GHz with 0.7dB insertion loss and 36dB isolation. Integrated 2:3 TTL decoder reduces control lines. Ideal for basestation, CATV, and test equipment. RoHS compliant, 16-lead QSOP package.
EMI2121MTTAG Common Mode Filter 2 Lines 100mA 8Ohm WDFN8 ESD Protection for USB2.0
Integrated common mode filter with ESD protection for high-speed differential data lines. Offers >30dB attenuation at 800MHz, supports IEC61000-4-2 Level 4, and comes in a compact WDFN8 package. Ideal for USB2.0 and MIPI D-PHY interfaces.
EL7155CS 8-Channel Digital I/O 24V Optical Isolation 10-35V Wide Voltage 4kV ESD Protection 500kHz Industrial -40°C to 85°C RoHS PLC
High-speed 500kHz digital I/O module with 24V optical isolation and 4kV ESD protection. Wide 10-35V input range, -40°C to 85°C operation, RoHS compliant. Ideal for PLC and industrial automation. Custom options available.
TLP350H High-Speed 1Mbps IGBT MOSFET Gate Driver 2.5A Peak Output 3750Vrms Isolation SO6
High-speed 1Mbps gate driver with 2.5A peak output, 20kV/µs common-mode transient immunity, and 3750Vrms isolation. Ideal for industrial inverters, air conditioner inverters, and IGBT/MOSFET gate driving. 100% new and original, ROHS compliant.
STM6315 Ultra-Low 300nA IQ High-Accuracy ±1% Reset IC 1.8-5.5V SOT143-4
Ultra-low 300nA quiescent current reset IC with ±1% accuracy and watchdog timer. Features manual reset, programmable delay, and wide 1.8-5.5V input. Ideal for battery-powered IoT devices. Available in SOT143-4 package. 100% original, ROHS compliant.
SBRD10200TR 100V 20A SBR Rectifier Bridge Low Vf High Efficiency AEC-Q101 Qualified for Automotive Industrial Motor Drives
High efficiency SBR rectifier bridge rated 100V 20A with low forward voltage drop and 150°C junction operation. AEC-Q101 qualified, surge rated, and center tap configuration. Ideal for switching power supplies, converters, and brushed motor drives. RoHS compliant.
N76E003AQ20 8051 MCU 18KB Flash 1KB SRAM 12-Bit ADC 16MHz 20-Pin TSSOP 2.4V-5.5V
High-performance 8-bit 8051 MCU with 18KB Flash and 1KB SRAM. Features 12-bit ADC, 16 PWM channels, UART/SPI/I²C. Wide voltage range 2.4V-5.5V. Industrial temp -40°C to +105°C. Strong ESD/EFT immunity. Ideal for motor control and home appliances.
MCP602-I/SN Dual Op Amp 2.7V-6V 10MHz Bandwidth Rail-to-Rail I/O 8-Pin SOIC
Low-power CMOS dual op amp with 2.8MHz gain bandwidth, 230µA quiescent current per channel, and rail-to-rail output. Ideal for portable devices, sensor interfaces, and A/D drivers. Industrial temp range -40°C to +85°C. 100% original, ROHS compliant.