Pneumatic Cylinder Valve

2' DN25 UPVC CPVC PVC Butterfly Valve With Pneumatic Actuator BRANO’s range of pneumatically controlled butterfly valves, which are used to control the flow of a media remotely. They can have either a lug or wafer connection style. Based on the actuator design (single or double acting) the actuator will open and close the butterfly valve with compressed air (single acting uses a spring to either open or close the valve). The butterfly valve has a disc that rotates with the

UPVC CPVC PVC Pneumatic Actuated Butterfly Valve DN50 2' The main advantages of pneumatic actuator butterfly valve, simple structure, small size, light weight, low cost, pneumatic butterfly valve this feature is particularly significant, installed in the high-altiude tunnel, through two-five-way solenoid valve control easy to operate, but also can adjust the flow medium. Pneumatic Butterfly Valve is divided into Spring Returm(Single Acting) Pneumatic Butterfly Valve and

UPVC CPVC PVC Pneumatic Actuated Butterfly Valve DN50 2' BRANO’s range of pneumatically controlled butterfly valves, which are used to control the flow of a media remotely. They can have either a lug or wafer connection style. Based on the actuator design (single or double acting) the actuator will open and close the butterfly valve with compressed air (single acting uses a spring to either open or close the valve). The butterfly valve has a disc that rotates with the

DN25 1' Air Actuated Pneumatic Three Way Ball Valve Stainless Steel A pneumatic actuated ball valve uses compressed air to automate the control of media. Pneumatic actuated ball valves don’t rely on a motor, but they do require electricity when paired with an integral pilot or solenoid valve. Here’s a breakdown of the components: Pneumatic: Refers to the use of pressurized air or gas to create energy. Actuator: The component that is used to automate control of the ball valve.

DN25 1' Flanged Pneumatic Actuated Ball Valve Stainless Steel 304 Pneumatic ball valves are used to control the flow of a media, liquid or gas, by means of a rotating ball with a bore. The rotating ball is controlled by a pneumatic actuator that is capable of turning it. A ball valve is one of the most common valves due to their simple operation, reliability, long service life, and wide range of application uses. 2-way pneumatic ball valves have 2 ports, an inlet and an

DN25 1' Flanged 2/2 Way Pneumatic Angle Seat Valve With Plastic Head An angle seat piston valve is a pneumatically-controlled valve with a piston actuator providing linear actuation to lift a seal off its seat. The seat is set at an angle to provide the maximum possible flow when unseated. Angle seat piston valves are particularly suited to applications where high temperatures and large flow rates are required, such as steam or water. Pneumatic angle seat valve is a general

DN20 3/4' Flanged Y Type Pneumatic Angle Seat Valve Stainless Steel Pneumatic angle seat valve is a general switch in the automatic control system which are suitable in demanding applications such as steam, water and aggressive media. They are especially suited for vacuum and fast acting applications that require a long service life. It is widely used in printing, dyeing, bleaching, food, washing, chemical, water treatment, pharmacy and other automatic machinery and equipment

DN50 2' Flanged Air Actuated Angle Seat Piston Valve Pneumatic The angle-seat valves from BRANDO offer a long service life, reliable on-off and precise control performance. Due to the angled arrangement of the valve actuators in relation to the pipeline, the compact angle seat on-off and control valves can be installed and operated even in very confined spaces. Compared to traditional globe valves, the angle seat design from BRANDO offers a higher flow capacity. This design

1 1/2 Inch Welded Pneumatic Actuated Angle Seat Valve DN40 The pneumatic angle seat valve is an air operated linear process control valve that has an angled body to provide the maximum possible flow rate with minimal pressure loss across the piston valve when open. A piston actuator is connected to the valve plug and is available with either double acting or single acting function. The piston valve bodies are typically available in bronze or stainless steel with various port

1 1/2' Welded Air Actuated Angle Seat Valve Pneumatic DN40 Angle seat valves are 2/2-way pneumatically actuated piston valves. The piston actuator provides a linear motion to lift the seal off its seat. Because the seat is positioned under an angle, the flow is minimally impeded in the open position, resulting in an excellent flow rate and a low pressure loss. They are used to regulate the flow of liquids, gases, steam, vacuum and even aggressive fluids. They can also operate

1' DN25 Tri-Clamp Air Actuated Angle Seat Valve With Pneumatic Actuator Angle Seat Valves have a robust construction similar to globe valves, but use a piston operated angle seat valve with a closure spring. The body is normally cast or die-forged in one piece. A plug is connected to the end of the piston which is seated on PTFE seats. The piston is designed to retract further from the seat, thereby providing maximum flow rate. They may be Normally Closed (NC), Normally Open

1/2' Tri-Clamp Pneumatic Actuated Angle Seat Valve Stainless Steel BRANDO manufacture and export pneumatic angle seat valves which is operated through single or double acting piston actuator and fitted in angled position within pipelines in various industrial applications. These angle seat valves work efficiently in fluids such as air, water, chemicals and steam with a temperature limit of -10 ℃ to 180 ℃. Pneumatic angle seat valves are suitable for high and low pressure as

1' Y Type Tri Clamp Pneumatic Angle Seat Valve Stainless Steel An angle seat piston valve is a pneumatically-controlled valve with a piston actuator providing linear actuation to lift a seal off its seat. The seat is set at an angle to provide the maximum possible flow when unseated. Angle seat piston valves are particularly suited to applications where high temperatures and large flow rates are required, such as steam or water. Pneumatic angle seat valve is a general switch

1 1/4' Y Type Stainless Steel 304 Angle Seat Piston Valve Pneumatic Pneumatic angle seat valve is a general switch in the automatic control system which are suitable in demanding applications such as steam, water and aggressive media. They are especially suited for vacuum and fast acting applications that require a long service life. It is widely used in printing, dyeing, bleaching, food, washing, chemical, water treatment, pharmacy and other automatic machinery and equipment

1' Y Type Pneumatically Actuated Angle Seat Valve Stainless Steel An angle seat piston valve is a pneumatically-controlled valve with a piston actuator providing linear actuation to lift a seal off its seat. The seat is set at an angle to provide the maximum possible flow when unseated. Angle seat piston valves are particularly suited to applications where high temperatures and large flow rates are required, such as steam or water. When used in reverse some models of angle

3/4' 2/2 Way Pneumatic Angle Seat Valve Stainless Steel The pneumatic angle seat valve is an air operated linear process control valve that has an angled body to provide the maximum possible flow rate with minimal pressure loss across the piston valve when open. A piston actuator is connected to the valve plug and is available with either double acting or single acting function. The piston valve bodies are typically available in bronze or stainless steel with various port

1 1/2' Y Type Stainless Steel 304 Angle Seat Valve Pneumatic Angle seat valves are 2/2-way pneumatically actuated piston valves. The piston actuator provides a linear motion to lift the seal off its seat. Because the seat is positioned under an angle, the flow is minimally impeded in the open position, resulting in an excellent flow rate and a low pressure loss. They are used to regulate the flow of liquids, gases, steam, vacuum and even aggressive fluids. They can also

2 1/2' Threaded SUS304 Pneumatic Angle Seat Valve With Plastic Head Angle Seat Valves have a robust construction similar to globe valves, but use a piston operated angle seat valve with a closure spring. The body is normally cast or die-forged in one piece. A plug is connected to the end of the piston which is seated on PTFE seats. The piston is designed to retract further from the seat, thereby providing maximum flow rate. They may be Normally Closed (NC), Normally Open (NO)

3 Piece Thread Port Pneumatic Actuated Ball Valve Stainless Steel 304 Ball valves can be combined with a pneumatic actuator (pneumatic ball valves) or an electric actuator (electric ball valves) for automation and/or for controlling remotely. Depending on the application, automating with a pneumatic actuator vs an electric one may be more advantageous, or vice-versa. Pneumatic actuators control ball valves by the conversion of compressed air energy to mechanical motion. A

2 Way Thread Port Pneumatically Actuated Ball Valve Stainless Steel Ball valves can be combined with a pneumatic actuator (pneumatic ball valves) or an electric actuator (electric ball valves) for automation and/or for controlling remotely. Depending on the application, automating with a pneumatic actuator vs an electric one may be more advantageous, or vice-versa. Pneumatic actuators control ball valves by the conversion of compressed air energy to mechanical motion. A