Pneumatic Air Cylinders

CRB2BW40-180S SMC Type Pneumatic Rotary Actuator Cylinder Single Vane CRB2 Series, single or double vane, rotary actuator is available in 10, 15, 20, 30 and 40 bore. The single vane style uses specially designed seals and stoppers which enable this compact type actuator to rotate up to 270 degrees. Double vane type is standardized for 90 and 100 degrees. The lightweight design features a compact body with a built-in angle adjuster unit and auto switch unit. Rotating angle can

SI Series Airtac Type Standard Pneumatic Air Cylinders ISO 15552 SI Cylinder ISO 15552 are aluminum extrusion cylinders of the lobe type. The SI series conforms to ISO 15552 and the original ISO 6431. Bore sizes are range from 32mm up to 200mm. Cushions are standard and an optional piston magnet allows use of reed or solid state switches for position sensing. The double acting cylinders are available with double rod end, stroke adjustable versions, and standard single rod end

Parker Type DK C522 Z5050 DK 125 20 28 Pneumatic Cylinder NBR Complete Piston Seals DK C522 Z5050 (DK 125 20 28) Complete piston with integrated seals Praedifa series DK. 125mm OD 20mm ID 28mm Height. The DK complete piston with integrated end position cushioning is available in the following compounds: Z5051 - Industrial purpose Z5071- Heavy-duty Z5067- High temperatures Z5086- Medium-duty Piston seals can be designed for, and used with, integrated, or separate, back-up

SMC Type Pneumatic Air Cylinders Pneumatic air cylinders and pneumatic actuators can support automation by enhancing productivity, increasing throughput, and improving worker safety when they are appropriately specified. The products range from linear (round body, compact, tie rod), guided, rodless, rotary, gripper, locking, clamp, and stopper with variations of non-rotating, corrosion resistant, heat-resistant, repairable and other common options. SMC Type Compact Pneumatic

Airtac Type SI50x100 Pneumatic Air Cylinder 50mm Bore 100mm Stroke Pneumatic cylinders are typically used on industrial machinery and rely on compressed air pressure from 15 to 145psi. Pneumatic cylinders tend to have less overall cost associated when compared to hydraulic cylinders. Pneumatic cylinders offer more main body choices, including extruded aluminum profiles for easier integration into machinery. The heart of the device is the actuating cylinder piston which has

Aluminum Alloy Double Acting Pneumatic Cylinders , Small Air Cylinders Product features: 1. Mounting dimensions comply with ISO(International standard),Non-lubricated(avoiding oil- fog pollutioin); 2. Mainly made in aluminum alloy,light weight,small size 3. Cylinder tube and front and back cover are connected by male and female threads,can dismouting and repaired; 4. The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder

Airtac Type Pneumatic Air Cylinder Shop for Airtac type pneumatic actuators and air cylinders. We carry air grippers, guided air cylinders, standard air cylinders, round body air cylinders, compact air cylinders, rodless air cylinders, rotary actuators, clamping cylinders, and stopper cylinders. Pneumatic actuators and air cylinders move a load using pressurized air stored within a piston or diaphragm. Depending on the direction of the load, you’ll either need an air cylinder

CXSM6-10 SMC Type Double Rod Guided Air Pneumatic Cylinder SMC Type CXS Series Pneumatic Air Cylinder is a dual piston actuator with non-rotating accuracy ± 0.1°. CXS Series is available in six bore sizes and stroke lengths up to 100mm. This series is very compact and has a very accurate non-rotating specification. It is suited for accurate pick-and-place applications or light duty material handling. The CXS can be used with either reed or solid state switches. The CXSL high

Airtac Type MAL Series Mini Pneumatic Air Cylinder Aluminum Alloy Product Features of MA series Mini Pneumatic Cylinder: 1. Front and back cover and cylinder tube are connected by threads. 2. Piston adopts heterogeneous two-way seal structure. It has compact size and has the function of grease reservation. 3. Front cover adopts self-lubrication bearing guide that has good performance of lubrication and guide. 4. There are several modes of back cover, which makes the

Airtac Type HFZ Series Air Pneumatic Parallel Gripper Cylinder Airtac Type HFZ series Air Grippers are available in a single and double acting configurations with parallel or angular gripping styles 6mm to 32mm bore sizes are available. The single acting parallel grippers are available in normally closed or open type. Magnetic pistons are standard to allow the use of reed or solid state sensor switches. Product Features of HFZ Series Air Grippers: 1. Integrated design of

Airtac Type SDA32X80 Pneumatic Compact Air Cylinder 32mm Bore 80mm Stroke Pneumatic compact cylinders consist of pistons in enclosures that generate linear motion. Their compact size and low weight range allow for shorter strokes than standard cylinders which make them suitable for positioning, clamping and ejecting smaller components. Single-acting pneumatic compact cylinders have one port through which compressed air enters to push the piston rod in one direction. Spring

Airtac Type SU50X50 Air Pneumatic Cylinder 50mm Bore 50mm Stroke Common Pneumatic Cylinder Types: Single-acting cylinders (SAC) use pressure that forms from compacted air. In majority of cases, the extension SAC cylinders have is very limited due to the amount of space the compacted spring takes. Double-acting cylinders (DAC) use air pressure in order to retract strokes and move in range. Two parts make up this cylinder, both of which let the air in. One is for outstroke and

Double Acting Pneumatic Air Cylinder Airtac Type SC63x100 Pneumatic cylinders, commonly known as air cylinders or air rams, move a load in a straight line using a piston rod. Compressed air either pushes or pulls the piston rod in and out of the cylinder barrel. Single-acting cylinders use one compressed air port to either push or pull the rod in a single direction. The rod then returns via spring action. Double-acting cylinders use compressed air ports on both ends of the

Parker Type DK C520 Z5050 DK 125 20 26 Pneumatic Air Cylinder Piston Seals DK C520 Z5050 (DK 125 20 26) Complete piston with integrated seals Praedifa series DK. 125mm OD 20mm ID 26mm Height. The DK complete piston with integrated end position cushioning is available in the following compounds: Z5051 - Industrial purpose Z5071- Heavy-duty Z5067- High temperatures Z5086- Medium-duty Double acting piston seals contain pressure on both sides of a piston, which is applied from

Festo Type Air Pneumatic Cylinder BRANDO carry many types of pneumatic actuators, including air cylinders – also known as air rams (standard, compact, round body), guided air cylinders, rotary actuators, rodless cylinders, clamping cylinders, stopper cylinders, and air grippers. Complete your pneumatic system with air preparation products (including lubricators, filters, regulators and FRL units) and valves (solenoid, air pilot, fluid control and manual). We also offer

CRB2BS15-180S SMC Type Rotary Actuator Pneumatic Cylinder Vane Type CRB2 Series, single or double vane, rotary actuator is available in 10, 15, 20, 30 and 40 bore. The single vane style uses specially designed seals and stoppers which enable this compact type actuator to rotate up to 270 degrees. Double vane type is standardized for 90 and 100 degrees. The lightweight design features a compact body with a built-in angle adjuster unit and auto switch unit. Rotating angle can

2 Finger Angular Gripper Air Pneumatic Cylinder MHC2-16D SMC Type A pneumatic gripper uses compressed air to operate its jaws, also called fingers. These gripper fingers act a bit like human fingers by holding, handling, gripping the object into the required place. Most often these pneumatic grippers have 2 fingers (a parallel gripper or an angular gripper) or 3 fingers which use a single/ double acting cylinder for control purposes. There are 2 main types of gripper, the

Angular Gripper Pneumatic 2 Finger Air Cylinder SMC Type MHC2-16D Common place for a pneumatic gripper is as part of an automation process, where individual items such as tiny semiconductors to much larger parts such as car engines are manufactured, equally grippers are often added to robotics to enable and assist them with pick and place work in particular as well as with other interactions. Advantages of a pneumatic gripper: 1. The jaws have a high gripping potential 2. The

SMC Type MHC2-16D Angular Gripper Air Pneumatic Finger Cylinder A pneumatic gripper is a pick-and-place device that uses compressed air to operate gripper jaws, also called fingers. These fingers, similar to human fingers, help in grasping, holding and releasing the work pieces. Commonly, they have 2 fingers (parallel or angular) or 3 fingers with a single or double acting cylinder for control. They are mostly used in automated manufacturing processes to grip a work piece.

MHC2-16D SMC Type 2 Finger Angular Air Pneumatic Gripper Cylinder Angular Gripper: The pneumatic angular gripper can move its fingers in a radial manner, opening and closing around a central pivot point. They are often used in applications where limited space is available as the jaws can move up and out of the way. These grippers are good for holding large workpieces with odd shapes. Specifications of MHZ2 Series Air Grippers: Models Number of MHZ2 Series Air Grippers: