Non Destructive Testing Equipment

HMLF-2020 Tank Floor MFL Scanner 256 Sensors Distinguish Upper/Lower Side Corrosion Defect CAD Automatic Drawing Tank Bottom Corrosion Detector The HMLF-2020 tank bottom corrosion magnetic flux leakage scanner is one of the world's most advanced tank bottom corrosion detection systems , integrating multiple technologies. It is primarily used for magnetic flux leakage detection of tank bottom corrosion in the petroleum and chemical industries. The system features 192 MLF Hall

HFV-2206M Portable Industrial X-ray Film Viewer Integrated Densitometer Foot Switch Adjustable Brightness NDT Testing Equipment Features: Maximum Light Intensity: > 70,000cd/㎡ Easily View < 4. 0 Density Pure White LED Light 50,000 Hour Lamp Life Low Power Consumption Fan cooling Foot Switch Uniform Viewing Area: 98% Full Screen Dimmer Control: 0% to 100% continuous Surface temperature: 70,000 Cd/㎡ Film density

HBA-100 Handheld Barcol Hardness Tester Fiberglass Hardness Testing Instrument with Standard Test Blocks Introduction : A portable indentation hardness tester. Single hand operation; no operating experience required; can test any workpiece which is reachable in any site. Wide valid testing range equivalent to Brinell hardness 25-150HBW. Used to test the hardness of all kinds of aluminum, from very soft aluminum to very hard aluminum alloys. Extended application. Model HBA-100

HBA-100 Barcol Hardness Impressor for Aluminum Copper Rigid Plastic 25-150HBW Convertible Brinell Hardness Tester Introduction : A portable indentation hardness tester. Single hand operation; no operating experience required; can test any workpiece which is reachable in any site. Wide valid testing range equivalent to Brinell hardness 25-150HBW. Used to test the hardness of all kinds of aluminum, from very soft aluminum to very hard aluminum alloys. Extended application.

HG6410 Vibration Meter: Compact tool for fast machine failure detection. Measures velocity (0.1-199.9mm/s) with ±5% accuracy. Ideal for motors, pumps, and bearings. Holds readings for 40s, auto power-off.

HG6430 digital vibration meter measures acceleration, velocity & displacement with ±5% accuracy. Compact, battery-powered tool for quick machine failure detection, ideal for motors, pumps, and bearings.

HFV-2206M All-in-one LED NDT Film Viewer with Built-in Densitometer 70000cd/㎡ 0~4.0D Radiographic Viewing Lamp Features: Maximum Light Intensity: > 70,000cd/㎡ Easily View < 4. 0 Density Pure White LED Light 50,000 Hour Lamp Life Low Power Consumption Fan cooling Foot Switch Uniform Viewing Area: 98% Full Screen Dimmer Control: 0% to 100% continuous Surface temperature: 70,000 Cd/㎡ Film density

Model HG6410/HG6430 Vibration Meter Features: Used for fast failure detecting of motor, electric fan, pump, air compressor, machine tools and so on. Compact size, small weight, easy handling Prompt testing of vibration on the workshop machines For quick checking of unbalance misalignment, bearings and gears Guard against mechanical malfunction Holding tested value for 40 seconds Automatic switch off after 40 seconds HG6410 is used specially for velocity testing HG6430 is used

HG6430 Digital Vibration Meter for acceleration, velocity and displacement testing Features: Used for fast failure detecting of motor, electric fan, pump, air compressor, machine tools and so on. Compact size, small weight, easy handling Prompt testing of vibration on the workshop machines For quick checking of unbalance misalignment, bearings and gears Guard against mechanical malfunction Holding tested value for 40 seconds Automatic switch off after 40 seconds HG6410 is

HPA-2SE Programmable Variable Speed Metallographic Grinding & Polishing Machine For Metallurgy Laboratory Test I, Product Features 1. PLC+ high power motor, double grinding disc; 2. 1KW high power motor , no matter the speed is fast or slow, the torque is large and constant; 3. The speed range is wide, from 5 RPM to 1000 RPM (maximum 1500 RPM); 4. The working table quickly starts and stops, and the turntable can stop rotating in 2 seconds; 5. Speed, grinding time, rotation

HPA-2SE Double Disc Metallographic Grinding Polishing Machine PLC Touch Screen Specimen Preparation Equipment I, Product Features 1. PLC+ high power motor, double grinding disc; 2. 1KW high power motor , no matter the speed is fast or slow, the torque is large and constant; 3. The speed range is wide, from 5 RPM to 1000 RPM (maximum 1500 RPM); 4. The working table quickly starts and stops, and the turntable can stop rotating in 2 seconds; 5. Speed, grinding time, rotation

HC-300E Metallographic Specimen Cutting Machine Water Cooling Lab Sample Cutter HC-300E Cutting Machine is the first working procedure of making metallographic specimen . This machine uses a high-speed rotating thin enhance grinding wheel to intercept the sample. This machine is equipped with cooling system, prevent from burning sample groups in cutting. It is widely used in different metallographic laboratory, cutting all kinds of metallographic specimen. Quick clamping

HC-300E 2800R/min Laboratory Metallography Sample Cutting Machine With Circulating Cooling System For Material Test HC-300E Cutting Machine is the first working procedure of making metallographic specimen . This machine uses a high-speed rotating thin enhance grinding wheel to intercept the sample. This machine is equipped with cooling system, prevent from burning sample groups in cutting. It is widely used in different metallographic laboratory, cutting all kinds of

HC-350A Large Vertical Metallographic Cutter Grinding Wheel Laboratory Metal Nonmetal Sample Cutting Machine Application This machine is according to the principles of safety, environmental protection and design and manufacture of a large vertical metallographic cutting machine,Suitable for cutting various metal and nonmetal material sample,In order to observe the material metallographic,lithofacies organization. The machine running stable, low noise, easy operation, use

HC-350A Vertical Metallographic Sample Cutting Machine Φ110mm Max Cutting 4KW Water Cooling Specimen Cut-off Equipment Application This machine is according to the principles of safety, environmental protection and design and manufacture of a large vertical metallographic cutting machine,Suitable for cutting various metal and nonmetal material sample,In order to observe the material metallographic,lithofacies organization. The machine running stable, low noise, easy operation

HFV-700D High Uniformity Industrial Film Viewer Mitsubishi Acrylic Panel 7000-12000cd/m2 Adjustable Brightness NDT View Box The excellent selected material the viewer’s viewing screen and optical path material are all adopted of Acrylic glass plate manufactured by Japan Mitsubishi Liyan Co. Beyond the glass has a light transmittance and durability to ensure the non-deformation, do not change color. Using the latest technology abroad It adopts the newest backlighting

HFV-700D Large Size NDT LED X-ray Film Viewer 18×19 Inch Screen Industrial Radiographic Viewing Lamp The excellent selected material the viewer’s viewing screen and optical path material are all adopted of Acrylic glass plate manufactured by Japan Mitsubishi Liyan Co. Beyond the glass has a light transmittance and durability to ensure the non-deformation, do not change color. Using the latest technology abroad It adopts the newest backlighting technology of color LED

NDT X-ray Flaw Detector / Film Developer Processor With Digital Display HDL-P17A HDL-P17A NDT is the two high market, economical and practical industrial flushing machine. It washes the width and speed of high quality, good reliability and various specifications. It is widely used in the construction of boiler, shipbuilding, pressure vessel, petroleum and natural gas pipeline, and the quality inspection of various kinds of dynamic and pressure equipment. Praised by the

HFV-700C High Brightness 70000-118000cd/m2 NDT Film Viewer LED Industrial Radiography Viewing Light The excellent selected material the viewer’s viewing screen and optical path material are all adopted of Acrylic glass plate manufactured by Japan Mitsubishi Liyan Co. Beyond the glass has a light transmittance and durability to ensure the non-deformation, do not change color. Using the latest technology abroad It adopts the newest backlighting technology of color LED Standards

HUATEC-8DJ 0.05-10mm Thickness Geotextile Leak Detector LCD Display High Precision HDPE Membrane Pinhole Testing Equipment Instrument Features The HUATEC-8DJ Online Geotextile/Fill Barrier Leakage Detector is an intelligent pulse high-pressure type anti-corrosion layer quality detection instrument. It adopts anti-interference intelligent chips, anti-interference LCD screens and digital control circuits, making the instrument's high-pressure output more accurate, capable of