Thermocouple Cable

0.2mm*2 type E Thermocouple compensating cable with FEP / PVC insulation​ Specifications 1. Style:Extension Wire 2. Thermocouple copper wire Thermocouple copper wire Classification 1. Thermocouple level (high temperature level). This type of thermocouple wire is mainly suitable for thermocouple type K, J, E, T, N and L and other high temperature detection instrument, temperature sensor, etc. 2. Compensating wire level (low temperature level). This type of thermocouple wire is

Type T thermocouple cable TPX and TNX Fiberglass insulated TYPE T (Copper vs Constantan) is used or in an oxidation, inert or reduced atmosphere or in vacuum. It has highly corrosion with atmospheric moisture and condensate corrosion, and high stability is exhibited at low temperatures. It is the only type with error-limited uses for low temperature temperatures. 1. Chemical Composition Material Chemical composition (%) Ni Cu Si Iron Al TP(Copper) 100 TN(Constantan) 45 55 2.

Nickel Pleated Copper Extension Cable RTD PT100 PFA Insulated SUS Sheath 6 Cores 2 Pairs 250 Degree Celsius​ PT100-3x7/0.15-PFA-SUS-PFA Cable Specification Item Name RTD PT100 Extension Cable 　 Conductor Material Nickel Plated Copper Conductor Dia 7/0.15mm(0.13mm2, ±0.01mm) Insulation and Thickness PFA(long term: 250℃) 0.25mm Insulation Diameter 0.89mm(±0.1mm) Jacket Material PFA(long term: 250℃) 0.3mm Inner Sheath SUS304 Braiding(>90% covering) Outer Insulated Diameter 3.1mm

OHMALLOY have 20 years in producing the thermocouple alloy strip. The thickness can be from 0.1mm to 2mm while the width can be from 5mm to 210mm. Usually, we make the normal size such as 1mmX50mm, 0.75mmX50mm, 0.75mmX100mm, they are mainly used for all kinds of thermocouple plug pin. And we also can make special size based on client’s unique requirement. For the type KN, We have two types. One is china standard NiSi3 ( Ni 97%, Si 3%), the other one is NiAl ( IEC standard).

CuNi0.6 plate 0.5*100*1000mm for S/R thermocouple extension strip SNC (RNC) SNC (RNC) is regarded as negative leg for extension grade type S,R thermocouple cable. 1. Chemical Composition Material Chemical composition (%) Ni Cr Cu Mn Si RNC(SNC) 0.6 Bal 2. Physical properties and Mechnical properties Material Density(g/cm3) Melting point(℃) Tensile Strength(Mpa) Volume resistivity(μΩ.cm) Elongation rate (%) RNC(SNC) 8.9 1400 >390 2.8(20℃) >25 3. EMF Value range at different

3 wire type PT100 temperature sensor Technical data Model: 3 wire type PT100 temperature sensor Calibration grade: PT100 Probe length: 10mm( can be customized) Diameter of probe: 3mm(can be customized) Extension cable type: FEP+Silver copper braiding+FEP 0.2mm2 (0.15mm2-6mm2 is available) Length of extension cable 1m-50m ( Can be customized) Tolerance: Class 1 Unit price 6.0usd/pc for 2m length type

2 wire type 0.2mm2 PT100 temperature sensor Technical data Model: 2 wire type PT100 temperature sensor Calibration grade: PT100 Probe length: 10mm( can be customized) Diameter of probe: 6mm(can be customized) Extension cable type: Fiberglass+Tinne copper wire braiding 0.2mm2 (0.15mm2-6mm2 is available) Length of extension cable 1m-50m ( Can be customized) Tolerance: Class 1 Unit price 6.0usd/pc for 1m length type

K Type Sensor 0.5mm2 Fiberglass Stainless Steel Wire Braiding Technical data Model: K Type sensor Calibration grade: K Probe length: 300mm( can be customized) Diameter of probe: 3mm(can be customized) Extension cable type: Fiberglass+Stainless steel wire braiding 0.2mm2 (0.15mm2-6mm2 is available) Length of extension cable 1m-50m ( Can be customized) Tolerance: Class 1 Unit price 8.5usd/pc for 2m length type

2 wire type PT100 temperature sensor Technical data Model: 2 wire type PT100 temperature sensor Calibration grade: PT100 Probe length: 20mm( can be customized) Diameter of probe: 0.5mm-10mm(can be customized) Extension cable type: FEP+Silver copper Braiding+FEP 0.15mm2-6mm2 Length of extension cable 1m-50m ( Can be customized) Tolerance: Class 1 Unit price 6.5usd/pc for 1m length type

PT100 PFA Insulated 0.2mm*7/6 Nickel Plated RTD Cable Specifications: 1.Style:Compensation Wire 2.Thermocouple RTD wire Thermocouple RTD wire Classification 1. Thermocouple level (high temperature level). This type of thermocouple wire is mainly suitable for thermocouple type K, J, E, T, N and L and other high temperature detection instrument, temperature sensor, etc. 2. Compensating wire level (low temperature level). This type of thermocouple wire is mainly suitable for

Type E Thermocouple Extension Composition Cable Chromel Alumel TYPE E (CHROMEL vs Constantan) may be used in oxidizing, inert or dry reducing atmospheres, or for short periods of time under vacuum. Must be protected from sulfurous and marginally oxidizingatmospheres. Produces the highest EMF per degree o any standardized thermocouple. Material Chemical composition (%) Ni Cr Cu Mn Al EP(Chromel) 90 10 EN(Constantan) 45 55 Material Density(g/cm3) Melting point(℃) Tensile

Diameter 0.4mm*2 type K red and yellow PFA insulated extension cable Type K( CHROMEL vs ALUMEL) is used in oxidizing, insert or dry reducing atmospheres.Exposure to Vacuum limited to short time periods. Must be protected from sulfurous and marginally oxidizing atmospheres.Reliable and accurate at high temperatures. 1. Style:Extension Wire 2. Thermocouple extension wire Thermocouple wire Classification 1. Thermocouple level (high temperature level). This type of thermocouple

Electric heating wire Insulated material fiberglass Ni80Cr20 0.8mm OD of cable 1.4mm Product brief introduction Kapton Fiberglass Insulated NiCr 0Cr20Ni80 Nickel alloy wire for High Temperature Heating Ohmalloy not only produce the bare resistance wire. It can also provide the resistance wire with insulation as we have 30 years in producing the thermocouple extension cable. The insulated resistance wire are widely used for standard resistor, automobile parts, room heating....

Fiberglass Insulated NiCr80/20 electrical heating wire 0.5mm OD of cable 1.1mm Product brief introduction Kapton Fiberglass Insulated NiCr 0Cr20Ni80 Nickel alloy wire for High Temperature Heating Ohmalloy not only produce the bare resistance wire. It can also provide the resistance wire with insulation as we have 30 years in producing the thermocouple extension cable. The insulated resistance wire are widely used for standard resistor, automobile parts, room heating.....

KX-HF-KP-0.8 Chromel Alumel 24AWG 0.8mm 0.5mm type k cable wire with Kapton Product name Issuing Date Drawing no. Version Type K cable A/1 Item KX-HF-KP-0.8 Size 0.8mm Max temp 300℃ Voltage Drawing or picture Spec Unit Standard requirement Conductor Conductor structure N/mm Solid type Conductor material Positive leg (+) Chromel Negative leg(-) Alumel OD of conductor mm 0.8mm Pairs WRAPING —— ----- Insulation Material —— PTFE or PFA Insulation thickness mm 0.3 Min thickness mm

EX-HB-HB-0.3 Type E cable 400C Fiberglass 100M/roll Specifications Product name Issuing Date Drawing no. Version Type E cable A/1 Item EX-HB-HB-0.3 Size 0.3mm Max temp 400℃ Voltage Drawing or picture Spec Unit Standard requirement Conductor Conductor structure N/mm Solid type Conductor material Positive leg (+) Chromel Negative leg(-) Alumel OD of conductor mm 0.3mm Pairs WRAPING —— ----- Insulation Material —— 400℃ Fiberglass Insulation thickness mm 0.3 Min thickness mm 0.3

Ni 0.6% Cu 99.4% Alloy 11 wire (Cuni0.6) for S/R thermocouple extension rod SNC (RNC) SNC (RNC) is regarded as negative leg for extension grade type S,R thermocouple cable. 1. Chemical Composition Material Chemical composition (%) Ni Cr Cu Mn Si RNC(SNC) 0.6 Bal 2. Physical properties and Mechnical properties Material Density(g/cm3) Melting point(℃) Tensile Strength(Mpa) Volume resistivity(μΩ.cm) Elongation rate (%) RNC(SNC) 8.9 1400 >390 2.8(20℃) >25 3. EMF Value range at

JX-FG-FG-SSB 0.22mm2 round shape thermocouple extension cable Specifications: 1.Style:Compensation Wire 2.Thermocouple RTD wire Thermocouple RTD wire Classification 1. Thermocouple level (high temperature level). This type of thermocouple wire is mainly suitable for thermocouple type K, J, E, T, N and L and other high temperature detection instrument, temperature sensor, etc. 2. Compensating wire level (low temperature level). This type of thermocouple wire is mainly suitable

PIN Type K 4 Hollow Dual Thermocouple Cable With Ceramic Duplex Plug​ Product brief introduction Chromel, alumel and constantan contain unique material properties or characteristics that are necessary to ensuring the success of certain applications. However, these particular materials are incredibly difficult to work with, so there are few manufactures who have the expertise or ability to manufacture parts using these materials. Features and benefits • The pins are made of

Type K Custmozed Thermocouple MINI Plug ANSI Code Green Color Type K Thermocouple Plug Chromel, alumel and constantan contain unique material properties or characteristics that are necessary to ensuring the success of certain applications. However, these particular materials are incredibly difficult to work with, so there are few manufactures who have the expertise or ability to manufacture parts using these materials. Type Color Conductor material K Yellow(ANSI) or green