Solenoid Air Valve

pneumatic valve group shock absorber AA-VU4 block With E-level from Nico aiacor air suspension valve Specification Product name:8 solenoid manifold valve Port size:1/8 NPT Max.pressure:1.6Mpa Warranty of solenoid valv Maintenance instructions: 1. attention to check the use of components, in the transport process is damaged, and then install the use of. 2. When installing, please note that the gas flow direction and the takeover are correct. 3. when using, please strictly

Two position four way medical equipment high frequency low power low noise oxygenerator pilot solenoid valve Medium: air working pressure: 0.05-0.35MPa Position: two position four ways Threaded interface: G1/4 Material: aluminum oxide, or plating, spray paint. Coil voltage: AC220V, AC110V, DC24V, DC12V Connection mode: terminal box, lead wire type. Ordinary electromagnetic head combination type, B type installation: the side of the inlet and exhaust outlet, positive reversing

4v210-08 1/4‘ DC24v electric Solenoid Air Valve Strong sealing working underwater Specification Model 4V210-08 Working voltage DC12V DC24V AC24V AC110V AC220V AC380V Position and way NO. 2/5 way Effective area 16mm2(CV=0.89) Port size Air inlet=Air outlet=G1/4" Exhaust=G1/8″ Fluid 40 micron filtered air Operation Inside pilot type Operating pressure 0.15~0.8MPa Max.proof pressure 1.2MPa Temperature 5~50 C Allowable boltage ±10% of rated voltage Power consumption AC:4.5VA DC

with various kinds tubing size Clamp type pneumatic pinch valve Principle of magnetic pinch valve The electromagnetic valve (the valve) is driven by a solenoid, by pressing or loosen the hose to control the opening and closing. The medium only from the hose by, other parts of the body in the is not and chemical corrosive medium contact, only need to replace the hose can be. This means that compared with other types of electromagnetic valve, pipe clamp valve is more economic,

High frequency solenoid air valve Inner Guide Type pneumatic small micro valve 5 way 1/8 Characteristic: • Integral slot piston structure • Process valve hole with special high precision finishing process • Beautiful appearance • Good reverser • Reliable performance • Seal wear can automatic compensate Specification SY5120-01 AC110V series code V: solenoid valve series 1:100series position & coil single head double position double head and double position double head and

Energy saving kitchen gas natural gas liquefied gas special solenoid valve can be manually adjusted 1/4 6mm Specification Media gas, methane, diesel oil Medium Temperature -10C~80C Pressure 0.0~0.4Mpa Material brass Port size 1/4″~ 1″ Orifice DN6 Seal NBR, VITON Used for boiler and gas system,with manual override. Gas Solenoid Valve Characteristic: 1.Direct lifting diaphragm construction with high frequency 2.Manual override to adjust the flow rate when closed 3.Applied to

3 way Plastic Micro Solenoid valve port 2mm 6V DC 12V 24V Lead wring type Release valve exhaust discouraged Specification Working fluid: Air, Gas Rated Current: 170mA Rated voltage: 6V DC ,12V DC ,24V DC Rated working pressure: 300mmHg When not power , Port-2 is connected with Port-3 , but not connected with the Port-1 , Port-1 is sealed . When power , Port-2 is blocked, Port-2 is not connected Port-1 or Port-3, the Port-1 is connected Port-3 . Packing 1:Inner packing: opp

1/2 inch solenoid air Valve‘s On and Off is designed according to lever principle Specification Model SB197 Power AC22VA Working pressure 0~4bar Working pattern 2/2 Normal close Port size G1/2" Orifice 4mm Rated voltage AC24V-220V -10%~+10% 1. Valve"s On and Off is designed according to lever principle ,High reliability, Wide range of working medium. 2. The material of part which contact to working medium are VITON and SUS316,which and be widely used for Medical services,Food

HAILONG series 5 way 1/2 inch AC 220v herion 2636000 solenoid air valve Specification Model 8020750 8022750 8021750 8020850 8022850 2630600 2636000 2636200 2637050 2637250 Effective Section Area 10 mm(Cv=0.56) 40mm(Cv=2.23) 4mm (Cv=0.23) 10 mm(Cv=0.56) 40mm(Cv=2.23) Port Size Inlet=Outlet=G1/4 Inlet=Outlet=G1/2 In=Out= Exh=G1/8 In=Out=Exh=G1/4 In=Out=Exh=G1/2 Way & Position 3/2way 4/2way 5/2way Working medium 40um micron filtered air Working-pressure 0.15~1.0Mpa Max.

1/4 inch two position five way cut-off type large flow solenoid air valve ( tiger valve ) Specification Model K25JKD-08 Position and Way No. Two-position Five-way Effective Sectional Area 22.5 mm Working Medium 40 Micron Filtered Air Joint Pipe Bore Air Inlet=Air Outlet= Exhaust=1/4" Motion Pattern Inner Guide Type Working-pressure 0.25~1.0Mpa Max.Pressure Resistance 1.2Mpa Operating Temperature 5~50C Voltage Range -10%~+10% Protect Class IP65 Power Consumpton AC:5.5VA DC:4

low power latching solenoid valve used for gas burner consumption NPT 3/8 DC 6v 1.Specification Port size: NPT3/8" Orifice: 7mm Media: compressed air, gas Working type: pilot Working pressure: 150mbar Temp.: normal Voltage tolerance: ±10% Material: stainless steel Model LTSA016 Power 10W Working pressure 150mbar Pattern Normally close Connection ports NPT3/8" Orifice 7mm Rated voltage DC6-9V 1: Various style for each products and completely series auto parts products for you

3 way or 2 way solenoid valves for use with Domino ink jet printers Compact design with bable connection ports 1. Specification Model SB156 SB157 Working Medium Ink/Solvent Working type Direct action 2/2 3/2 Pattern 2/2Normally close 3/2:NC/NO/Divert Orifice 2mm 3mm Insulation class F class Joint Pipe Bore M5.G1/8" 2.5mm bable Pretection class IP65 Working-pressure 0~6Bar Rated voltage DC24V -10%~+10% Power 7W Max.pressure 16bar Material of Body Stainless steel SUS316 POM

truck parts solenoid valve and used for automobile flameout system With good dust-proof and shake-proof design SpecificationModelWP-1Working MediumCompressed airWorking typeDirect action 2/2 2/3PatternNormally closeOrifice1.5mmInsulation classF classJoint Pipe BoreM14*1.5~G1/4"Pretection classIP65Working-pressure0.3~0.9MPaRated voltageAC/DC24V~220V -10%~+10%Power12WMax.pressure1.6MPaMaterial of BodyAluminumSeal MaterialNBR.FKM 1.Used for pneumatic control system in truck,

low power small micro solenoid air valve compact valve for mini automatic machine Specification Model V165B06 V185B06 Working Medium Compressed air/Ozone Working type Direct action 2/2 Direct action 3/2 Pattern Normally close Orifice 1.5mm 1.8mm Insulation class F class Connection ports M5 Pretection class IP65 Working-pressure 0~1.0MPa -0.1~0.1MPa Rated voltage AC/DC24V~220V -10%~+10% Power AC4VA/DC2.8W Max.pressure 2.0MPa Material of Body Brass/Stainless steel SUS316 Seal

GG23JD-15 2.4Mpa or 3.5 Mpa three-way air compressor high pressure safety solenoid air valve Specification 1. Classical design,durable ai control design 2. Engery saving and environmental protection with big low rate,safety and precision 3. Can work at the low pressure,smartness for on and off,good seal performance 4. Single action and double action types for your selection 5. Widely used in the food,machin,industry,abstersion,lanification,printing and other area Model GG23JD

SLB high temperature or low temperature liquid (gas) nitrogen (N2), oxygen (O2), carbon dioxide (CO2) solenoid valve SLB high (low) temperature solenoid valve Product description: SLB series solenoid valve, the product for a series of production, large flow, good practicality, widely used in the steam, heat conduction oil and other high temperature, and low temperature and other fluid control. Made of imported high temperature resistant tetrafluoroethylene diaphragm structure

SLB high temperature or low temperature liquid (gas) nitrogen (N2), oxygen (O2), carbon dioxide (CO2) solenoid valve SLB high (low) temperature solenoid valve Product description: SLB series solenoid valve, the product for a series of production, large flow, good practicality, widely used in the steam, heat conduction oil and other high temperature, and low temperature and other fluid control. Made of imported high temperature resistant tetrafluoroethylene diaphragm structure

DN15A manual reset 1/2" Nickel-plated brass gas emergency shut off solenoid valves for home DC6-24V Features: This valve mainly be used in every kind of fuel gas pipeline being in danger (divulging, breakage) to give an alarm and quick closedown automatically, especially suitable for inflammable gas pipeline's safety and protection system. May match with each kind of alarm apparatus. Specifications: ◆ Suited Air:Natural Gas,Liquefied Gas,Manufactured Gas and Non-corrosiveness