Marine mooring equipment

Ease of handling and good buoyancy Low surface pressure with low reaction and High Energy Absorption Rate These fenders offer excellent energy absorption characteristic and do have a linear load deflection characteristic. They are very easy to install, remove and handle for various applications. Ease of handling and good buoyancy Low surface pressure with low reaction and High Energy Absorption Rate Easy installation & maintenance free Exceptional Compressibility and

The rotomolding jet ski dock is made of solid polyethylene shell with EPS foam inside.Solid and durable used to lift the jet ski. 1.Material:PE+EPS foam 2.measurement:2.8*1.7*0.3m 2.Buoyancy:1100KG 3.Weight:85KG 4.Function:used for protecting the jet ski from corrosion or algae. 5.Durable,tough,stable,environmentally friendly, resistance to most chemical. 6.Rotational molding one piece design, easy installation. You may also me us mail by bellow: Email: master@ccmemarine.com

jet ski dock Specifications: Dimension: 500mm×500mm×400mm(L*W*H) Weight: 7.0Kgs/ pc ± 0.3Kgs/ pc Floating Capacity: 350Kgs/ M2 Raw Material: HDPE wth UV Preference Temperature: -60°C/+80°C Color available: orange, blue, gray, black Load Capacity: each one square meter is made up of four pontoons, top load is 350kgs. Draft without load: 2.5-3cm; Draft with load of 150kgs: 15-20cm(safe); Draft with load of 300kgs:35-40cm(load limit) Anti Wind Wave: 1.The wave on water surface

All our fenders are frame work instead of hand-making, to have fenders with better quality and longer used time. Compared with traditional bumper-style rubber fender, it has the following features, absorbing greater impact, less reverse impact on the ships, easy installation, more elasticity, not being bent out of shape under pressure, less weigh and practical and economical. So pneumatic fender has widespread application on oil tankers, container vessels, luxury yachts,

1 Marine fender is with the use of high quality natural rubber nylon cord fabrics. 2 Good ageing resistance performance character is tics. 3 Using compressed air as damping medium, the rubber can transform flexibly under pressure, with large contact area, small reaction and absorb large amount of energy. 4 When berthing, the ship is almost at a certain angle, the marine fender can realize contact in a certain angle by bringing full play to its performance. 5 Floating on the

Rubber Fender 1.resistant to corrosion 2.small reaction 3.certification SGS CCC ISO9001:2008 4.top quality & best price Floating yokohama fender (for ship use) uses compressed-air as medium to absorb the energy from impact. The sides of ships are softer when berthing, so the result of collision-avoiding is achieved. All our fenders are frame work instead of hand-making, to have fenders with better quality and longer used time. Compared with traditional bumper-style rubber

1.Absorb more energy,less reverse impact on the ships and enhance port ability 2. Not being bent out of shape under pressure 3.More flexible ,easy installation 4.Good air tightness,safety and reliability 5.Produce according to ISO17357:2002 completely 6.Pass ISO ,CCS,DNV,ABS and so on 7.Many different sizes and shape available 8.Durable, practical and economical 9. Stringent,special and advanced manufacturing technique 10. The full set of manufacturing equipments experimentin

Specifications 1. U2 Stud link anchor chain 2. material:alloy, steel 3. stud link anchor chain and studless anchor chain 1. stud link anchor chain 2. size: all sizes 3. material: steel, 20Mn (CM490),30Mn(CM690) 4. can be supplied on reels, cut to length to meet customers' requirements 5. timely delivery, high quality and competitive price, satisfying service 6. remark: packed in bulk,steel drums,ton bags or as your requirements delivery time: within one month after order

We can manufacture all kinds of stud and studless anchor chains (Max. diameter 122mm) and accessories. In the near future, we'll be able to manufacture offshore mooring chains(upto to 142mm). Our manufacturing capacity is 35000 tons/year and our new branch company will be commissioning and our production capacity will enhance greatly. Products Common chains Accessory Details All kinds of grades of marine stud and studless flash welded chains with diameter from 2mm to 122mm

Configuration Parts Connection Pin Size:Dia. 185*48*245mm It is used to lock the pontoon lugs together. When the pin is pushed in and turned, a quarter turn locks the cube lugs together using two different locking systems. This ensures a superior locking. Side Fixation with Nut Size: Dia. 95*205mm The bolt and nut are used around the outside edge of the modular system assembly. Where tow float edges meet, the two lugs are locked together by the nut and bolt side fixation.

We can produce all kinds of marine outfittings: manhole covers, sea chest, bottom plug, steel small hatch covers, oil tight hatch cover, air hatch cover, engine room inclined ladder, cargo hold inclined ladder, marine steel inclined ladder, aluminum inclined ladder, marine steel vertical ladder, stainless steel inclined ladder, steps inclined ladder, accommodation ladder, wharf ladder, draft ladder, pilot ladder, etc. Class certificate(ABS, DNV, GL,LRS, BV, NK, KR or CCS)

1.material: pp/pe/nylon/polyester/sisal/uhmwpe fiber 2.diameter:4-60mm,4-88mm,28-150mm 3.type:twist/ braided 4.structure:3-strand, 4-strand, 8-srand, 6-strand, 16-strand, 24-strand, 32-strand 5.length:5m,10m,15m,20m...100m,200m,220mor as request 6.color: white, black, yellow etc. 7.packing: coil, reel,bundle,rool. 8.advantage: cutting resistance, strong corrosion resistance, radiation resistance, high strength 9.application:container vessel mooring,offshore platform,oil

Product description Pontoon cubes are environmental friendly without any kind of pollutions ,easy assembling and disassembling modular system,stable and secure on the water surface ,esthetically beautiful with various color combinations . Product Feathures This pontoon cube is widely applied as floating docks ,platforms for yachts ,boats ,motor-boats, ferry ,floating bridge,swimming pool,show-stages,floating house . easy to combine to T,H,E or Fshape as you wish to become a

Size: 50cm*50cm*40cm Weight Approx: 7kg (16 lbs ±2% Loading Capacity: 340kg/m2 Colour: blue, black, gray and yellow, etc Material: High-Density Polyethylene (HDPE) Quality: ISO 9001:2000 certificate Lifespan: 10-15 years, depending on the usage and site location condition. Accessories: Depending on the project. This cube is the base element for all kinds of construction for your installations.

Connection Pin Size:Dia. 185*48*245mm It is used to lock the pontoon lugs together. When the pin is pushed in and turned, a quarter turn locks the cube lugs together using two different locking systems. This ensures a superior locking. Side Fixation with Nut Size: Dia. 95*205mm The bolt and nut are used around the outside edge of the modular system assembly. Where tow float edges meet, the two lugs are locked together by the nut and bolt side fixation. Distance Disc Size:Dia.

Raw material : HMWHDPE Dimension: 500mm * 500mm * 400mm( LxWxD) Weight: 7kg±0.2kg Bearing capacity: 350 kg/sqm Applications: floating bridge, floating dock, floating restaurant, leisure platform, aquacult. Available colors: orange, blue, black( other color can be customized if big quantity)

Dock Product Catagory Product Characteristics 1.Unlimited Number of Construction The pontoons of the construction can adapt to any specific lakeside residen's needs and can be assembled to correnspond with the shape or size you have in mind. The possible number of construction is unlimited. 2.Fast and Easy to Assemble Only 2 people are needed to put together 50 cubes in a one hour period.The pontoon construction is very simple, blocks held together tightly and filmly with

1: Material: HDPE 2: Floating Unit specifications: 50X50X40cm / Material thickness is 3-5CM 3: Weight: 7 kg ,More or less 4: Water capacity: 370 kg / square meter / 4 floating Units. 5: Affordable tension: 1.8 to 2 t. (Affordable tension for ears of Floating unit) 6: Resistance to general acid-base, solar UV radiation 7: Max. temperature: 190 °C, Min. temperature -50 ° C 8: Environmentally friendly materials. 9: Without thorn or cuts Intentionally,can be used for more than 15

Floating dock, water dock , jet ski dock Specifications 1.Safety: with patterns on the top surface, Modular Float System is free from the dangers caused by slippery surfaces, splinters Applications 1, Marinas, jetty. 2, Jet Ski docks. 3, Drive on docks. 4, Floating work platforms used in industry, communal projects, and navy engineering, etc. 5, Aquatic stages for water shows and activities. 6, Pontoon bridges. 7, Landing for sailors, rowers, water-skiers, surfers or navy

Item No. Specification(mm) Quantity(PCS) Length Width Height 20'GP 40'GP Jet Ski Float 3400mm 1700mm 300mm 9 27 The rotomolding jet ski dock is made of solid polyethylene shell with EPS foam inside.Solid and durable used to lift the jet ski. 1.Material:PE+EPS foam 2.measurement:3.4*1.7*0.3m 3.Function:used for protecting the jet ski from corrosion or algae. 4.Durable,tough,stable,environmentally friendly, resistance to most chemical. 5.Rotational molding one piece design,