Marine cable and marine lights

1.Application: The XLPE insulated shipboard/marine power cable with rated voltage up to and including 0.6/1kV is applicable for all kinds of shipboards and over-water buildings like petrol platform at sea. 2.Operation Properties: Rated voltage of cable;0.6/1kV Continuous permissible operating temperature: 85°C. Min bending radius under installation Metal braid armored type:6D; Non-armored type;4D≤25 6D>25 3.Execution Standard: Type Execution Standard DA Type SA Type SC Type

EPR Insulated Fire-resisting Marine power Cable 0.6/1kv SPECIFICATION & STANDARDS IEC 60288 IEC60092-351 IEC60092-376 IEC60092-359 IEC60332-1 IEC 60331 Construction: 1. Conductor: tinned copper 2. Insulation: EPR 3. Tape 4. Individual screen: tinned copper wire braided 5. Tape 6. Inner sheath: PCP/PO (SHF1, SHF2) 7. Screen/Armored: tinned copper wire braid (Galvanized steel wire braided) 8. Outer sheath: PVC/PO (SHF1, SHF2) Flammability Features: NA: Fire-resisting cable NC

PVC Insulated Shipboard Telecommunication Cable 250V SPECIFICATION & STANDARDS IEC 60288 IEC60092-351 IEC60092-376 IEC60092-359 IEC60332-1 IEC60332-3Cat.A Construction: 1. Conductor: tinned copper 2. Insulation: PVC 3. Tape 4. Individual screen: tinned copper wire braided 5. Tape 6. Inner sheath: PCP/PO (SHF1, SHF2) 7. Screen/Armored: tinned copper wire braid (Galvanized steel wire braided) 8. Outer sheath: PVC/PO (SHF1, SHF2) Flammability Features: DA: Single cable flame

SPECIFICATION & STANDARDS IEC 60288 IEC60092-350 IEC60092-353 IEC60092-359 IEC60092 351 IEC60332-1 IEC60332-3Cat.A IEC61034-2 IEC 60754-2 3A Construction: Conductor: tinned copper Insulation: EPR Filler Tape Inner sheath: PCP/CSP/PVC/PO (SHF1, SHF2) Armored: tinned copper wire braid (Galvanized steel wire braid) Outer sheath: PVC/PO (SHF1, SHF2) Flammability Features: DA: Single cable flame retardant SA: Bunched cable flame retardant SC: Bunched cable flame retardant,halogen

1 Marine cables 2 First-class manufacturer 3 American ABS, German GL&VDE etc. approved 4 Germany TROESTER machine made Charateristic: 1 Rated voltage 0.6/1kv 2 Flame-retardant IEC 60332-1-2 and IEC 60332-3-22 3 DA: test for single insulated wire and cable 4 SA: test for bunched wires and cables 5 NA: Fire-resistant 6 SC: Smoke emission Halogen-free 7 NSC: Fire-resistant Smoke emission Halogen-free 8 Maximum Conductor temperature +85 °C Minimum recommended installation

XLPE insulated ABS Certified Marine Power Cable 0.6/1 kV SPECIFICATION & STANDARDS IEC 60288 IEC60092-350 IEC60092-353 IEC60092-359 IEC60092 351 IEC60332-1 IEC60332-3Cat.A IEC61034-2 IEC 60754-2 3A Construction: Conductor: tinned copper Insulation: EPR Filler Tape Inner sheath: PCP/CSP/PVC/PO (SHF1, SHF2) Armored: tinned copper wire braid (Galvanized steel wire braid) Outer sheath: PVC/PO (SHF1, SHF2) Flammability Features: DA: Single cable flame retardant SA: Bunched cable

0.6/1KV-12/20KV EPR XLPE Marine Cable This cable is used on ships,petrol platforms and offshore buildings for emergency power,light and control system. EPR Fire resistant Marine Cable standards IEC 60092-350 IEC 60092-353 IEC 60332-1-2 IEC 60332-3-22 IEC 67054-1-2 IEC 61034 EPR Fire resistant Marine Cable service condition 1.Rated Voltage:0.6/1(1.2)kV,1.8/3 kV 2.Long term allowable working temperature:90°C 3.Finished Cable can withstand AC 3.5kv/5 minutes without puncture. 4

The scope of application: Applied to the ships with the length 50m or above 50m as lamp signal liaison when night navigation. Characteristics: 1. The shell is made of high-strength engineering plastic PA+GF, the lampshade adopts injection of PC, lens hood adopts good quality stainless steel. 2. The signal lights have the whole seal structure, it is waterproof under the bad environment. 3. The connection of the signal light's lalmp holder and base adopt plug-in type, can

Characteristic: Equipped the sphere toughened glass reflector and the device of focus adjustment which can adjust the focus up and down, front and black neatly. And has the functions such as high luminous intensity, far illumination distance. TZ1 has steel sheel, ball plate mounted on base, also equipped with lifting gear which can control the light body by hand to rotate for 180° horizontally and pitching 30°. Equipped the resistance box when supply DC110V, pleae remark

Characteristic: The shell adopts good quality steel plate tensioned, lampshade adopts injection of PC, and has the seal structure. Plug-in type lamp holder, equipped wiring terminal inside, convenient to connect The lamp equipped B15 lamp holder, used for 24V/15W emergency bulb the edge of lampshade marks the marking, remark clear that need the emergency device when order Equipped compensating capacitance inside the lamp, good effect of start Approved by CCS (China Classifica