M12/CS Lens Mount Holder, IR Cut Filter

Metal M12 Mount Lens Holder MTV Lens Support Spacing Bracket Security CCTV Camera Board Module Screw Adapter Connector: Model: MR-L010D-M Material: Metal Mount: M12*0.5 Spacing Hole: 22mm hole spacing Outer size: 21*21*10mm Remark: 14.2mm height is optional.

Diameter 8MM JB510 Long Wavelength Band Pass Filter/ZAB25/ZB1/QB5/QB23 We created a series of infrared band pass filters ,.We also accept the custom made. JB510 Specification: Diameter:8MM Thickness:2MM Dimension Tolerance:+/-0.15mm Thickness Tolerance: +/-0.15mm Surface Quality: 40-20 Clear Aperture: >90% Other iterms: Part Number Diameter(mm) Thickness (mm) λtj (nm) λ0 (nm) Tλ0 (%) K LOHB600 25.4 2 600 ± 10 680 ≥88.7 ≥1.2 LOHB610 25.4 2 610 ± 10 680 ≥88.7 ≥1.2 LOHB630 25.4

New 7mm M12 mount MTV Lens Extension tube Adapter Ring for M12 X0.5 Board Lens: New 7mm S mount MTV Lens Extension tube Adapter Ring for M12 X0.5 Board Lens Product feature: This is a board lens black-aluminum adapter for all types of CCTV board camera. A 10mm Adapter Ring attaches between a lens and a board camera. If you have a lens on your camera that is too far to make image clear, you need the adapter to put between lens and camera. thread: M12 x 0.5 Material : Metal S

Infrared Filter for CCTV Cameras, 8.8*8.2*2.58mm, 1.08 + 0.6 + 0.75AR(AR coated), Three layers

IR-CUT CS material is all metal daytime color reproduction is good evening infrared effect Unit Type: piece Package Weight: 0.100kg (0.22lb.) Package Size: 15cm x 13cm x 3cm (5.91in x 5.12in x 1.18in)

Infrared Filter for CCTV Cameras

IR CUT Filter Specification-MRC002ICF Performance parameters Product material:Plastic Driving voltage:3.5-12V Driving current:58-207mA Coil impedance:60Ω ± 5% (20℃ Temp) Driving time:

1080P 3.6mm cctv lens + IR CUT Equipment M12 for Full HD CCTV Camera MTV Mount Specification Model MR-C3620IRCW Mount M12*0.5 Focal Length 3.6mm IR Cut Yes Sensor Size 1/3' Iris Fixed Aperture F2.0 Focus Manual Zoom Fixed Angle of View 89° MOD 0.2m Operating Temperature -20°C -- +85°C Remark Metal lens

C/CS mount Switching ring, Silver color, used for cctv lens Material: Aluminum Alloy Mount: CS/C Outer Size: Φ31mm Inner Size: Φ22.2mm Usage: CS interface Thread: 5mm Color: Silver

Locking ring for cctv lenses: Model: MR0252 Outer size: 15.3*2.6mm Inner size: 11.5mm Mount: M12*0.5 Usage: used for cctv lenses

M12 mount Extension Tube, MR1205E When use pinhole lens, and need to replace to general specification of a lens, you will find original height is not enough. Then could use this small lenses circle, eliminates the trouble to add the shedding. Metal material, Total length: 1cm Thread length: 3mm Light body length: 7mm Mount: M12*0.5

M14 mount switch to M12 mount, cctv lens accessoires, MR14F12 Outer diameter: 14mm Inner hole: 8mm Material: plastic-steels

CCTV Lens Holder for camera lens Specification: Material: Plastic Steel, Mount: M12*0.5, Spacing Hole: 20mm hole spacing,

DC M12 lens holder: MR1201HA: M12 lens holder with IR Filter by DC power adjustment.

Model: MR021(Dust proof Cap) Outer Size: Ø29.4*6.7 Inner Size: Ø22*2.3 Material: ABS

Metal Lens Holder/CCTV Camera Holder Specification: Material: Metal Mount: M12*0.5, Spacing Hole: 22mm hole spacing,

Specification: Material: Metal Mount: CS Outer Size: Φ31mm Inner Size: Φ22.2mm Usage: CS interface

CCTV lens holder Specification: Material: Metal Mount: CS Spacing Hole: 20mm Outer Size: Φ28.7*14.5mm Inner Size: Φ24.5mm Usage: CS Lens holder

CCTV lens holder Specification: Material: Metal Mount: CS Spacing Hole: 24.9mm Outer Size: Φ29*15.4mm Inner Size: Φ24.6mm Usage: CS Lens holder

CCTV Lens Holder for camera lens Specification: Material: Metal Mount: CS Spacing Hole: 25.5mm Outer Size: Φ28.9*14.1mm Inner Size: Φ24.5mm Usage: CS Lens holder