Custom amorphous and nanocrystalline cores

Toroidal amorphous gap cores for hall sensor Features Material: Fe-based amorphous core Saturation flux density induction: 1.56T Curie temperature(℃): 410 Stacking factor: >0.8 Saturation magnetostriction(*10^-6): Solar inverter filter > PFC choke > Midium frequency transformer > Diffrental mode choke > Output filter > Audio transformer Standard core dimensions Part No. Core dimensions Effictive cross section Mean path length Weight A B C D E F AFe lFe mFe mm mm mm mm mm mm

PFC choke amorphous metglas c cores amcc-100 Features Material: Fe-based amorphous core Saturation flux density induction: 1.56T Curie temperature(℃): 410 Stacking factor: >0.8 Saturation magnetostriction(*10^-6): Solar inverter filter > PFC choke > Midium frequency transformer > Diffrental mode choke > Output filter > Audio transformer Standard core dimensions Part No. Core dimensions Effictive cross section Mean path length Weight A B C D E F AFe lFe mFe mm mm mm mm mm mm

Nanocrystalline Bead Cores for ADSL Network filters Epoxy Coating High Performance Nanocrystalline Core for EMC Common Mode Choke Bare core dimensions: OD: 4.0mm ID: 2mm HT: 3mm Finished core dimensions (approximately): OD: 4.3mm ID: 1.8mm HT:3.4mm Color: Blue AL Value @ 10KHz, 0.25V : 12.5uH Min Mainly use for ADSL Network Filter or noise suppresor for MosFET It is very excellent for common mode choke for replace ferrite core or tranditional core.

Nanocrystalline Bead Cores for ADSL Network filters Epoxy Coating High Performance Nanocrystalline Core for EMC Common Mode Choke Bare core dimensions: OD: 4.0mm ID: 2mm HT: 3mm Finished core dimensions (approximately): OD: 4.3mm ID: 1.8mm HT:3.4mm Color: Blue AL Value @ 10KHz, 0.25V : 12.5uH Min Mainly use for ADSL Network Filter or noise suppresor for MosFET It is very excellent for common mode choke for replace ferrite core or tranditional core.

Nanocrystalline Cores for Common Mode Chokes Thanks for the development of amorphous and nanocrystalline technology, which is a very important technology in modem magnetic materials, cores and inductive components. King Magnetics has developed series of nanocrystalline cores for common mode chokes. Nanocrystalline cores have very high permeability over low frequency to high frequency up to 30Mhz. They are very suitable for common mode choke to used as EMC filter to compress

Nanocrystalline Core for Common Mode Choke Thanks for the development of amorphous and nanocrystalline technology, which is a very important technology in modem magnetic materials, cores and inductive components. King Magnetics has developed series of nanocrystalline cores for common mode chokes. Nanocrystalline cores have very high permeability over low frequency to high frequency up to 30Mhz. They are very suitable for common mode choke to used as EMC filter to compress

Nanocrystalline Bead Core with Epoxy Coating for Network Communication or Spike killer Bare core dimensions: OD: 3.9mm ID: 2.2mm HT: 3.0mm Finished core dimensions (approximately): OD: 4.3mm ID: 2.0mm HT:3.3mm Color: Blue AL Value @ 10KHz, 0.25V : 10uH Min It is very excellent for common mode choke for replace ferrite core or tranditional core.

Epoxy Coating High Performance Nanocrystalline Core for EMC Common Mode Choke Bare core dimensions: OD: 30mm ID: 20mm HT: 10mm Finished core dimensions (approximately): OD: 31mm ID: 29mm HT:11mm Color: Blue AL Value @ 10KHz, 0.25V : 50uH Min AL Value @ 100KHz, 0.25V : 9uH Min It is very excellent for common mode choke for replace ferrite core or tranditional core. More Details Please visit: www.kingmagnetics.com

Nanocrystalline Core for Common Mode Choke Thanks for the development of amorphous and nanocrystalline technology, which is a very important technology in modem magnetic materials, cores and inductive components. King Magnetics has developed series of nanocrystalline cores for common mode chokes. Nanocrystalline cores have very high permeability over low frequency to high frequency up to 30Mhz. They are very suitable for common mode choke to used as EMC filter to compress

High permeability ui 80000 Nanocrystalline Core updated product for EMC Filter Common Mode Choke 3- Phase disign, with seperated board. Bare core dimensions: OD: 52mm ID: 36mm HT: 25mm Finished core dimensions (approximately): OD: 55.6mm ID: 32.6mm HT:28.6mm Color: White or other (custom design) AL Value @ 10KHz, 0.25V : 75uH Min Or you can specified other AL value for other frequency condition. Long time Working temperature: -40℃ - 120℃ RoHS Compliance, UL94-V0 for plastic

High permeability ui 80000 Nanocrystalline Core updated product for EMC Filter Common Mode Choke 3- Phase disign, with seperated board. Bare core dimensions: OD: 52mm ID: 36mm HT: 25mm Finished core dimensions (approximately): OD: 55.6mm ID: 32.6mm HT:28.6mm Color: White or other (custom design) AL Value @ 10KHz, 0.25V : 75uH Min Or you can specified other AL value for other frequency condition. Long time Working temperature: -40℃ - 120℃ RoHS Compliance, UL94-V0 for plastic

High permeability ui 80000 Nanocrystalline Core updated product for EMC Filter Common Mode Choke 3- Phase disign, with seperated board. Bare core dimensions: OD: 52mm ID: 36mm HT: 25mm Finished core dimensions (approximately): OD: 55.6mm ID: 32.6mm HT:28.6mm Color: White or other (custom design) AL Value @ 10KHz, 0.25V : 75uH Min Or you can specified other AL value for other frequency condition. Long time Working temperature: -40℃ - 120℃ RoHS Compliance, UL94-V0 for plastic

Nanocrystalline Core for Common Mode Choke Thanks for the development of amorphous and nanocrystalline technology, which is a very important technology in modem magnetic materials, cores and inductive components. King Magnetics has developed series of nanocrystalline cores for common mode chokes. Nanocrystalline cores have very high permeability over low frequency to high frequency up to 30Mhz. They are very suitable for common mode choke to used as EMC filter to compress

Epoxy Coating High Performance Nanocrystalline Core for EMC Common Mode Choke Bare core dimensions: OD: 30mm ID: 20mm HT: 10mm Finished core dimensions (approximately): OD: 31mm ID: 29mm HT:11mm Color: Blue AL Value @ 10KHz, 0.25V : 50uH Min AL Value @ 100KHz, 0.25V : 9uH Min It is very excellent for common mode choke for replace ferrite core or tranditional core.

Nanocrystalline Core for Common Mode Choke Thanks for the development of amorphous and nanocrystalline technology, which is a very important technology in modem magnetic materials, cores and inductive components. King Magnetics has developed series of nanocrystalline cores for common mode chokes. Nanocrystalline cores have very high permeability over low frequency to high frequency up to 30Mhz. They are very suitable for common mode choke to used as EMC filter to compress

Nanocrystalline Toroidal Cores for Common Mode Chokes We use the best nanocrystalline ribbons to product the cores. features: High permeability means High indutance, High saturation flux density Low core loss Very good temperature characteristic. easy help you treat EMI problems. Green product, low carbon and RoHS compliance. King Magnetics is a professional producer of amorphous core and nanocrystalline core. Custom made cores are available. Model: N40x25x15 Nanocrystalline

Nanocrystalline Core for Common Mode Choke Thanks for the development of amorphous and nanocrystalline technology, which is a very important technology in modem magnetic materials, cores and inductive components. King Magnetics has developed series of nanocrystalline cores for common mode chokes. Nanocrystalline cores have very high permeability over low frequency to high frequency up to 30Mhz. They are very suitable for common mode choke to used as EMC filter to compress

Nanocrystalline Core for Common Mode Choke Thanks for the development of amorphous and nanocrystalline technology, which is a very important technology in modem magnetic materials, cores and inductive components. King Magnetics has developed series of nanocrystalline cores for common mode chokes. Nanocrystalline cores have very high permeability over low frequency to high frequency up to 30Mhz. They are very suitable for common mode choke to used as EMC filter to compress

Nanocrystalline Core for Common Mode Choke Thanks for the development of amorphous and nanocrystalline technology, which is a very important technology in modem magnetic materials, cores and inductive components. King Magnetics has developed series of nanocrystalline cores for common mode chokes. Nanocrystalline cores have very high permeability over low frequency to high frequency up to 30Mhz. They are very suitable for common mode choke to used as EMC filter to compress

Nanocrystalline Core for Common Mode Choke Thanks for the development of amorphous and nanocrystalline technology, which is a very important technology in modem magnetic materials, cores and inductive components. King Magnetics has developed series of nanocrystalline cores for common mode chokes. Nanocrystalline cores have very high permeability over low frequency to high frequency up to 30Mhz. They are very suitable for common mode choke to used as EMC filter to compress