lead acid battery machinery

Usages:Mainly used in casting the positive spine of Tube-kind lead acid battery,with low antimony content(less than 3%) Composition:Host,Lead pot,Electric panel,Mould Spec&Parameter: Parameter Type spine length(mm) Spine Diameter Lead pot(T) Power(KW) Production Ability WF-300 ≤300 ≥1.8 1 45 4-6 WF-500 ≤500 ≥3.2 1 45 3-4 WF-700 ≤680 ≥3.2 1 53 3-4

Briefing: This machine is designed according to Type 40C Waltz US and is also improved for casting lead & calcium alloys better. Technical specifications: 380V±10%, 50Hz, Power (A. Main machine: 0.75KW, B. Lead pump: 0.75KW, D. Lead pan: 42KW). Total power: 44.6 KW. Tap water 2KG/cm2 used for cooling moulds, transition plates, and cutting moulds. The cooling water will return to a down water tank after use. Operating capacity: may cast 8 to 16 pieces of large sealed batteries

Application:Used for any kind of plates.Especially the positive plates. Composition:Upper cone hopper;Small Vibrator;Sensors;Big vibrator;Host;Electric Panel;Lead powder Conveyor; Features: 1)Can use simple panel or plc to control the whole system; 2)The vibration can be adjustable. 3) The system operation is safe, stable and reliable with simple maintenance. 4) The noise and dust emissions are in line with national standards 5) Production capacity:about 80—120pcs/per time!

Application:Used for any kind of plates.Especially the positive plates. Composition:Upper cone hopper;Small Vibrator;Sensors;Big vibrator;Host;Electric Panel;Lead powder Conveyor; Features: 1)Can use simple panel or plc to control the whole system; 2)The vibration can be adjustable. 3) The system operation is safe, stable and reliable with simple maintenance. 4) The noise and dust emissions are in line with national standards 5) Production capacity:about 80—120pcs/per time!

Application:Used for any kind of plates.Especially the positive plates. Composition:Upper cone hopper;Small Vibrator;Sensors;Big vibrator;Host;Electric Panel;Lead powder Conveyor; Features: 1)Can use simple panel or plc to control the whole system; 2)The vibration can be adjustable. 3) The system operation is safe, stable and reliable with simple maintenance. 4) The noise and dust emissions are in line with national standards 5) Production capacity:about 80—120pcs/per time!

Application:Used for any kind of plates.Especially the positive plates. Composition:Upper cone hopper;Small Vibrator;Sensors;Big vibrator;Host;Electric Panel;Lead powder Conveyor; Features: 1)Can use simple panel or plc to control the whole system; 2)The vibration can be adjustable. 3) The system operation is safe, stable and reliable with simple maintenance. 4) The noise and dust emissions are in line with national standards 5) Production capacity:about 80—120pcs/per time!

Tubular gauntlets used for tubular lead acid battery production,industrial battery,.tricycle battery,electric car,golf car battery production use. 1.Characteristic 1.1Color: Natural white 1.2Resin coating: Acrylic resin o. 1.3Fabric structure: the composition of the tube wall is: yarns per cm. (Crosswise) 17 yarns per cm. (lengthwise) 21.7 23 (300d ~285d) 26 (300d ~285d) 1.4Wall thickness of the tube 0.3mm 2.Standard Sizes 2.1Standard internal diameter 6.0 – 9.0 mm 2.2Number

Briefing: This machine is designed according to Type 40C Waltz US and is also improved for casting lead & calcium alloys better. Technical specifications: 380V±10%, 50Hz, Power (A. Main machine: 0.75KW, B. Lead pump: 0.75KW, D. Lead pan: 42KW). Total power: 44.6 KW. Tap water 2KG/cm2 used for cooling moulds, transition plates, and cutting moulds. The cooling water will return to a down water tank after use. Operating capacity: may cast 8 to 16 pieces of large sealed batteries

Briefing: This machine is designed according to Type 40C Waltz US and is also improved for casting lead & calcium alloys better. Technical specifications: 380V±10%, 50Hz, Power (A. Main machine: 0.75KW, B. Lead pump: 0.75KW, D. Lead pan: 42KW). Total power: 44.6 KW. Tap water 2KG/cm2 used for cooling moulds, transition plates, and cutting moulds. The cooling water will return to a down water tank after use. Operating capacity: may cast 8 to 16 pieces of large sealed batteries

Briefing: This machine is designed according to Type 40C Waltz US and is also improved for casting lead & calcium alloys better. Technical specifications: 380V±10%, 50Hz, Power (A. Main machine: 0.75KW, B. Lead pump: 0.75KW, D. Lead pan: 42KW). Total power: 44.6 KW. Tap water 2KG/cm2 used for cooling moulds, transition plates, and cutting moulds. The cooling water will return to a down water tank after use. Operating capacity: may cast 8 to 16 pieces of large sealed batteries

Briefing: This machine is designed according to Type 40C Waltz US and is also improved for casting lead & calcium alloys better. Technical specifications: 380V±10%, 50Hz, Power (A. Main machine: 0.75KW, B. Lead pump: 0.75KW, D. Lead pan: 42KW). Total power: 44.6 KW. Tap water 2KG/cm2 used for cooling moulds, transition plates, and cutting moulds. The cooling water will return to a down water tank after use. Operating capacity: may cast 8 to 16 pieces of large sealed batteries

Briefing: This machine is designed according to Type 40C Waltz US and is also improved for casting lead & calcium alloys better. Technical specifications: 380V±10%, 50Hz, Power (A. Main machine: 0.75KW, B. Lead pump: 0.75KW, D. Lead pan: 42KW). Total power: 44.6 KW. Tap water 2KG/cm2 used for cooling moulds, transition plates, and cutting moulds. The cooling water will return to a down water tank after use. Operating capacity: may cast 8 to 16 pieces of large sealed batteries

The WFT double sided pasting machine developed by our company. Owing to its good double side effects, the machine has become a key equipment for VRLA battery makers. The advantage of double- side pasting machine comparing with single-side pasting machine: ----No grid wires exposure, therefore less grid corrosion ----Same amount of paste on both sides, hence no deformation in and less active material shedding in formation ----Controlled paste feeding, plate weight and

The WFT double sided pasting machine developed by our company. Owing to its good double side effects, the machine has become a key equipment for VRLA battery makers. The advantage of double- side pasting machine comparing with single-side pasting machine: ----No grid wires exposure, therefore less grid corrosion ----Same amount of paste on both sides, hence no deformation in and less active material shedding in formation ----Controlled paste feeding, plate weight and

Application:Used for any kind of plates.Especially the positive plates. Composition:Upper cone hopper;Small Vibrator;Sensors;Big vibrator;Host;Electric Panel;Lead powder Conveyor; Features: 1)Can use simple panel or plc to control the whole system; 2)The vibration can be adjustable. 3) The system operation is safe, stable and reliable with simple maintenance. 4) The noise and dust emissions are in line with national standards 5) Production capacity:about 80—120pcs/per time!

Application: 28-200 Ah common/maintenance-free storage batteries batch assembly and test on line; Features: Input/output of battery on single unit running along is operated manually and the rest is totally computer controlled. Output: 100-180pcs/hour (The following machinery all meets this output standard.) Power Supply: AC380V,120KW； Air Supply: 1.5m3/min,0.6Mpa； Color: Blue or customized A pair of moulds attached to each machine are available with specifications of battery

Briefing: This machine is designed according to Type 40C Waltz US and is also improved for casting lead & calcium alloys better. Technical specifications: 380V±10%, 50Hz, Power (A. Main machine: 0.75KW, B. Lead pump: 0.75KW, D. Lead pan: 42KW). Total power: 44.6 KW. Tap water 2KG/cm2 used for cooling moulds, transition plates, and cutting moulds. The cooling water will return to a down water tank after use. Operating capacity: may cast 8 to 16 pieces of large sealed batteries

Application: 28-200 Ah common/maintenance-free storage batteries batch assembly and test on line; Features: Input/output of battery on single unit running along is operated manually and the rest is totally computer controlled. Output: 100-180pcs/hour (The following machinery all meets this output standard.) Power Supply: AC380V,120KW； Air Supply: 1.5m3/min,0.6Mpa； Color: Blue or customized A pair of moulds attached to each machine are available with specifications of battery

Usages:Mainly used in casting the positive spine of Tube-kind lead acid battery,with low antimony content(less than 3%) Composition:Host,Lead pot,Electric panel,Mould Spec&Parameter: Parameter Type spine length(mm) Spine Diameter Lead pot(T) Power(KW) Production Ability WF-300 ≤300 ≥1.8 1 45 4-6 WF-500 ≤500 ≥3.2 1 45 3-4 WF-700 ≤680 ≥3.2 1 53 3-4

Application:Used for any kind of plates.Especially the positive plates. Composition:Upper cone hopper;Small Vibrator;Sensors;Big vibrator;Host;Electric Panel;Lead powder Conveyor; Features: 1)Can use simple panel or plc to control the whole system; 2)The vibration can be adjustable. 3) The system operation is safe, stable and reliable with simple maintenance. 4) The noise and dust emissions are in line with national standards 5) Production capacity:about 80—120pcs/per time!