drilling fluid instrument

specification: Parameter: Rated Frequency:AC220V±5%; 50Hz Power:1.5KW The highest operating Temperature:232℃ The highest working pressure:8.0MPa Maximum back pressure:3.5MPa Effective filtration area:22.6cm2 Liquid cup Capacity:500ml Air source: Nitrogen (without oil, water and other impurity) Size:300×280×650/720×440×340 Weight :41.8Kg/34 Service: 1. Warranty 1 year of replacement and return. 1, Providing factory visit and study, technical training 2, 24-hour technical

Application: NP-03 multiple intelligent swell capacity test instrument is mainly used to test clay shale’s swelling change condition in a range of temperature( normal temperature -93℃). specification: Model Name Configuration NP-03 Multiple intelligent swell capacity test instrument Four test cup Name Technical parameters Rated Frequency 230V±10% 50/60Hz Heating power 500W Magnetic stirring speed 100~2000r/min Operating Temperature ≤88℃ Constant temperature error ±5℃ Range 0

Application: HPHT Curing Autoclave is designed to prepare testing cement sample in accordance with API test procedures. specification: Parameter: The highest operating Temperature:370℃ The highest working pressure:41MPa The number of samples:16pieces Input pressure:AC220V±5%; 50Hz Input power:9.5KW Power of heater:9KW Environment working temperature:0-50℃ Compressed air:700KPa Cooling water pressure:600KPa Size:105×92×190cm Weight :296kg Service: 1. Warranty 1 year of

Application: Drilling fluid plugging property evaluation instrument is a special equipment to test drilling fluid permeability and plugging property. It is improved from 500ml HPHT filter press, which can be used indoors or outdoors. In the heating process, it can do filter test without interference of precipitation particles. It can show how drilling fluid forms low-permeability filter cakes sealing loss and can stop pressure differential sticking. specification: Name

Application: HPHT sticking tester GNF-1 is a imitative and multi-functional experiment analysis equipment which is mainly used to monitor coefficient of friction resistance between drilling tool in deep well and side well drilling fluid to deal with drilling fluid, improve lubricating property, prevent pipe sticking and provide correct and reliable data for a safe drilling. It can measure filter loss and filter cake’s sticking property in normal temperature and middle

Application: Under pressure difference, drilling fluid will have filter effect, which means free water of drilling fluid permeate to gaps and pores of rocks on side wall. Filter press is used to simulate drilling fluid’s filtration and cake’s forming characteristics under static condition. SD4 filter press with many cups can do multi-samples paralleled experiments. It equips aluminium drilling fluid glass, rated working pressure 0.69MPa, effective filtration area 45.6cm2,

Application: Permeability plugging drilling fluid filter press FA-BX is designed to observe drilling fluid’s filtration and permeation. With the sand filter bed and drilling fluid, then cover the lid, it can be used to observe fluid permeation in transparent barrel under air source pressure. It is widely used in various oil field, geological survey and drilling fluid’s analysis and testing. FA-BX’s barrel is made of high strength transparent materials which has compression

ZNS-5MP Filter press with API standard drilling fluid cup Application: Under pressure difference, drilling fluid will have filter effect, which means free water of drilling fluid permeate to gaps and pores of rocks on side wall. Filter press is used to simulate drilling fluid’s filtration and cake’s forming characteristics under static condition. SD3 filter press with many cups can do multi-samples paralleled experiments. It equips aluminium drilling fluid glass, rated

Application: Atmospheric consistometer is designed to test oil well cement thickening time and preparing cement slurry according to American API Specifications. It’s applicable to oil well cement research, cement additive research and test, cement quality testing and research rooms and field labs of every oil well service company. specification: Name Technical parameters Consistency range 0~100 Bc Greatest pressure Atmospheric pressure Maximum temperature 930C (2000F) Rotate

Application: MLN Marsh funnel viscometer is a common instrument used for measure drilling fluid’s relative viscosity(compared with water) produced in accordance with API. Viscosity and gel strength are all related to fluid’s flow quality. It has been used for many years in this field. Its standard : 946ml standard distilled water is 26±5S in 20±2℃. HaiTongDa funnel viscometer is produced by sturdy and durable materials which can guarantee measurement accuracy. We design three

Application: HPHT filter press is an equipment which can simulate deep well to test filter loss of drilling fluid or cement slurry in high temperature and high pressure. Pressure and temperature have an important impact on controlling filtering fluid. So, HPHT filter loss testing is an important target in drilling fluid control technology. HPHT filter press is designed according to API, which has high accuracy, little repetitive error, easy operation and precise testing data.

Application: ZNN-D6 is manufactured to test rheological parameters in accordance with API. It can measure various rheological parameters. Draw rheological diagram according to multi-point measurement value, determine fluid model of liquid in the flow process, then select suitable formula and measure non-Newtonian fluid model. Meanwhile, it can test yield point, gel strength, consistency coefficient and flow behavior index and so on. The instrument applies to research and

Application: 7720 has compact design, heats and pressurizes rapidly. Cylindrical slurry cup and fixed mixer are assembled together and put in pressure autoclave. Maximum working pressure is 137 Mpa (20,000psi). Maximum temperature is 204°C(400°F). Air-Driven Hydraulic Pump provides pressure to autoclave. Hydraulic pressure system is composed to fuel tank, piping system, valve and filters.Heat the autoclave through 3000w build-in pipe heater.Programmable temperature controller

Application: Constant-speed Blender is used to test oil well cement and prepare cement slurry. It is newly developed product of our company and adopt latest technology, changes traditional mechanic adjustment way, adopts single machine control. Compared to traditional machine, it has good merits of convenient application, easy operation, high control accuracy. And it adopts high-class exported motor with low noise, high rotary speed and good stability property. specification:

Application: Digital display Mud density balance is a modern density measurement instrument compared with traditional mechanical measurement liquid density and electric intelligent sensor which can read out density directly. YMS can collect data through pressure sensor which are converted through micro processor control program and then liquid density is displayed on the monitor. It has large measurement range, easy operation and convenient application. It avoids measurement

Application: Drilling fluid plugging property evaluation instrument is a special equipment to test drilling fluid permeability and plugging property. It is improved from 500ml HPHT filter press, which can be used indoors or outdoors. In the heating process, it can do filter test without interference of precipitation particles. It can show how drilling fluid forms low-permeability filter cakes sealing loss and can stop pressure differential sticking. specification: Name

Application: HPHT Curing Autoclave is designed to prepare testing cement sample in accordance with API test procedures. specification: Parameter: The highest operating Temperature:370℃ The highest working pressure:41MPa The number of samples:16pieces Input pressure:AC220V±5%; 50Hz Input power:9.5KW Power of heater:9KW Environment working temperature:0-50℃ Compressed air:700KPa Cooling water pressure:600KPa Size:105×92×190cm Weight :296kg Service: 1. Warranty 1 year of

Application: NP-03 multiple intelligent swell capacity test instrument is mainly used to test clay shale’s swelling change condition in a range of temperature( normal temperature -93℃). specification: Model Name Configuration NP-03 Multiple intelligent swell capacity test instrument Four test cup Name Technical parameters Rated Frequency 230V±10% 50/60Hz Heating power 500W Magnetic stirring speed 100~2000r/min Operating Temperature ≤88℃ Constant temperature error ±5℃ Range 0

Application: HPHT Clay Shale Swell Meter (double) HTP-2A can simulate down hole temperature and pressure difference, test clay shale’s water swell property. It provides advanced testing ways for stable research for oil drilling sidewall, evaluate and choose anti-collapse drilling fluid formulation. HPT-2A uses computers to gather data, improve data accuracy and make the property more stable, Measurement range larger. It applies to HPHT and NPT. It is used in oil exploration

Application: Electric rotational viscometer is designed according to API specification. The device works by a synchronous belt driving two synchronous pulley. Compared with traditional drive shaft, it reduces the fault point and makes structure more rational. specification: Model Name Remarks ZNN-D6B Electric Rotational Viscometer F1 Torsion spring measuring assembly/ F0.2 Torsion spring measuring assembly(Optional accessories) Name Technical parameters Rated Frequency 110V