Industrial Aluminum Foil

Aluminium fin stcok for airconditioner 8011 H22 or H24 plain Application: Fin, AirconditionerThickness:0.085-0.3Surface: Mill finishProcess: Final annealing H22 H24Material: Aluminium foilType: Fin stock The technology controlduring production: Normative referenced documentThe provision of the following documents, through the reference of this standard becomes the provision of this standard. All subsequent amendment (excluding the correction of the content) of the dated

Aluminium Foil for Lithium battery 1235 H18 one side bright ID 6' Application: Battery Thickness: 0.012-0.02 Alloy: 1235 Temper: H18 Tensile strength: 180-220 Mpa Elogation:1.5-4.5% Property Control: I Chemical Composition of battery aluminum foil Alloy Max. % Si Fe Cu Mn Mg Cr Ni Zn Ti Others Al Each Total 1050 0.25 0.40 0.05 0.05 0.05 0.05 0.05V 0.03 0.03 99.5 1060 0.25 0.35 0.05 0.03 0.03 0.05 0.05V 0.03 0.03 99.6 1070 0.20 0.25 0.04 0.03 0.03 0.04 0.05V 0.03 0.03 99.7

Aluminium Foil for cable 8011 O one side bright ID 76 or 152.4 Temper: Full soft Surface: One side bright or two sides bright Usage: Cable of different kind Wettability: A or B Color: Silver Substance: Aluminium foil Specific technology management: 1 ALLOY AND TEMPER Alloy and temper should correspond to Table 1. Table 1 Alloy Temper 8011 O 2 SPECIFICATION AND TOLERANCE The specification is as below Table 2. Table 2 Gauge mm Gauge Tolerance mm Width mm Width Tolerance mm ID

Aluminium Foil for cable 1235 O two sides bright ID152.4 Application: Cable Thickness: 0.00635-0.02 Alloy: 1235 Temper: O One side bright or two sides bright Width: 200-1400 Material: Aluminium foil Technician process and standard This specification covers 8011, 1235 or 1145 alloy foil master rolls for cable foil and describes the quality attributes of the master foil rolls. Among the cable foils, it covers video cable foil when the thickness is 0.009mm- 0.012mm and 0.04mm -0

Adhesive tape Aluminium foil roll 8011 O one side bright ID 152.4 made in China Application: Tape Gauge: 0.012-2 Temper: Soft Surface: Mill finish One side bright or two sides bright Color: Pure metal color Delivery and packaging Packaging Details: fumigation wooden case, with drying agent and plastic film inside of te case, sea worthy packing Delivery Detail: 35 days after receiving the downpayment Hangzhou Dilly family Aluminum foil technology CO., Ltd is an exporter for

Insulation heavy gauge aluminium foil 8011 O two sides bright ID 152.4 Application: Insulation foil Thickness: 0.025-0.3 Alloy: 8011 Temper: O One side bright or two sides bright Width: 200-1400 Material: Aluminium foil Packaging Packaging Details: 1). Each coil to be securely tied with two bands. 2). the contact points of these bands on the coil edge to be protect with edge protectors. 3). Coil then to be properly wrapped with plastic film ,woven belt, resistant paper. 4).

Aluminium Foil for insulation 1235 O 0.006-0.025 thick one side bright Application: Insulation foil Thickness: 0.00635-0.025 Alloy: 1235 Temper: O One side bright or two sides bright Width: 200-1400 Material: Aluminium foil 1 The Alloy ,Temper ,Mechanical performance should comply the subsequent table. Alloy Temper Mechanical performance Tensile (σb, Mpa) Elongation(δ,% ) Gauge mm 1235 O ≥50.0 ≥1.0 0.00635-0.020 1100 2 The specification and corresponding tolerance shall

Aluminium Foil for roofing 8011 O one side bright or two sides bright ID 3' or 6' Application: roofing Mill finish Origin: China Color: Plain Aluminium color One side bright or two sides bright Thickness: 0.012-0.5 Alloy: 8011 Temper: O Width: 200-1400 ps aluminum coils description: alloy temper thickness width(sheets& coils) length(sheets) 8011 O/h24/h14 0.4-1.2mm 940-1000mm varied Packing & Payment Terms FOB Price USD2400-4100 /T MOQ 5T Packing Waterproof wooden ,carton