gate valve

816-F (DIN) Ductile iron resilient seat NRS gate valve 1. Conforms to DIN3352 2. Flanges dimensions conform to DIN2532/2533 ＆EN1092 3. Face to face dimensions conform to DIN3202 f4/f5 4. Nominal pressure: 1.6mpa 5. Shell test pressure: 2.4mpa 6. Sealing test pressure: 1.76mpa 7. Suitable medium: water

816-F (DIN) Ductile iron resilient seat NRS gate valve 1. Conforms to DIN3352 2. Flanges dimensions conform to DIN2532/2533 ＆EN1092 3. Face to face dimensions conform to DIN3202 f4/f5 4. Nominal pressure: 1.6mpa 5. Shell test pressure: 2.4mpa 6. Sealing test pressure: 1.76mpa 7. Suitable medium: water

816-F (DIN) Ductile iron resilient seat NRS gate valve 1. Conforms to DIN3352 2. Flanges dimensions conform to DIN2532/2533 ＆EN1092 3. Face to face dimensions conform to DIN3202 f4/f5 4. Nominal pressure: 1.6mpa 5. Shell test pressure: 2.4mpa 6. Sealing test pressure: 1.76mpa 7. Suitable medium: water

502-F (ANSI) Cast Iron NRS Gate Valve 1. Design and Manufacture Conform to MSS SP-70 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Testing Conform to MSS SP-70 5. It can be equipped with open and close position indicator. 6. It can be operated with bevel gear according to customer’s requirement. 7. It can be operated with wrench head according to customer’s requirement. 8. Suitable media: water, oil, gas

516-F (ANSI) Cast Iron Gate Valve(NRS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

516-F (ANSI) Cast Iron Gate Valve(NRS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

516-F (ANSI) Cast Iron Gate Valve(NRS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

515-F (ANSI) Cast Iron Gate Valve(RS) 1. Design and Manufacture Conform to AWWA C509 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All valve surfaces shall be painted with Epoxy resin paint. 6. It can be operated with wrench head according to customer’s requirement.

501-F (ANSI) Cast Iron OS&Y Gate Valve 1. Design and Manufacture Conform to MSS SP-70 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Testing Conform to MSS SP-70 5. It can be operated with bevel gear according to customer’s requirement. 6. Suitable media: water, oil, gas

501-F (ANSI) Cast Iron OS&Y Gate Valve 1. Design and Manufacture Conform to MSS SP-70 2. Flange dimensions Conform to ANSI B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Testing Conform to MSS SP-70 5. It can be operated with bevel gear according to customer’s requirement. 6. Suitable media: water, oil, gas