Super Austenitic stainless steel

General introduction of 253MA: 253mA was developed over 30 years ago when the need for a heat resistant stainless steel with high strength, while maintaining good oxidation resistance was present in the industry The leaner nickel content of 253mA was not as significant of a development then as it is now With nickel prices fluctuating more than ever before and higher than they have ever been, the lean 11% nickel content of RA 253mA is a key contributor to being cost effective

Equal China grade 00Cr18Ni14Mo3 Features 316LVM material has been used for permanent implants for many years The corrosion resistance in the annealed condition is good Many studies for new alloys use 316LVM as a reference This stainless steel has good ductility in the cold worked condition Applications Suture wire, orthopedic cables, skin closure staples, catheters, stylets, bone pins and many small machined parts

AL-6XN/ UNS N08367 stainless steel pipe seamless or welded China origin with good price AL-6XN overview: AL-6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL-6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion

Equal grade: XM-19, UNS S20910 Nitronic 50 stainless steel, also known as UNS S20910 and XM-19, is an austenitic stainless steel with a blend of strength and corrosion resistance that is better than Stainless Steels 316, 316/316L, 317, and 317/317L Nitronic 50 has twice the yield strength at room temperature compared to Stainless Steels 316/316L and 317/317L. Additionally, it has good mechanical properties at elevated and sub-zero temperatures. Other characteristics that set

310s stainless steel pipe The feature of stainless steel seamless pipe we supply is big diameter, big wall thickness, high quality and fast delivery Max O.D. of stainless steel seamless pipe is 1200mm Max wall thickness we could supply is 70mm Standards: ASTM, ASME, JIS, GOST, EN, DIN, GB and more Grades available: 304, 304L, 316, 316L, 317, 317L, 321, 321H, 310S, 347, 347H, 904L, 2205, 2507, hastelloy C276, Monel 400, inconel 600, incoloy 800, incoloy 800H/HT, alloy 28, UNS

Huaan International supplies 304 thick wall seamless pipe, with O.D. up to 1000mm and wall thickness up to 60mm The pipes could be produced according to EN, GB, GOST, ASME, ASTM standards and third party inspection from BV//TUV and so on are welcome We cound make packing according to the requirements of customers. You can choose: Wooven bag Wooden crate Wooden case with steel angle bar protected on the edges

Thin wall stainless steel seamless pipe with thickness 0.08-0.3mm Tianjin Huaan International is ready to provide high quality and cost effective stainless steel seamless pipe to customers from worldwide We supply thin wall seamless pipe with O.D. 7-80mm and wall thickness 0.08-0.3mm We could supply stainless steel seamless pipe with large diameter up to 1000mm and wall thickness up to 60mm Furthermore, we could supply stainless steel capillary with min O.D. of 0.2mm, and the

Alloy 330 /UNS N08330 stainless steel pipe Alloy 330 is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock Carburization and oxidation resistance to 2100°F (1148°C) are enhanced by a nominal 1.25% silicone addition Incoloy 330 finds wide application in high temperature industrial environments where good resistance to the combined effects of carburization and thermal

API Spec 5LC CRA stainless steel pipe Specification: API spec 5LC(R2006) Specification for CRA Line Pipe Grades: LC30-1812(UNS S31603 or S31653) 316L 316LN LC52-1200(UNS S41008) 410S LC65-2205(UNS S31803) 2205 duplex stainless steel LC65-2506(UNS S31260) LC30-2242(UNS N08825)Incoloy 825 Our advantages: Certificated by API Rich experience of supplement of API 5LC pipes Nice packing Competitive prices Fast delivery Small MOQ: 200kg Third party inspection

347H stainless steel pipe with TUV/LR//BV certificates The feature of stainless steel seamless pipe we supply is big diameter, big wall thickness, high quality and fast delivery Max O.D. of stainless steel seamless pipe is 1200mm Max wall thickness we could supply is 70mm Standards: ASTM, ASME, JIS, GOST, EN, DIN, GB and more Grades available: 304, 304L, 316, 316L, 317, 317L, 321, 321H, 310S, 347, 347H, 904L, 2205, 2507, hastelloy C276, Monel 400, Inconel 600, incoloy 800,

X5CrNi18-10 /1.4301 stainless steel plate hot rolled X5CrNi18-10: Stainless steel types 1.4301 and 1.4307 are also known as grades 304 and 304L respectively. Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel We could supply X5CrNi18-10 stainless steel plate with thickness from 3mm up to 100mm All the plates are

301 (UNS S30100) stainless steel round bar, bright finish or black finish Introduction: 301 stainless steel is an austenitic chromium-nickel stainless steel that provides high strength and good ductility when cold worked It is a modification of type 302 in which the chromium and nickel contents are lowered to increase the cold work-hardening range. This permits higher tensile strengths to be achieved by rolling with a lower loss of ductility than with type 302 The grade is

201 (UNS S20100) stainless steel round bar Introduction of 201 stainless steel 201 stainless steel is an austenitic chromium-nickel-manganese stainless steel that was developed originally to conserve nickel. It provides properties similar to 301 and can be used in most applications for 301. This alloy is non-magnetic in the annealed condition, but becomes magnetic when cold worked. The rate of work hardening is similar to Type 301, although type 201 develops somewhat higher

Stainless steel hexagon tube We are able to supply hexagonal tubing and other custom shaped tubing to customers worldwide with our experienced stuff and advanced devices Common grades of Stainless steel hexagon tube: 304 304L 321 316L 310S Shapes: Outer hexagon round hole Outer round hexagon hole Applications of Stainless steel hexagon tube: Industry Decoration Machinery parts Machining

654SMO /S32654 /1.4652 seamless pipe for demanding offshore applications 654SMO (UNS S32654 1.4652) is a high alloyed powder metallurgical austenitic stainless steel Corrosion resistance of 654SMO(S32654 1.4652) is better compared to any other commercial stainless steels In certain highly corrosive environments it can be used instead of nickel base super-alloys and titanium Applications of 654SMO /S32654 /1.4652 seamless pipe : Offshore (valve bodies, flanges, manifolds) Pulp

N08800 , N08825 and N10276 Stainless steel threaded flange Our factory is subject to a quality assurance system acc. DIN EN ISO 9001:2008, and our production approved acc. AD2000 Merkblatt W0(TÜV Rheinland), pressure equipment directive PED 97/23/EC(TUV Rheinland) Standard flanges supplied acc. DIN/EN, ASME/ANSI, JIS, AS with material grade 304/304L, 316/316L, 321/H, 316Ti, F44, 904L, F51, F53, F55, N08800, N08825 and N10276 Type of flanges supplied: Welding neck flange Plate

Heavy wall seamless stainless steel grade 310S Material: seamless stainless steel Diameter: 6-1,200mm Thickness: 0.5-85mm Maximum length: 18,000mm Certificate: BV/TUV//TUV/PED Packing: woven bag, wooden crate

304/304L, 316/316L, 321/H, 316Ti, F44, 904L, F51, Stainless steel spectacle blinds flange Our factory is subject to a quality assurance system according DIN EN ISO 9001:2008, and our production approved according AD2000 Merkblatt W0 (TÜV Rheinland), pressure equipment directive PED 97/23/EC (TUV Rheinland) Standard flanges supplied according DIN/EN, ASME/ANSI, JIS, AS with material grade 304/304L, 316/316L, 321/H, 316Ti, F44, 904L, F51, F53, F55, N08800, N08825 and N10276

304/304L, 316/316L, 321/H, 316Ti, F44, 904L, F51, F53, F55, Stainless steel slip-on flange Our factory is subject to a quality assurance system according DIN EN ISO 9001:2008, and our production approved according AD2000 Merkblatt W0 (TÜV Rheinland), pressure equipment directive PED 97/23/EC(TUV Rheinland) Standard flanges supplied according DIN/EN, ASME/ANSI, JIS, AS with material grade 304/304L, 316/316L, 321/H, 316Ti, F44, 904L, F51, F53, F55, N08800, N08825 and N10276

304/304L, 316/316L, 321/H, 316Ti, F44, 904L, F51, F53, F55, N08800, N08825 and N10276 Stainless steel blind flange Our factory is subject to a quality assurance system acc. DIN EN ISO 9001:2008, and our production approved acc. AD2000 Merkblatt W0(TÜV Rheinland), pressure equipment directive PED 97/23/EC(TUV Rheinland) Standard flanges supplied acc. DIN/EN, ASME/ANSI, JIS, AS with material grade 304/304L, 316/316L, 321/H, 316Ti, F44, 904L, F51, F53, F55, N08800, N08825 and